Face/Orientation Sorting Setting - Ribao BCS-160 User Manual

BCS-160User Manual V1.6
150), shown as Fig.10. If it is B:0P, it means the machine will stop automatically
when it counts 200pcs notes.
Amount Batch(this is only suitable for MIX mode, under SDC and CNT mode,
the Fig 4 interface will not show the B:0P, and can not switch batch mode by
press arrow key). Under Quantity Batch setting mode press
enter into Amount Batch setting interface
According to the interface prompt please press numeric key to batch
amount (1-9999999). After setting press ENTER key to save and exit, the main
interface will show B:1500A(it means the amount batch is set at 1500); After
setting if press ESC key, the setting is invalid and will not be saved.

6.5 Face/Orientation Sorting Setting

This function is only valid for MIX/SDC mode, the user can settle the
face/orientation by pressing
interface will show F.，press two times it will show O.，press three times it will
show F.O., press again to turn off this function.
banknotes with the same face will go to stacker; When O. Is turned on, the same
orientation banknotes will go to stacker; When F.O. Is turned on at the same
Fig.10
Fig.11
key. Press one time, the main
When F. Is turned on, the
17 / 57
key to