Table of Contents
Advertisement
Administrator Information
Note:
You can also set up from the printer's control panel.
Settings > General Settings > Basic Settings > Quick Sleep
Making a Weekly Sleep Schedule
You can set a sleep pattern according to the usage activity. Use Web Config to make this setting.
1. Access Web Config and select the Device Management tab > Power Saving > Sleep Schedule.
2. Set the Start Time and Power Saving Mode for each of the five time periods.
You can select the following Power Saving Mode options.
❏ On
Enters sleep mode according to the Sleep Timer settings.
❏ Quick
Enters sleep mode immediately when inactivity occurs.
For example, if you want the printer to sleep on Monday as shown in the following figure, make settings as
shown in the Sleep Schedule screenshot below.
❏
:
During this time period, it enters sleep mode immediately.
❏
:
During this time period, it enters sleep mode according to the Sleep Timer settings.
3. Click OK.
>
Settings to Use the Printer
240
>
Making Basic Operation Settings for the Printer
Advertisement
Table of Contents
