Table of Contents
Advertisement
Important Instructions
❏ Be careful not to touch anywhere near the transfer roller, which is marked with a caution label, or the
surrounding areas. There are sharp edges around the transfer roller that could injure your fingers. Be careful not
to touch these edges.
❏ Be careful not to touch the fuser unit cover, which is marked with a caution label, or the surrounding areas. If
the printer has been in use, the fuser unit cover and the surrounding areas may be very hot. If you must touch
one of these areas, turn off the printer and wait for at least 40 minutes to allow the heat to disperse before doing
so.
>
Important Safety Instructions
16
>
Using the Printer
Advertisement
Table of Contents
