Gree FP-22LM/D-K Owner's Manual page 24

Vertical Exposed Fan Coil Unit
(9) Heating temperature set in the energy saving mode
It is available when energy saving function is enabled. The heating temperature is limited between 16°C
and 30°C (61°F~86°F).
As shown in the Figure 15, on the parameter setting page, press
number to 09. (UP) or
temperature unit is Celsius, the adjustment range of the temperature is16°C~30°C with a precision of
0.5°C. If the temperature unit is Fahrenheit, the adjustment range of the temperature is 61°F~86°F with a
precision of 1°F.
(10) Ambient temperature display
If the user enables the indoor ambient temperature display after the start-up of the unit, the indoor
ambient temperature will be displayed by default. While the user is setting a desirable temperature, the
screen provides the desirable temperature. The screen will display the indoor ambient temperature after 5
continuous seconds without a key press.
The screen will not display the indoor ambient temperature that was disabled but the set temperature.
As shown in the Figure 16, on the parameter setting page, press
number to 10. (UP) or
(DOWN) is provided to allow a rise or drop on the temperature. If the
Figure 15
(DOWN) is provided to allow a switch between ON and OFF.
Figure 16
21
(MODE) to switch the option
(MODE) to switch the option