Machine Description - Fieldmann FZK 70305-0 User Manual

EN EN 10 10

Machine description

5. MACHINE DESCRIPTION
A Main Unit
This is the main part of the machine.
B Lower Bars
The lowers bars connect to the main unit.
C Handle Bars
You must hold these with both hands when in
use.
D Middle Bar
The middle bar connects to the lowers bars.
E Tine Blades
F 2 × Wheels
These attach onto the wheel axle.
G 2 × Wheel Covers
These slot onto the wheels after you have
attached them onto the wheel axle.
H Wheel Axle
Assemble the wheels onto this.
H1 Wheel Axle Bracket
This attaches to the lower bars. There is a wheel
height adjuster pin which allows you to choose
from two positions. You can choose from the
working position (the wheels are up from the
ground and the transport position (the wheels
are on the ground).
I 2 × Washers For The Wheels
These are part of the wheel assembly.
J 2 × Spirt Pins
These are part of the wheel assembly.
Fig. 1
C
D
A
B
K Cable Clips
These keep the cable secure and tight to the
machine.
L 4 × Wing Nuts
These secure the bars together. You can loosen
them to fold the handlebar down for storage.
M 4 × Bolls
These secure the bars together.
N Upper Bar:
This connects to the middle bar.
O 2 × Bolts To Attach Wheel Axle To Machine
These secure the wheel axle onto the lower bars.
P 2 × Spacers
These slot onto the bolts (O).
Q 2 × Washers
These are part of attaching the wheel axle onto the
lower bars.
R 2 × Nuts
Use these to secure the wheel axle onto the lower
bars.
S 1 × Washer
This is part of attaching the wheel axle to the right-
hand lower bar (if stood behind the handlebars).
W Wheel Height Adjuster Pin
Use this pin to select a position for the wheels
(transport positon or working position).
F
E
FZK 70305-0