Replacement Of Drive Belt - Honda HF2213 Shop Manual

6.4

Replacement of drive belt

1. Dismantle the engine pulley (see instructions in chapter
5.6) to free the belt.
2. Place the clutch/brake pedal in the parking position and
the gear lever in position 5.
3. Remove the clutch pulley [1] by unscrewing the central
nut [2] . Then, completely unscrew the nut [3] on the drive
engagement tightener [4] to make it easier to fit the new
belt.
4. When re-assembling, check the precise position of the belt
compared to the pegs and the runners (see 2.6).
5. Carry out the drive engagement adjustments (see 4.2).
Tightening torque
[2]
[3]
92
35 ÷ 40 Nm
20 ÷ 25 Nm