Table of Contents
Advertisement
Loading Paper
>
Paper Eject Setting
Important:
c
❏ Do not pull out two or more paper cassettes at the same time. Doing so may cause the printer to become unstable
and fall down.
❏ Do not pull out a paper cassette while printing.
❏ Do not push the paper cassette with too much force. Doing so may cause the paper to become misaligned causing
a skewed feed or paper jam.
❏ Do not load more than the maximum number of sheets specified for envelopes as it may cause paper feed
problems.
❏ Be sure to adjust the edge guide to the size of the paper being loaded. If the paper size is incorrect, it may cause a
paper feed problem, paper jam, or error.
❏ If setting for the paper size setting dial differs from the loaded paper size, paper jams or errors may occur. Make
sure these settings match.
❏ If the paper type is not set correctly, it may cause printing problems.
❏ When printing on paper other than standard paper, be sure to specify the paper size in User Defined Size
(Windows) / Manage Custom Size (Mac OS) in the printer driver. If you continue to print with a different
paper size selected, the fuser inside the printer may be damaged.
Note:
If the paper runs out during printing, a buzzer will sound. You can adjust the volume to High, Medium, Low, or Off. If
Mute is set on the control panel, the buzzer does not sound.
Related Information
"Available Paper and Capacities" on page 176
&
Loading Envelopes
Load envelopes with the printable side facing up in the paper tray.
Paper Eject Setting
Eject the paper with the printed side facing down. For A4 size plain paper, you can eject up to 550 sheets at a time.
For paper that can be loaded vertically or horizontally (A4/A5), you can change the paper ejection direction. In
addition, when printing in sets, the sets can be output alternately vertically and horizontally making them easier to
stack.
33
Advertisement
Table of Contents
