Table of Contents
Advertisement
BCS-160 User Manual V1.6
After software upgrade, please restart the machine referring to the following message.
10.2 IMAGEBOARD upgrading
Under interface Figure 65, press "
press ENTER to start software upgrading, shown as Figure 70 and Figure 71. If there is no software
file or file name is not correct, it will display warning messages shown as Figure 68.
After software upgrade, please restart the machine referring to the following message.
Figure 70
Figure 69
" or "
" key to choose "2. IMG BOARD" and then
Figure 72
39
Figure 71
Advertisement
Table of Contents
