Quant - Thermo Scientific GENESYS 30 User Manual

Quant

Message bar - look here for
instructions and reports
Set the measurement
wavelength
Set the display unit
Select a linear data fit with a
non-zero intercept
Select a linear data fit forced
through zero
Thermo Scientific
Save tool
Clear tool
The GENESYS 30 Quant application supports up to six standard solutions and offers linear
fits with the option to force the line through zero.
1. Set the analytical wavelength.
a. Navigate to the Units tool and press
b. Select the units from the pop-up grid.
2. Enter the concentrations of your standard solutions.
Any number of standards up to 6 is allowed.
3. Navigate to the Conc field for STD1.
Use the keypad to enter the concentration of STD1 and press
The focus moves to the field for STD2.
.
to accept the value.
GENESYS 30 User Guide
Baseline status
indicator
13