Making Basic Operation Settings For The Printer - Epson WorkForce WF-7830 Series User Manual

Administrator Information
The setting item below on the printer's control panel is set to Yes, and the faxes received can be saved
on the computer.
Settings > General Settings > Fax Settings > Receive Settings > Fax Output Settings > Save to
Computer
Making Save to Computer Setting to Also Print on the Printer to Receive Faxes
You can make the setting to print received faxes on the printer as well as save them on a computer.
1. Select Settings on the home screen on the printer's control panel.
2. Select General Settings > Fax Settings > Receive Settings.
3. Select Fax Output Settings > Save to Computer > Yes and Print.
Making Save to Computer Setting not to Receive Faxes
To set the printer not to save received faxes on the computer, change the settings on the printer.
Note:
You can also change the settings using the FAX Utility. However, if there are any faxes that have been unsaved
to the computer, the feature does not work.
1. Select Settings on the home screen on the printer's control panel.
2. Select General Settings > Fax Settings > Receive Settings.
3. Select Fax Output Settings > Save to Computer > No.
Related Information
"Running Web Config on a Web Browser" on page 266
&

Making Basic Operation Settings for the Printer

Setting the Control Panel
Setup for the printer's control panel. You can set up as follows.
1. Access Web Config and select the Device Management tab > Control Panel.
2. Set up the following items as necessary.
❏ Language
Select the displayed language on the control panel.
❏ Operation Timeout
If you select ON, when you log in as the access control user or administrator, you are automatically logged
out and go to the initial screen if there is no activity for a certain period of time.
You can set between 10 seconds and 240 minutes by the second.
>
Settings to Use the Printer
346
>
Making Basic Operation Settings for the Printer