Preparation For Use - Zeiss Humphrey matrix User Manual

PREPARATION FOR USE

Once you've chosen a location, carefully lay the instrument on its side to prepare the instrument
for use by connecting all of the components.
PATIENT RESPONSE BUTTON CONNECTION
Plug the Patient Response Button connector into the small round
connector jack towards the patient end, underneath the base of the
unit (at the center) and near the patient response button symbol.
KEYBOARD/TOUCH PAD CONNECTIONS
While the unit is still on its side, plug the keyboard and touch pad
connectors into their jacks. Their jacks are located underneath the
base of the unit near the keyboard and mouse symbols, towards the
operator's side. Match the symbols on the connectors with the labels
on the jacks. Plug the purple connector into the keyboard jack, the
green connector to the mouse jack.
Open the Printer shipping box by carefully cutting the packing tape securing the top flaps of the
box. Remove the printer, USB cable, power cord, Printer information, and Printer software CD
(for reference only) from the printer box. To protect the printer during shipping some
components were secured with tape and packing material. Make sure all tape and packing
material is removed before operating the printer.
To achieve satisfactory results, read the Printer information thoroughly before using the printer.
Refer to the Printer information to install the print cartridges to complete the printer set-up.
Once the printer set-up is completed, connect the Printer USB cable to the USB port on the
printer, and then connect the Printer Power cord to the printer.
PRINTER (USB) CONNECTION
Plug the Universal Serial Bus (USB) printer cable supplied with the
printer into the USB jack located underneath the base, adjacent to
the keyboard and mouse connections.
Humphrey Matrix Visual Field Instrument 7
Rev. D 08/21/06 PN 701692