Ford ENDURA 2017 Owner's Manual page 95

Keys and Keyless Entry
Message
To START Press Brake
No Key Detected
Restart Now or Key is
Needed
Run Power Active
Starting System Fault
Key Program Successful
Key Program Failure
Max Number of Keys
Learned
Not Enough Keys
Learned
Key Battery Low Replace
Soon
Engine ON
Endura (CDQ) New Zealand, enNZL, Edition date: 201712, First Printing
Information Displays
A reminder to press the brake while starting the vehicle.
The system does not detect a key in your vehicle. See Keyless
You pressed the start/stop button to switch off the engine
and your vehicle does not detect your intelligent access key
Your vehicle is in the run ignition state.
There is a problem with your vehicle's starting system. See
an authorized dealer for service.
You have successfully programmed an intelligent access key
You have failed to program an intelligent access key to the
You have programmed the maximum number of keys to the
You have not programmed enough keys to the system.
The key battery is low. Change the battery as soon as possible.
Informs you that they you are exiting your vehicle and the
92
Action
Starting (page 116).
inside your vehicle.
to the system.
system.
system.
engine is on.