Making Basic Operation Settings For The Printer - Epson AL-M8250DN User Manual

Administrator Information
Messages
POP3 server authentication error.
Check the followings. - Authentication
Method - Authenticated Account -
Authenticated Password
Unsupported communication method.
Check the followings. - SMTP Server
Address - SMTP Server Port Number
Connection to SMTP server failed.
Change Secure Connection to None.
Connection to SMTP server failed.
Change Secure Connection to SSL/TLS.
Connection to SMTP server failed.
Change Secure Connection to
STARTTLS.
The connection is untrusted. Check the
following. - Date and Time
The connection is untrusted. Check the
following. - CA Certificate
The connection is not secured.
SMTP server authentication failed.
Change Authentication Method to
SMTP-AUTH.
SMTP server authentication failed.
Change Authentication Method to
POP before SMTP.
Sender's Email Address is incorrect.
Change to the email address for your
email service.
Cannot access the printer until
processing is complete.

Making Basic Operation Settings for the Printer

Setting the Control Panel
Setup for the printer's control panel. You can set up as follows.
1. Access Web Config and select the Device Management tab > Control Panel.
2. Set up the following items as necessary.
❏ Language
Select the displayed language on the control panel.
>
Settings to Use the Printer
This message appears when POP3 server authentication failed.
This message appears when you try to communicate with unsupported protocols.
This message appears when an SMTP mismatch occurs between a server and a
client, or when the server does not support SMTP secure connection (SSL
connection).
This message appears when an SMTP mismatch occurs between a server and a
client, or when the server requests to use an SSL/TLS connection for an SMTP
secure connection.
This message appears when an SMTP mismatch occurs between a server and a
client, or when the server requests to use an STARTTLS connection for an SMTP
secure connection.
This message appears when the printer's date and time setting is incorrect or the
certificate has expired.
This message appears when the printer does not have a root certificate
corresponding to the server or a CA Certificate has not been imported.
This message appears when the obtained certificate is damaged.
This message appears when an authentication method mismatch occurs between
a server and a client. The server supports SMTP AUTH.
This message appears when an authentication method mismatch occurs between
a server and a client. The server does not support SMTP AUTH.
This message appears when the specified sender's Email address is wrong.
This message appears when the printer is busy.
238
>
Making Basic Operation Settings for the Printer
Cause