Konica Minolta bizhub C3100i User Manual page 159

[HTTP]
You can configure the settings for HTTP.
[Port Number]
Enter the port number which accepts requests from your web browser.
 Do not use the same port number as other protocols.
 This setting becomes available when you restart the printer from Internet Services or manually turn off
and on the printer on the operator panel of the printer.
[CSRF Protection]
Specify whether to enable the CSRF (Cross-site Request Forgery) protection.
 When [CSRF Protection] is enabled, HTTP referer is checked. Internet Services is not available depending
on your network environment.
[HTTPS (SSL)]
Specify whether to enable SSL/TLS server communication.

[HTTPS Port Number]
This item appears when [HTTPS (SSL)] is enabled.
Enter the port number that accepts requests from your web browser. The default value is "443".
When the port number is changed, enter a colon (:) and the port number after the printer's IP
address, and then access to Internet Services with the format of
"https://Printer_IP_Address:Port_Number/".
Example: https://192.0.2.1:80/
 Do not use the same port number as other protocols.

[Connection Timeout]
Enter the timeout period to wait for a response from the web browser.
[Proxy Server]
Specify whether to enable the use of a proxy server.
 [Type]
This item appears when [Proxy Server] is enabled.
Select the type of the address.
 [IP Address : Port]
This item appears when [Proxy Server] is enabled and [IPv4] or [IPv6] is selected for [Type].
Enter the IP address that uses the proxy server and the port number.
 Text Box on the Left: Enter the IP address. The following characters can be entered:
- IP address or FQDN (Fully Qualified Domain Name) format
- Up to 255 bytes
 Text Box on the Right: Enter the port number.
11.4 Connectivity
159