Internal Laser Radiation; Ozone Safety; Protecting Your Personal Information - Epson AL-M8250DN User Manual

Important Instructions
>

Protecting Your Personal Information

Internal Laser Radiation

There is a Class III b Laser Diode Assembly that has an invisible laser beam inside the printer head unit. The
printer head unit is NOT A SERVICE ITEM, therefore, the printer head unit should not be opened under any
circumstances. An additional laser warning label is affixed to the inside of the printer.

Ozone Safety

Ozone Emission
Ozone gas is generated by laser printers as a by-product of the printing process. Ozone is produced only when the
printer is printing.
Ozone Exposure Limit
The Epson laser printer generates less than 1.5 mg/h of continuous printing.
Minimize the Risk
To minimize the risk of exposure to ozone, you should avoid the following conditions:
❏ Use of multiple laser printers in a confined area
❏ Operation in conditions of extremely low humidity
❏ Poor room ventilation
❏ Long, continuous printing together with any of the above
Printer Location
The printer should be located so that the exhaust gases and heat generated are:
❏ Not blown directly into the user's face
❏ Vented directly out of the building whenever possible
Protecting Your Personal Information
When you give the printer to someone else or dispose of it, erase all the personal information stored in the printer's
memory by selecting Settings > General Settings > System Administration > Restore Default Settings > All
Settings on the control panel. Also, make sure you delete the printer's internal memory data by selecting Settings
> General Settings > System Administration > Clear Internal Memory Data on the control panel.
19