Table of Contents
Advertisement
BCS-160 User Manual V1.6
Figure 100
Figure 101
8) Align the slots on both sides of reject pocket with the rails on both sides of the rack, and load the
reject pocket into the rack horizontally.
Figure 102
Figure 103
9) Push the reject pocket horizontally and frontward, and then press frontward hard by both hands
until you hear the sound of "click" on the left and right sides, it indicates that the reject pocket t is
assembled properly.
Figure 104
10) Push the feeding roller forward by hand as below first picture, at same time, check whether the
two D18 pressure rollers and D22 axle wheels as below second picture are in full contact with each
other. If they are in full contact with each other when complete one rotation, it indicates the assembly
is in place. If there are untouched points during one rotation, it indicates that the assembly is not in
51
Advertisement
Table of Contents
