Solving Problems
The printer driver settings do not match the barcodes. (Windows)
Solutions
❏ For the Quality setting, select Fine (600 dpi) or select More Settings, and then move the slider to the
Quality side.
❏ Select the Maintenance tab, Extended Settings, and then select Barcode mode.
❏ Select the More Options tab > Image Options, and then disable Emphasize Thin Lines.
Cannot Print Collated Pages
The collated setting is selected in the printer driver and application (Windows).
Solutions
If you make collated settings in the printer driver and the application from which you are printing, you
may not be able to perform collated printing correctly. When you have made collated settings in the
application, do not make settings in the printer driver.
Last Page is Printed on Opposite Side in 2-sided Printing
The One-side 2-sides conversion setting is wrong.
Solutions
Select Settings > General Settings > Printer Settings > PDL Print Configuration > Common Settings,
and then set Convert to Simplex to Off.
The Font Cannot be Printed.
>
Print Quality is Poor
132