Gree FP-22LM/D-K Owner's Manual page 22

Vertical Exposed Fan Coil Unit
(4) Temperature unit setting
Celsius (°C) or Fahrenheit (°F) is available. As shown in the Figure 10, on the parameter setting page,
press (MODE) to switch the option number to 04.
between Celsius (°C) and Fahrenheit (°F).
(5) Fan operation at temperature set points
The fan is able to run at the set speed, low speed or stop working when the indoor ambient temperature
reaches the specific temperature point.
As shown in the Figure 11 on the parameter setting page, pressing
the option number 05.
adjusting the fan operation.
(6) Temperature calibration
The ambient temperature is allowed to calibrated between -5°C and +5°C with a precision of 0.5°C.
As shown in the Figure 12, on the parameter setting page, press
number to 06. (UP) or
(UP) or (DOWN) is provided to allow a switch between "00", "01" and "03",
(DOWN) is provided to a 0.5°C increase or decrease within -5°C~+5°C.
(UP) or (DOWN) is provided to allow a switch
Figure 10
Figure 11
Figure 12
19
(MODE) activates a switch to
(MODE) to switch the option