[Wi-Fi Direct] - Konica Minolta bizhub C3100i User Manual

[IPv6]
Uses IPv6 to specify the IP address.
[TCP/IP]
Configure the TCP/IP settings.
[IP Addressing]
Specify the method for acquiring an IP address.
[IP Address]
Display the IP address assigned to this machine. With [IP Addressing] set to [Manual Input], enter
the IP address.
[Subnet Mask]
Display the subnet mask assigned to this machine. With [IP Addressing] set to [Manual Input], enter
the subnet mask.
[Gateway Address]
Display the gateway address assigned to this machine. With [IP Addressing] set to [Manual Input],
enter the gateway address.
[Reset Wi-Fi]
Initializes wireless network settings. After performing this setting and restarting the machine, all the
wireless network settings are reset to their factory settings.

[Wi-Fi Direct]

This setting can be used when [Wi-Fi] is selected in [Network].

 Wi-Fi Direct cannot be used in an IPv6 or Ad-hoc environment.
Configure the Wi-Fi Direct network settings.
[Wi-Fi Direct]
Specify whether to enable or disable the Wi-Fi Direct network.
[Group Role]
[Group Owner]
Sets the machine as the group owner of the Wi-Fi Direct network. When the machine is set to the
group owner, the machine functions as the access point or wireless router.
[Auto]
Automatically specifies the group role of the machine.
6.8 [Network Settings]
59