User Setting; Batch Setting - Ribao BC-30 User Manual

BC-30 User Manual V1.4

6.10 User Setting

Press
press SET key continuously, the detection symbol on left corner will switch
according to bAT-UV-dd-db-SET-CC-bUZ in circle.

6.10.1 Batch setting

If the default Batch number does not satisfy you, you can also set manually,
the setting range is 0-200.
1) Press key to enter into setting interface, until the left corner shows
"bAT"
2) Press key,"bAT"will blink
3) press
example,155 as below picture shows:
key to enter into user setting interface as below picture,
key to adjust your desired nunmber, for
17