Fieldmann FZK 70305-0 User Manual page 14

EN EN 14 14
Assembly
STEP 5: Attach The Cable Clips
1. Attach the cable onto the right-hand handlebar (D) using the cable clips (K) provided. This will keep the cable
secure and tight to the machine.
STEP 6: Cable Holder On Handle
Make sure the machine is disconnected from power before you do this. If the machine
is plugged in, you may accidentally press the trigger.
This holds the cable in place while in use and prevents strain on the cable.
1. Make a small loop in the power cable (Y).
2. Put the loop through the hole in the handle and on to the hook (U).
3. Slowly pull the loop to remove slack.
FZK 70305-0