Cleaning The Game Board And Surrounding Parts - Sega Racing Classic Owner's Manual

15-1 CLEANING THE GAME BOARD AND SURROUNDING PARTS

Clean the game board and surrounding parts once a year, or when an "Error 0090"
or "Error 0091" appears.
Clean the game board exhaust vent area and surrounding parts once a year with a vacuum cleaner.
1
Turn off the power switch of the cabinet.
2
Remove 1 truss screw each from left and right sides of Base Lid.
3
Unlock the base with the master key.
4
Turn the lock handle on Base Lid R to unlock the lid.
5
Lower the seat towards. Slowly lower the backrest until it touches the floor to prevent damage to the seat
part. Put a drop cloth on the floor to prevent damaging the surface of the seat part.
6
The game board (RINGWIDE) is inside the base. Clean it with a vacuum cleaner. Clear the RINGWIDE
exhaust vent and other surrounding RINGWIDE parts of dust. (See RINGWIDE Service Manual, Chapter 7.)
Unlock
RINGWIDE
RINGWIDE (GAME BOARD)
LOCK HANDLE
TRUSS SCREW (2), black
M5 x 12
DROP CLOTH TO PREVENT DAMAGE
69
15