Face/Orientation Sorting Setting - Ribao BCS-160 User Manual

BCS-160 User Manual V1.6
Amount Batch(this is only suitable for MIX mode, under SDC and CNT mode, the Figure 4
interface will not show the B:0P, and can not switch batch mode by press arrow key). Under Quantity
Batch setting mode press "
According to the interface prompt please press numeric key to batch amount (1-9999999). After
setting press ENTER key to save and exit, the main interface will show B:1500A (it means the amount
batch is set at 1500); After setting if press ESC key, the setting is invalid and will not be saved.

6.4 Face/Orientation Sorting Setting

This function is only valid for MIX/SDC mode, the user can settle the face/orientation by pressing
"3 FACE/ORT" key. Press one time, the main interface will show F.，press two times it will show O.，
press three times it will show F.O., press again to turn off this function. When F. Is turned on, the
banknotes with the same face will go to stacker; When O. Is turned on, the same orientation
banknotes will go to stacker; When F.O. Is turned on at the same time, the banknotes with same face
and same orientation will go to stacker. The F.And O. Will highlight on the interface, the Figure 19
shows the machine is under MIX counting mode with face and orientation sorting function turned on.
Figure 17
" key to enter into Amount Batch setting interface.
Figure 18
14