18
GENESYS 30 User Guide
7. Remove the blank cuvette, place the sample cuvette in the measurement position, close
the lid and press
.
Tip
• Initially, six rows of sample data are displayed. On measuring the sixth sample an
additional four rows appear.
• Samples are labeled S1 through S10. Once the data table is full, save or print your
data, then clear the data table to measure additional samples.
Message bar - look here for
instructions and reports
Clear tool
Return to
Save tool
setup screen
Ten-sample
Table
Equation in use
Result values
Baseline status
indicator
Thermo Scientific