BCS-160 User Manual V1.6
6. Operation Instruction
6.1 Turn on the machine
Connect the machine with power supply and turn on the machine, the machine will enter into
loading interface and self-testing interface, as shown in Figure 1. Please wait for about 1min and the
machine will initialize successfully and enter into main interface as Figure 2.
6.2 Selection of Counting Mode
6.2.1 Single Currency Counting Mode
*Note : Before counting please check the currency code area and confirm is the currency is
correct, if not, please adjust the currency according to below instructions (take USD for example).
Press "1 CURRENCY" key to enter into currency selection mode, as shown in Figure 3.
Under currency selection interface, and then move the arrow key to move the cursor to select the
currency, press "ENTER" key to save the setting and return to main interface; if press ESC key, then it
will not save the setting and return to main interface.(Figure 4 is to select the currency to be USD)
Figure 1
Figure 3
8
Figure 2