Vertical Exposed Fan Coil Unit
Open the cover. Loosen three screws and lift the decorated panels (on left or right side) 1cm above and
remove them in a horizontal way.
Hang the unit by fiting the holes into expansion bolts.
Regulate the unit position to slightly tilt the drain pipe and tighten bolts with nuts.
Open the cover
Loosen screws
Remove it in
a horizontal way
Suspension hole
Wall
Nut
Bolt
Suspension hole
7
Lift the decorated panels
(on left or right side) 1cm above
After
Before
Suspension hole
Suspension hole