Table of Contents
Advertisement
Important Instructions
❏ Leave adequate room around the printer to allow for sufficient ventilation.
Using the Printer
❏ Some of the symbols used on your printer are to ensure safety and proper use of the printer. Visit the following
web site to learn the meaning of the symbols:
http://support.epson.net/symbols
CAUTION: Hot surface
Be careful not to touch the fuser, which is marked with a caution label, or the surrounding areas. If the printer has
been in use, the fuser and the surrounding areas may be very hot. If you must touch one of these areas, wait 40
minutes to allow the heat to subside before doing so.
Do not touch the Sharp edges
Be careful of the sharp edges. Do not touch the sharp edges. It may hurt your fingers, etc.
❏ Be careful not to touch the fuser unit, which is marked with a caution label, or the surrounding areas. If the
printer has been in use, the fuser unit and the surrounding areas may be very hot. If you must touch one of
these areas, turn off the printer and wait for at least 40 minutes to allow the heat to disperse before doing so.
>
Important Safety Instructions
15
>
Using the Printer
Advertisement
Table of Contents
