BCS-160 User Manual V1.6
7.
Check counting result and printing information
7.1 Check counting result
Under MIX mode or SDC mode, after counting, press "4 LIST" key to check the counting details
as shown by Figure 22 :
This interface is for checking the quantity and amount for each denomination you counted, as well
as the total amount.
7.2 Check Suspected Notes Details and Serial Number
7.2.1 Check Suspected Notes Details
After finish counting, if there are suspected notes in reject pocket and
reason, please press "5 REJECT/SN." key to enter into following interface(Figure 16) to check
detailed information. To exit from current interface you can press ESC key or put notes on hopper to
count directly.
Figure 21
Figure 22
16
want to check reject