Thermostat Operations - Gree FP-22LM/D-K Owner's Manual

3.3 Thermostat operations

The thermostat backlight will be off after 20 continuous seconds without a key press on the panel or the
remote controller. Then, any key press on the panel will enable the backlight (that will flash once if the user
operates the remote controller) indicating that the user can begin to use the thermostat.
3.3.1 ON/OFF
As shown in Figure 1, press
operation mode, temperature and fan speed, among which only temperature appears if it is off.
3.3.2 Mode setting
As shown in the Figure 2, press
Switch sequence:
3.3.3 Fan speed
As shown in the Figure 2, press
unit.
Switch sequence:
(ON/OFF) to start or stop the unit. If it is on, the screen provides the
Figure 1
(MODE) to switch between three modes after starting the unit.
Figure 2
(SPEED) to switch between four speeds of the fan after starting the
Low Medium
speed speed
14
High Automatic
speed speed
Vertical Exposed Fan Coil Unit