Table of Contents
Advertisement
BCS-160 User Manual V1.6
By following the indicative message on the screen, press ENTER key to confirm. After restoring
successfully, it will display the messages "Default setting is OK!", shown as Figure 54.
8.5.7 CIS calibration
Under Figure 46 interface to choose item 7. CIS calibration and press ENTER key to confirm.
After inputting the passwords 0508, it will come into the following interface, shown as Figure 55:
Before you begin the CIS calibration, please make sure you have inserted the calibration paper
correctly, otherwise it will cause problem. The calibration paper must cover the whole CIS sensor.
8.5.8 IP address setting
Under Figure 46 interface to choose item 8. IP setting and then press ENTER key to come into
the following interface and then set the IP address by pressing the numeric keys:
Figure 54
Figure 55
32
Advertisement
Table of Contents
