Gree FP-22LM/D-K Owner's Manual page 19

3.3.6 Child lock
After a start or stop of the unit, press keeping of both
child lock that will recover after the power failure.
As shown in the Figure 5, the symbol
of any other keys, reminding the user of the child lock functioning. The symbol
the child lock is off.
3.3.7 Sleep function
As shown in the Figure 6, during the operation of the unit, press keeping of
disables the function. When it is enabled, the homepage displays the symbol
Notes:
In the cooling mode, using the sleep function, the set temperature will rise 1°C after operating in 1 hour
and another 1°C in another 1 hour. The set temperature will rise 2°C at most and be steady at 28°C with
the function automatically disabled.
In the heating mode, using the sleep function, the set temperature will drop 1°C after operating in 1 hour
and another 1°C in another 1 hour. The set temperature will drop 2°C at most and be steady at 16°C with
the function automatically disabled.
The fan automatically runs at the low speed.
3.3.8 Parameter setting
After a stop of the unit, press keeping of both
setting page. Set the serial numbers of parameters by tapping
values by (UP) or
Next, press keeping of both
the parameter setting page automatically exits. Whereas, the parameter setting page automatically exits,
not saving all values without any operation in 20 seconds.
that appears will be activated to flash for 3 seconds by a press
(DOWN).
(SPEED) and
(UP) or
Figure 5
Figure 6
(SPEED) and
(MODE) and decide the parameter
(UP) ensures saving all the parameter values. Then,
16
Vertical Exposed Fan Coil Unit
(DOWN) enables or disables the
is not displayed when
(MODE) enables or
.
(UP) is an access to parameter