Zeiss Humphrey matrix User Manual page 57

Electromagnetic Compatibility (EMC)
EN 60601-1-2:2001
• IEC 1000-4-2:1995 Electrostatic Discharge Immunity
• IEC 1000-4-3:1995 Radiated Electromagnetic Field Immunity
• IEC 1000-4-4:1995 Electrical Fast Transient Immunity
• IEC 1000-4-5:1995 Surge Immunity
• IEC 1000-4-6:1996 Conducted RF Immunity
• IEC 1000-4-8:1993 Power Frequency Magnetic Field Immunity
• IEC 1000-4-11:1994 Voltage Dips & Variations
• EN 55011:1998 Radiated & Conducted Emissions; Group 1, Class B
• IEC 61000-3-2:1995+A14 Power Harmonics; Class A
• IEC 61000-3-3:1995 Voltage Fluctuation (Flicker); Section 5
Guidance and manufacturer's declaration - electromagnetic emissions
The Humphrey Matrix is intended for use in the electromagnetic environment specified below.
The customer or the user of the Humphrey Matrix should assure that it is used in such an
environment.
Emissions Test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
Humphrey Matrix Visual Field Instrument
Rev. D 08/21/06 PN 701692
Compliance Electromagnetic Environment - Guidance
The Humphrey Matrix uses RF energy only
for its internal function. therefore, its RF
Group 1 emissions are very low and are not likely to
cause any interference in nearby electronic
equipment.
Class B
The Humphrey Matrix is suitable for use in all
establishments, including domestic
establishments and those directly connected
Class A
to the public low-voltage power supply
network that supplies buildings used for
domestic purposes.
Complies
53