Page 1 2013 fordowner.com ford.ca DT4J 19A321 AA September 2013 Fourth Printing Owner’s Manual Edge Litho in U.S.A.
Page 2: Table Of Contents
Table of Contents Introduction Child Safety Child seats ......... . .19 Child seat positioning .
Page 3 Table of Contents MyKey Settings, MyKey ........64 Creating.
Page 4: Table Of Contents
Table of Contents Windows and Mirrors Power windows ........96 Exterior mirrors .
Page 5 Table of Contents Seats Sitting in the correct position ......158 Head restraints........159 Front manual seats .
Page 6: Table Of Contents
Table of Contents Brakes Brakes ..........206 Hints on driving with anti-lock brakes .
Page 7 Table of Contents Driving Hints Economical driving ........256 Driving through water .
Page 8: Table Of Contents
Table of Contents Air filter(s) .........300 Adjusting the headlamps .
Page 9 Errors and omissions excepted. © Ford Motor Company 2013 2013 Edge (edg) Owners Guide gf, 4th Printing, November 2012...
Page 10: Introduction
Introduction ABOUT THIS MANUAL Thank you for choosing Ford. We recommend that you take some time to get to know your vehicle by reading this manual. The more that you know about it, the greater the safety and pleasure you will get from driving it.
Page 11 Introduction SYMBOL GLOSSARY WARNING: You risk death or serious injury to yourself and others if you do not follow the instruction highlighted by the warning symbol. These are some of the symbols you may see on your vehicle. Symbol Description Symbol Description Symbol Description Safety alert...
Page 12 In order to properly diagnose and service your vehicle, Ford Motor Company, Ford of Canada, and service and repair facilities may...
Page 13 EDR. Ford Motor Company and Ford of Canada do not access event data recorder...
Page 14 If you do not want Ford or its vendors to receive this information, do not activate the service. Ford Motor Company and the vendors it uses to provide you with this information do not store your vehicle travel information.
Page 15 Introduction FORD CREDIT (U.S. ONLY) Ford Credit offers a full range of financing and lease plans to help you acquire your vehicle. If you have financed or leased your vehicle through Ford Credit, thank you for your business. For your convenience, we offer a number of ways to contact us, as well as help manage your account.
Page 16 Introduction SPECIAL NOTICES New Vehicle Limited Warranty For a detailed description of what is covered and what is not covered by your vehicle’s New Vehicle Limited Warranty, see the warranty information that is provided to you along with your owner’s manual. Special Instructions For your added safety, your vehicle is fitted with sophisticated electronic controls.
Page 17 Introduction EXPORT UNIQUE (NON–UNITED STATES/CANADA) VEHICLE SPECIFIC INFORMATION For your particular global region, your vehicle may be equipped with features and options that are different from the features and options that are described in this owner’s manual. A market unique supplement may be supplied that complements this book.
Page 18: Child Safety
NHTSA and other safety organizations, or are the minimum requirements of law. Ford recommends checking with a NHTSA Certified Child Passenger Safety Technician (CPST) and consulting your pediatrician to make sure your child seat is appropriate for your child, and is compatible with and properly installed in your vehicle.
Page 19 Child Safety Recommendations for Safety Restraints for Children Recommended Child size, height, weight, or age restraint type Infants Children weighing 40 lb (18 kg) or Use a child safety seat less (generally age four or younger). (sometimes called an toddlers infant carrier, convertible seat, or toddler seat).
Page 20: Child Seats
Child Safety CHILD SEATS Use a child safety seat (sometimes called an infant carrier, convertible seat, or toddler seat) for infants, toddlers or children weighing 40 pounds (18 kilograms) or less (generally age four or younger). CHILD SEAT POSITIONING WARNING: Airbags can kill or injure a child in a child seat. NEVER place a rear-facing child seat in front of an active airbag.
Page 21 Child Safety WARNING: Never use pillows, books, or towels to boost a child. They can slide around and increase the likelihood of injury or death in a crash. WARNING: Always restrain an unoccupied child seat or booster seat. These objects may become projectiles in a crash or sudden stop, which may increase the risk of serious injury.
Page 22: Booster Seats
Child Safety Note: The child seat must rest tightly against the vehicle seat upon which it is installed. It may be necessary to lift or remove the head restraint. See the Seats chapter for information on head restraints. BOOSTER SEATS WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduces the protection for the upper part of the body and may increase the risk...
Page 23 Child Safety Types of Booster Seats • Backless booster seats If your backless booster seat has a removable shield, remove the shield. If a vehicle seating position has a low seat back or no head restraint, a backless booster seat may place your child’s head (as measured at the tops of the ears) above the top of the seat.
Page 24 Child Safety If the booster seat slides on the vehicle seat upon which it is being used, placing a rubberized mesh sold as shelf or carpet liner under the booster seat may improve this condition. Do not introduce any item thicker than this under the booster seat.
Page 25: Installing Child Safety Seats
Child Safety INSTALLING CHILD SEATS Using Lap and Shoulder Belts WARNING: Airbags can kill or injure a child in a child seat. NEVER place a rear-facing child seat in front of an active airbag. If you must use a forward-facing child seat in the front seat, move the seat all the way back.
Page 26 Child Safety 1. Position the child safety seat in a seat with a combination lap and shoulder belt. 2. Pull down on the shoulder belt and then grasp the shoulder belt and lap belt together. 3. While holding the shoulder and lap belt portions together, route the tongue through the child seat according to the child seat...
Page 27 Child Safety 4. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) for that seating position until you hear a snap and feel the latch engage. Make sure the tongue is latched securely by pulling on it.
Page 28 There should be no more than 1 inch (2.5 centimeters) of movement for proper installation. Ford recommends checking with a NHTSA Certified Child Passenger Safety Technician (CPST) to make certain the child restraint is properly installed.
Page 29 Child Safety The LATCH system is composed of three vehicle anchor points: two lower anchors located where your vehicle seatback and seat cushion meet (called the seat bight) and one top tether anchor located behind that seating position. LATCH compatible child safety seats have two rigid or webbing mounted attachments that connect to the two lower anchors at the LATCH equipped seating positions in your vehicle.
Page 30 Child Safety Use of Inboard Lower Anchors from the Outboard Seating Positions (Center Seating Use) WARNING: The standardized spacing for LATCH lower anchors is 11 inches (28 centimeters) center to center. Do not use LATCH lower anchors for the center seating position unless the child seat manufacturer’s instructions permit and specify using anchors spaced at least as far apart as those in this vehicle.
Page 31 Child Safety Once the child safety seat has been installed using either the safety belt, the lower anchors of the LATCH system, or both, you can attach the top tether strap. The tether strap anchors in your vehicle are in the following positions (shown from top view): Perform the following steps to install a child safety seat with tether anchors:...
Page 32: Child Safety Locks
4. Tighten the child safety seat tether strap according to the manufacturer’s instructions. If your child restraint system is equipped with a tether strap, and the child restraint manufacturer recommends its use, Ford also recommends its use. CHILD SAFETY LOCKS The childproof locks are located on the rear edge of each rear door and must be set separately for each door.
Page 33: Safety Belts
Safety Belts PRINCIPLES OF OPERATION WARNING: Never let a passenger hold a child on his or her lap while your vehicle is moving. The passenger cannot protect the child from injury in a crash. WARNING: It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle.
Page 34 Safety Belts WARNING: When possible, all children 12 years old and under should be properly restrained in a rear seating position. Failure to follow this could seriously increase the risk of injury or death. WARNING: Safety belts and seats can become hot in a vehicle that has been closed up in sunny weather;...
Page 35: Fastening The Safety Belts
Safety Belts FASTENING THE SAFETY BELTS The front outboard and rear safety restraints in your vehicle are combination lap and shoulder belts. 1. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) until you hear a snap and feel it latch.
Page 36 Safety Belts To adjust the comfort guide: 1. Slip the shoulder belt into the belt guide. 2. Slide the guide up or down along the webbing so that the belt is centered on the occupant’s shoulder. Restraint of Pregnant Women WARNING: Always ride and drive with your seatback upright and the safety belt properly fastened.
Page 37 Safety Belts WARNING: BELT AND RETRACTOR ASSEMBLY MUST BE REPLACED if the safety belt assembly automatic locking retractor feature or any other safety belt function is not operating properly when checked by an authorized dealer. Failure to replace the belt and retractor assembly could increase the risk of injury in crashes. All safety restraints in the vehicle are combination lap and shoulder belts.
Page 38: Safety Belt Height Adjustment
Safety Belts How to Use the Automatic Locking Mode 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until the entire belt is pulled out. 3. Allow the belt to retract. As the belt retracts, you will hear a clicking sound.
Page 39: Safety Belt Warning Light And Indicator Chime
Safety Belts Adjust the height of the shoulder belt so the belt rests across the middle of your shoulder. To adjust the shoulder belt height: 1. Pull on the center button and slide the height adjuster up or down. 2. Release the button and pull down on the height adjuster to make sure it is locked in place.
Page 40: Safety Belt-Minder
Safety Belts SAFETY BELT-MINDER® This feature supplements the safety belt warning function by providing additional reminders by intermittently sounding a chime and illuminating the safety belt warning light when the driver’s or front passenger’s seat is occupied and the safety belt is unbuckled. The system uses information from the front passenger sensing system to determine if a front seat passenger is present and therefore potentially in need of a warning.
Page 41 Safety Belts Deactivating and Activating the Belt-Minder® Feature WARNING: While the system allows you to deactivate it, this system is designed to improve your chances of being safely belted and surviving an accident. We recommend you leave the system activated for yourself and others who may use the vehicle. To reduce the risk of injury, do not deactivate or activate the system while driving the vehicle.
Page 42: Child Restraint And Safety Belt Maintenance
Ford Motor Company recommends that all safety belt assemblies in use in vehicles involved in a crash be replaced. However, if the crash was minor and an authorized dealer finds that the belts do not show damage and continue to operate properly, they do not need to be replaced.
Page 43: Personal Safety System
Personal Safety System PERSONAL SAFETY SYSTEM™ The Personal Safety System provides an improved overall level of frontal crash protection to front seat occupants and is designed to help further reduce the risk of airbag-related injuries. The system is able to analyze different occupant conditions and crash severity before activating the appropriate safety devices to help better protect a range of occupants in a variety of frontal crash situations.
Page 44: Supplementary Restraints System
Supplementary Restraints System PRINCIPLES OF OPERATION WARNING: Airbags do not inflate slowly or gently, and the risk of injury from a deploying airbag is the greatest close to the trim covering the airbag module. WARNING: All occupants of your vehicle, including the driver, should always properly wear their safety belts, even when an airbag supplemental restraint system is provided.
Page 45 Supplementary Restraints System The airbags are a supplemental restraint system and are designed to work with the safety belts to help protect the driver and right front passenger from certain upper body injuries. Airbags do not inflate slowly; there is a risk of injury from a deploying airbag. Note: You will hear a loud bang and see a cloud of harmless powdery residue if an airbag deploys.
Page 46: Driver And Passenger Airbags
Supplementary Restraints System DRIVER AND PASSENGER AIRBAGS WARNING: Never place your arm or any objects over an airbag module. Placing your arm over a deploying airbag can result in serious arm fractures or other injuries. Objects placed on or over the airbag inflation area may cause those objects to be propelled by the airbag into your face and torso causing serious injury.
Page 47 Supplementary Restraints System Proper Driver and Front Passenger Seating Adjustment WARNING: The National Highway Traffic Safety Administration recommends a minimum distance of at least 10 inches (25 centimeters) between an occupant’s chest and the driver airbag module. To properly position yourself away from the airbag: •...
Page 48: Front Passenger Sensing System
Supplementary Restraints System FRONT PASSENGER SENSING SYSTEM WARNING: Even with Advanced Restraints Systems, children 12 and under should be properly restrained in a rear seating position. Failure to follow this could seriously increase the risk of injury or death. WARNING: Sitting improperly out of position or with the seat back reclined too far can take off weight from the seat cushion and affect the decision of the front passenger sensing system, resulting in serious injury or death in a crash.
Page 49 Supplementary Restraints System The front passenger sensing system uses a passenger airbag status indicator which will illuminate indicating that the front passenger frontal airbag is either ON (enabled) or OFF (disabled). The indicator lamp is located in the center stack of the instrument panel.
Page 50 Supplementary Restraints System • Restart the vehicle and have the person remain in this position for about two minutes. This will allow the system to detect that person and enable the passenger’s frontal airbag. • If the indicator OFF lamp remains lit even after this, the person should be advised to ride in the rear seat.
Page 51 If it is necessary to modify an advanced front airbag system to accommodate a person with disabilities, contact the Ford Customer Relationship Center at the phone number shown in the Customer Assistance section of this owner’s manual.
Page 52: Side Airbags
Supplementary Restraints System SIDE AIRBAGS WARNING: Do not place objects or mount equipment on or near the airbag cover, on the side of the seatbacks (of the front seats), or in front seat areas that may come into contact with a deploying airbag.
Page 53: Safety Canopy Curtain Airbags
Supplementary Restraints System The system consists of the following: • a tag on the seatback indicating that side airbags are found on your vehicle • side airbags located inside the seatback of the driver and front passenger seats. • crash sensors and monitoring system with readiness indicator.
Page 54 Supplementary Restraints System WARNING: All occupants of your vehicle including the driver should always wear their safety belts even when an airbag supplemental restraint system and curtain airbag is provided. Failure to properly wear your safety belt could seriously increase the risk of injury or death.
Page 55: Crash Sensors And Airbag Indicator
Supplementary Restraints System Children 12 years old and under should always be properly restrained in the rear seats. The Safety Canopy will not interfere with children restrained using a properly installed child or booster seat because it is designed to inflate downward from the headliner above the doors along the side window opening.
Page 56: Airbag Disposal
Supplementary Restraints System If any of these things happen, even intermittently, have the supplemental restraint system serviced at an authorized dealer immediately. Unless serviced, the system may not function properly in the event of a crash. The safety belt pretensioners and the airbag supplemental restraint system are designed to activate when the vehicle sustains frontal or sideways deceleration sufficient to cause the restraints control module to deploy a safety device or when a certain likelihood of a rollover event is...
Page 57: Keys And Remote Control
Keys and Remote Control PRINCIPLE OF OPERATION The remote control allows you to: • remotely lock or unlock the vehicle doors • unlock the doors without actively using a key or remote control (intelligent access only) • remotely open the power liftgate (if equipped) •...
Page 58: Remote Control
Keys and Remote Control The radio frequency used by your remote control can also be used by other short-distance radio transmissions, for example amateur radios, medical equipment, wireless headphones, remote controls and alarm systems. If the frequencies are jammed, you will not be able to use your remote control.
Page 59 Keys and Remote Control Note: Your vehicle’s keys came with a security label that provides important key cut information. Keep the label in a safe place for future reference. Intelligent Access Key (If Equipped) Your intelligent access keys operate the power locks and the remote start system.
Page 60 Keys and Remote Control Replacing the Battery Note: Refer to local regulations when disposing of transmitter batteries. Note: Do not wipe off any grease on the battery terminals or on the back surface of the circuit board. Note: Replacing the battery will not delete the transmitter from your vehicle.
Page 61 Keys and Remote Control 3. Remove the old battery. 4. Insert a new battery with the + facing downward. Press the battery down to make sure it is fully in the housing. 5. Snap the battery cover back onto the transmitter and install the backup key.
Page 62 Keys and Remote Control Deactivating from the Remote Control 1. Press and hold the desired memory button for five seconds. A tone will sound after about two seconds. Continue to hold until you hear a second tone. 2. Press the unlock button on the remote control within three seconds. Repeat this procedure for each additional remote control if desired.
Page 63 Keys and Remote Control The remote start system will not work if: • the ignition is on • the alarm system is triggered • you disable the feature • the hood is open • the transmission is not in P •...
Page 64: Replacing A Lost Key Or Remote Control
Keys and Remote Control Extending the Vehicle Run Time Repeat Steps 1 and 2 with your vehicle still running to extend the run time for another remote start duration. If the duration is set to last 10 minutes, the duration will extend by another 10 minutes beginning after what is left of the first activation time.
Page 65: Mykey
MyKey PRINCIPLES OF OPERATION MyKey allows you to program keys with restricted driving modes to promote good driving habits. All but one of the keys programmed to the vehicle can be activated with these restricted modes. Any keys that have not been programmed are referred to as administrator keys or admin keys.
Page 66: Creating
MyKey • Vehicle speed minders of 45, 55 or 65 mph (75, 90 or 105 km/h). Once you select a speed, it will be shown in the display, followed by an audible tone when the preselected vehicle speed is exceeded. •...
Page 67: Clearing
MyKey 3. Use the arrow buttons to get to a configurable feature. 4. Press OK or > to make a selection. Note: You can clear or change your MyKey settings at any time during the same key cycle as you created the MyKey. Once you have switched the engine off, however, you will need an admin key to change or clear your MyKey settings.
Page 68: Remote Start, Mykey
MyKey is not compatible with non-Ford-approved aftermarket remote start systems. If you choose to install a remote start system, please see your Ford authorized dealer for a Ford-approved remote start system . Vehicles With Ford-approved Aftermarket Remote Start Systems When using a Ford-approved aftermarket remote start system, the vehicle recognizes the remote start system as an additional admin key.
Page 69 MyKey compatible with non-Ford-approved remote start systems, but may help you retain some MyKey functions. When using a non-Ford-approved remote start system, the vehicle may recognize the remote start system as an additional admin key with its associated privileges. If you restart the vehicle by inserting a key into the ignition cylinder and recycling the ignition completely, then you may retain some MyKey functions.
Page 70: Troubleshooting, Mykey
MyKey MYKEY TROUBLESHOOTING Condition Potential causes • The key or fob used to start the vehicle I cannot create a MyKey. does not have admin privileges. • The key or fob used to start the vehicle is the only admin key (there always has to be at least one admin key).
Page 71 MyKey Condition Potential causes • Purchase a new key from your authorized I lost the only admin key. dealer. • Program a spare key. See SecuriLock in the I lost a key. Security chapter. • The vehicle has a remote start system that I accidentally programmed all keys is recognized as an admin key.
Page 72: Locks
Locks LOCKING AND UNLOCKING You can use the power door lock control or the remote control to lock and unlock your vehicle. Power Door Locks The power door lock control is located on the driver and front passenger door panels. A.
Page 73 Locks Note: If any door or the luggage compartment is open, or if the hood is open on vehicles with an anti-theft alarm or remote start, the horn sounds twice and the lamps will not flash. Power Liftgate (If Equipped) WARNING: Make sure all persons are clear of the liftgate area before using power liftgate control.
Page 74 Locks At the Liftgate Press the exterior liftgate release button on the top of the liftgate pull-cup handle. Smart Unlocks for Integrated Keyhead Transmitter This feature helps to prevent you from locking yourself out of your vehicle if your key is still in the ignition. When you open one of the front doors and lock your vehicle with the power door lock control, all the doors will lock then unlock if your key is still in the ignition.
Page 75 Locks Autolock Feature (If Enabled) The autolock feature will lock all the doors when: • all the doors are closed, • the ignition is on, • you shift into any gear putting your vehicle in motion, and • your vehicle reaches a speed greater than 12 mph (20 km/h). The autolock feature repeats when: •...
Page 76 Locks • you lock your vehicle using the keyless entry keypad • after 25 seconds of illumination. The lights will not turn off if: • you turn them on with the dimmer control • any door is open. Illuminated Exit The interior lamps and select exterior lamps illuminate when all doors are closed and you switch the ignition off and remove the key from the ignition (integrated keyhead transmitter only).
Page 77 Locks Manual Liftgate WARNING: Make sure to close and latch the liftgate to prevent drawing exhaust fumes into your vehicle. This will also prevent passengers and cargo from falling out. If you must drive with the liftgate open, keep the vents or windows open so outside air comes into your vehicle.
Page 78 Locks Note: Cycling the ignition while the liftgate is power closing and is near the latch may cause the liftgate to reverse to full open position. Make sure you close the liftgate before operating or moving the vehicle, especially in an enclosure, like a garage or a parking structure. You could damage the liftgate or its components.
Page 79 Locks To open with the outside liftgate control button: 1. Unlock the liftgate with the remote control or power door unlock button. If an intelligent access transmitter is within 3 feet (1 meter) of the liftgate, the liftgate will unlock when you press the liftgate release button.
Page 80: Securicode™ Keyless Entry Keypad
Locks To reset the power liftgate: 1. Disconnect the battery for 20 seconds then, reconnect the battery. 2. Manually close and fully latch the liftgate. 3. Power open the liftgate by using the remote control or the instrument panel button. SECURICODE™...
Page 81 Locks Tips: • Do not set a code that uses five of the same number. • Do not use five numbers in sequential order. • The factory-set code will work even if you have set your own personal code. Erasing a Personal Code 1.
Page 82: Security
Security SECURILOCK® PASSIVE ANTI-THEFT SYSTEM Note: The system is not compatible with non-Ford aftermarket remote start systems. Use of these systems may result in vehicle starting problems and a loss of security protection. Note: Metallic objects, electronic devices or a second coded key on the same key chain may cause vehicle starting issues if they are too close to the key when starting your vehicle.
Page 83 Security Store an extra programmed key away from the vehicle in a safe place to help prevent any inconveniences. See an authorized dealer to purchase additional spare or replacement keys. Programming a Spare Integrated Keyhead Transmitter Note: A maximum of eight coded keys can be programmed to your vehicle.
Page 84 Security Wait 20 seconds and repeat Steps 1 through 8 if the key was not successfully programmed. Take your vehicle to your authorized dealer to have the new key programmed if you are still unsuccessful. Wait 20 seconds and then repeat this procedure from Step 1 to program an additional key.
Page 85: Anti-Theft Alarm
Security 5. Press and release the brake pedal one time. The indicator on the START/STOP button should begin to rapidly flash, indicating the programming mode has been entered and two programmed intelligent access keys have been detected in the vehicle. 6.
Page 86 Security Disarming the Alarm To disarm the alarm, do any of the following: • Press the power door unlock button within the 20-second pre-armed mode. • Press the unlock button on the remote control. • Unlock the doors with the keyless entry pad. •...
Page 87: Steering Wheel
Steering Wheel ADJUSTING THE STEERING WHEEL WARNING: Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. See Sitting in the Correct Position in the Seats chapter. 1. Unlock the steering column. 2.
Page 88 Steering Wheel VOICE CONTROL (IF EQUIPPED) A. Phone mode B. Voice recognition See the SYNC or MyFord Touch chapter. CRUISE CONTROL Type 1 Type 2 CNCL See the Cruise Control chapter for information on this feature. 2013 Edge (edg) Owners Guide gf, 4th Printing, November 2012 USA (fus)
Page 89 Steering Wheel INFORMATION DISPLAY CONTROL See the Information Displays chapter for more information. Cluster Display Control Features If equipped with: MyFord system: This control functions the same as the center control on the faceplate. See MyFord system in the Audio Systems chapter.
Page 90: Wipers And Washers
Wipers and Washers WINDSHIELD WIPERS Note: Fully defrost the windshield in icy conditions before turning on the windshield wipers. Note: Make sure the windshield wipers are switched off before entering a car wash. Note: Clean the windshield and wiper blades if they begin to leave streaks or smears.
Page 91: Windshield Washers
Wipers and Washers Keep the outside of the windshield clean, especially the area around the interior mirror where the sensor is located, or sensor performance may be affected. WINDSHIELD WASHERS Note: Do not operate the wipers on a dry windshield. This may scratch the glass, damage the wiper blades or cause the wiper motor to burn out.
Page 92: Lighting
Lighting LIGHTING CONTROL A. Off B. Parking lamps, instrument panel lamps, license plate lamps and tail lamps C. Headlamps High Beams Push the lever forward to switch the high beams on. Push the lever forward again or pull the lever toward you to switch the high beams off.
Page 93: Autolamps
Lighting AUTOLAMPS Autolamp control (if equipped) The autolamp system provides light sensitive automatic on-off control of the exterior lights normally controlled by the headlamp control. • To turn autolamps on, rotate the control to • To turn autolamps off, rotate the control from the autolamp position.
Page 94: Daytime Running Lamps
Lighting 4. Turn the ignition on. 5. Turn the ignition off. 6. Turn the lighting control to the autolamp position. The headlamps and parking lamps will turn on. 7. Turn the lighting control to the off position when the desired delay time has been reached.
Page 95: Direction Indicators
Lighting DIRECTION INDICATORS The turn signal lever does not mechanically lock in the upward or downward position when activated. The turn signal control activation and cancellation is electronic. • Push down to activate the left turn signal. • Push up to activate the right turn signal.
Page 96 Lighting Map/dome lamp (if equipped) The dome lamp lights when: • any door is opened. • the dome lamp button on the instrument panel is activated. • any of the remote entry controls are pressed and the ignition is off. The map lamps are activated by pressing the controls on either side of the lens.
Page 97: Windows And Mirrors
Windows and Mirrors POWER WINDOWS WARNING: Do not leave children unattended in your vehicle and do not let children play with the power windows. They may seriously injure themselves. WARNING: When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in the proximity of the window openings.
Page 98: Exterior Mirrors
Windows and Mirrors Pull up the window switch and hold within two seconds of the window reaching the bounce-back position. The window will travel up with no bounce-back protection. The window will stop if you release the switch before the window is fully closed. Accessory Delay You can use the window switches for several minutes after you switch the ignition off, or until you open either front door.
Page 99 Windows and Mirrors Foldaway Exterior Mirrors Push the mirror toward the door window glass. Make sure that you fully engage the mirror in its support when returning it to its original position. Memory Mirrors (If Equipped) You can save and recall the mirror positions through the memory function.
Page 100: Interior Mirrors
Windows and Mirrors The image of the approaching vehicle is small and near the inboard edge of the main mirror when it is at a distance. The image becomes larger and begins to move outboard across the main mirror as the vehicle approaches (A).
Page 101: Sun Visors
Windows and Mirrors The mirror will dim automatically to reduce glare when bright lights are detected from behind your vehicle. It will automatically return to normal reflection when you select reverse gear to make sure you have a clear view when backing up. SUN VISORS Slide-On-Rod Rotate the visor toward the side...
Page 102: Moonroof
Windows and Mirrors Note: Do not attempt to move the sunshades manually or sunshade damage or malfunction may occur. The sunshade track clips are designed to release the sunshade crossbar in order to prevent damage to the system. If this occurs the sunshade crossbar ends may just need to be slid back into position to regain proper function.
Page 103: Moonroof
Windows and Mirrors Closing the Moonroof and Sunshades Note: The sunshades will only close after the moonroof is completely closed. Pull and release the control. The moonroof will stop short of the fully closed position. Pull the control again and hold to fully close the moonroof.
Page 104: Instrument Cluster
Instrument Cluster GAUGES Type 1 Cluster shown in standard measure – metric clusters similar. A. Tachometer B. Information display. See Information displays for more information. C. Speedometer D. Fuel gauge Fuel Gauge Indicates approximately how much fuel is left in the fuel tank (when the ignition is on).
Page 105: Warning Lamps And Indicators
Instrument Cluster Type 2 Cluster shown in standard measure – metric clusters similar. A. Left information display. See Information displays for more information. B. Speedometer C. Right information display. See MyFord Touch® for more information. WARNING LAMPS AND INDICATORS These lights can alert you to a vehicle condition that may become serious enough to cause expensive repairs.
Page 106 Instrument Cluster Adaptive cruise control (if equipped) (RTT) The speed control system indicator light changes color to indicate what mode the system is in: • On (gray light): Illuminates when the adaptive cruise control system is turned on. Turns off when the speed control system is turned off. •...
Page 107 Instrument Cluster WARNING: Driving a vehicle with the brake system warning light on is dangerous. A significant decrease in braking performance may occur. It will take you longer to stop the vehicle. Have the vehicle checked by your authorized dealer as soon as possible. Driving extended distances with the parking brake engaged can cause brake failure and the risk of personal injury.
Page 108 Instrument Cluster Grade assist (if equipped) (RTT) Illuminates when grade assist is turned on. Heads up display (if equipped) A red beam of lights will illuminate on the windshield in certain instances when using adaptive cruise control and/or the collision warning system. It will also illuminate momentarily when you start your vehicle to make sure the display works.
Page 109 Instrument Cluster Safety belt Reminds you to fasten your safety belt. A Belt-Minder® chime will also sound to remind you to fasten your safety belt. Service engine soon The service engine soon indicator light illuminates when the ignition is first turned to the on position to check the bulb and to indicate whether the vehicle is ready for Inspection/Maintenance (I/M) testing.
Page 110: Audible Warnings And Indicators
Instrument Cluster Stability Control System Displays when the AdvanceTrac®/Traction control is active. If the light remains on, have the system serviced immediately. Stability Control System Off Illuminates when AdvanceTrac®/Traction control has been disabled by the driver. AUDIBLE WARNINGS AND INDICATORS Key In Ignition Warning Chime Sounds when the key is left in the ignition in the off or accessory position and the driver’s door is opened.
Page 111: Information Displays
Information Displays GENERAL INFORMATION WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle.
Page 112 Information Displays †Trip 1 / 2 Trip Odometer Trip Timer Distance to E Inst Fuel Econ Average Fuel Fuel Used Compass (located in lower line of display). Note: this will also display in other menus. Total Odometer (located in lower line of display). Note: this will also display in other menus.
Page 113 Information Displays Settings Driver Assist Traction Control Blind Spot Collision Warning Sensitivity High, Normal or Chimes (not selectable if using a MyKey) Warning (not selectable if using a MyKey) Cross Traffic Rear Park Aid Trailer Sway Display Language English, Español or Français Units Distance Miles and...
Page 114 Information Displays Settings Convenience Autolamp Delay Off or number of seconds Compass (non Display MyFord Touch Calibrate (if Hold OK to units only) equipped) Calibrate Zone (1–15) DTE Calculation Normal or Towing Easy Entry/Exit Locks Autolock Autounlock Remote Unlock All Doors or Driver First Oil life Reset Set XXX%...
Page 115: Trip Computer
Information Displays Settings MyKey Create MyKey Hold OK to Create MyKey 911 Assist Always On / User Selectable Traction Control Always On or User Selectable Max Speed 80 MPH (130 km/h) or Off Speed Warning 45 mph (75 km/h), 55 mph (90 km/h), 65 mph (105 km/h) or Volume Limiter Clear MyKeys...
Page 116 Information Displays Total Odometer Registers the total mileage of the vehicle. Compass (non MyFord/MyLincoln Touch units only) Displays the vehicle’s heading direction. To calibrate the compass: Enter the compass menu and select Calibrate. Follow the prompts. To set the compass zone: Enter the compass menu and select Set. Follow the prompts.
Page 117 Information Displays Main menu From the main menu bar on the left side of the information display, you can choose from the following categories: Display Mode Trip 1 & 2 Fuel Economy Settings Information Scroll up/down to highlight one of the categories, then press the right arrow key or OK to enter into that category.
Page 118 Information Displays Display mode †Option 1 Option 2 Option 3 †Option 4 Regardless of display mode chosen, when SelectShift Automatic™ transmission (SST) is activated, the cluster will change to the round tachometer if not already selected. After the round tachometer displays, other display modes with the bar tachometer can also be chosen.
Page 119 Information Displays Trip 1 & 2 Choose between the standard or enhanced trip display. See the Settings chart following to reach the trip display settings. Enhanced Trip 1 & 2 Standard display display Trip distance Elapsed trip time Average fuel economy Estimated amount of fuel consumed Total odometer (lower left corner) Press OK to pause the Trip 1 or 2 screen.
Page 120 Information Displays Fuel Economy Use the left/right arrow buttons to choose the desired fuel economy display. Inst. Fuel XX. Min Fuel Fuel Economy Economy History Instantaneous fuel usage †Fuel usage over a 5, 10, or 30 minute time span Total odometer (lower left corner) Press and hold OK to reset the currently displayed fuel usage information.
Page 121 Information Displays Vehicle Autolamp Delay Off or number of seconds Easy Entry/Exit On / Off Fuel DTE Calculation Normal, Towing Locks Autolock, On / Off Autounlock On / Off Remote Unlocking All doors / Driver’s door Standard / Memory On (See Menu control later in Menu Control this section) Oil Life Reset...
Page 122 Information Displays Display Gauge Display Fuel Gauge / Fuel + Tach Trip Display Standard / Enhanced Language English / Español / Français Units Distance Miles & Gal / Km & Liters Temperature Fahrenheit (°F) / Celsius (°C) Restore Defaults Hold OK to Restore Settings to Factory Defaults Information In this mode, you can view different vehicle system information and perform a system check.
Page 123: Information Messages
Information Displays Menu control To change the menu control between Standard or Memory On, refer to Vehicle > Menu Control found in the table under Settings in this chapter. • Standard: when in the Display, Trip or Fuel Economy sub-categories, scrolling up and down will always exit back to the main categories.
Page 124 Information Displays AdvanceTrac® / Action / Description Traction Control Messages Service AdvanceTrac Displayed when the AdvanceTrac® system has detected a condition that requires service. Contact your authorized dealer as soon as possible. Traction control off Displayed when the traction control has been disabled by the driver.
Page 125 Information Displays AWD Messages Action / Description AWD Off Displayed when the AWD system has been automatically disabled to protect itself. This is caused by operating the vehicle with the compact spare tire installed or if the system is overheating. The AWD system will resume normal function and clear this message after driving a short distance with the road tire re-installed or after the system is allowed to...
Page 126 Information Displays Battery and Action / Description Charging System Messages Transport Mode Contact your authorized dealer as soon as Contact Dealer possible. Factory Mode Contact Contact your authorized dealer as soon as Dealer possible. BLIS® Messages Action / Description Blind Spot Not Displayed when the blind spot information Available Sensor system/cross traffic alert system sensors are...
Page 127 Information Displays Brake System Action / Description Messages Park Brake Engaged Displayed when the parking brake is set, the engine is running and the vehicle is driven more than 3 mph (5 km/h). If the warning stays on after the parking brake is released, contact your authorized dealer as soon as possible.
Page 128 Information Displays Fuel Messages Action / Description Check Fuel Fill Inlet Displayed when the fuel fill inlet may not be properly closed. Fuel Level Low XXX Displayed as an early reminder of a low fuel mi/km to E condition. Keys and Intelligent Action / Description Access Messages No Key Detected...
Page 129 Information Displays Keys and Intelligent Action / Description Access Messages Starting System Fault This message is displayed when there is a problem with your vehicle’s starting system. See your authorized dealer for service. Maintenance Action / Description Messages LOW Engine Oil Stop the vehicle as soon as safely possible, Pressure turn off the engine.
Page 130 Information Displays MyKey® Messages Action / Description MyKey active Drive Displayed when MyKey® is active. Safely MyKey not Created Displayed during key programming when MyKey® cannot be programmed. Speed Limited to xx Displayed when starting the vehicle and MPH/km/h MyKey® is in use and the MyKey speed limit is on.
Page 131 Information Displays Passenger Sensing Action / Description System Message Remove Objects Near Displayed when objects are by the passenger Passenger Seat seat. After the objects are moved away from the seat, if the warning stays on or continues to come on contact your authorized dealer as soon as possible.
Page 132: Audio System
Due to technical incompatibility, certain recordable and re-recordable compact discs may not function correctly when used in Ford CD players. Note: Do not insert CDs with homemade paper (adhesive) labels into the CD player as the label may peel and cause the CD to become jammed.
Page 133 Audio System MP3 Track and Folder Structure Audio systems capable of recognizing and playing MP3 individual tracks and folder structures work as follows: • There are two different modes for MP3 disc playback: MP3 track mode (system default) and MP3 folder mode. •...
Page 134: Myford® System
Audio System MyFord® SYSTEM WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle.
Page 135 Audio System C. Memory presets: • In radio mode, store your favorite radio stations. To store a radio station, tune to the station, then press and hold a preset button until sound returns. • In CD mode, press one of these buttons to select a track. D.
Page 136 Audio System M. PHONE: Press this button to access the phone features of the SYNC system. See the SYNC chapter for more information. N. AUX: Press this button to access your auxiliary input jack or switch between devices you plug into the input jack or USB port. See Auxiliary input jack later in this chapter.
Page 137 Audio System SIRIUS Channel Guide Select to view available satellite radio channels. Press OK to open a list of the following options for this channel: Tune Channel, Skip Channel or Lock Channel. Once you skip or lock a channel, you can only access it by pressing Direct and entering the channel number.
Page 138 Audio System CD Settings Scan All Select to scan all disc selections. Select to scan all music in the current MP3 Scan Folder folder. Select to bring soft and loud passages together CD Compression for a more consistent listening level. Clock Settings Set Time Select to set the time.
Page 139 Audio System WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle.
Page 140 Audio System AM/FM/CD SONY® AUDIO SYSTEM (IF EQUIPPED) WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road.
Page 141: Auxiliary Input Jack
Audio System C. SOUND: Press this button to access settings for Treble, Middle, Bass, Balance and Fade. D. TUNE + and TUNE - : • In radio mode, press these buttons to manually search through the radio frequency band. • In Sirius mode, press these buttons to find the next or previous available satellite radio station.
Page 142: Usb Port
Audio System The auxiliary input jack allows you to connect and play music from your portable music player through your vehicle speakers. You can use any portable music player designed for use with headphones. Your audio extension cable must have male ⁄...
Page 143: Satellite Radio Information
Audio System MEDIA HUB (IF EQUIPPED) The media hub is located in the center console and has the following features: A. A/V inputs B. SD card slot C. USB ports For more information, see the MyFord Touch chapter. SATELLITE RADIO INFORMATION (IF EQUIPPED) Satellite Radio Channels Sirius broadcasts a variety of music, news, sports, weather, traffic and entertainment satellite radio channels.
Page 144 Note: Sirius reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particular channels, and its prices, at any time, with or without notice to you. Ford Motor Company shall not be responsible for any such programming changes.
Page 145 Audio System Satellite Radio Electronic Serial Number (ESN) You need your ESN to activate, modify or track your satellite radio account. When in satellite radio mode, you can view this number by pressing SIRIUS and memory preset 1 at the same time. To access your ESN, press the bottom left corner of the touchscreen, then SIRIUS >...
Page 146 Audio System Radio display Condition Possible action Call SIRIUS Your satellite service is Call Sirius at 1–888–539–7474 no longer available. 1–888–539–7474 to resolve subscription issues. None Found. Check All the channels in the Use the channel guide Channel Guide. selected category are to turn off the Lock or either skipped or Skip function on that...
Page 147: Climate Control
Climate Control MANUAL HEATING AND AIR CONDITIONING SYSTEM A. Fan speed control: Controls the volume of air circulated in your vehicle. Turn to select the desired fan speed or switch off. If you switch the fan off, the windshield may fog up. B.
Page 148: Dual Automatic Temperature Control
Climate Control H. Air distribution control: Press to set the air distribution to a position listed below: Distributes air through the windshield defroster vents, demister vents and floor vents. Distributes air through the instrument panel vents. Distributes air through the instrument panel vents, floor vents, and demister vents.
Page 149 Climate Control A. Power/Driver temperature control: Press to turn the climate control system off and on. When the system is off, outside air cannot enter the vehicle. Turn to increase or decrease the air temperature for the driver side of the vehicle.
Page 150 Climate Control E. Recirculated air: Press to switch between outside air and recirculated air. When the LED on the button is lit, the air currently in the passenger compartment is being recirculated. Using recirculated air can reduce the time needed to cool the interior and reduce unwanted odors from entering your vehicle.
Page 151 Climate Control DUAL AUTOMATIC TEMPERATURE CONTROL SYSTEM (WITH SONY® AUDIO SYSTEM) Note: You can switch temperature units between Fahrenheit and Celsius. See Menu features in the MyFord Touch or MyLincoln Touch chapter. A. CLIMATE: Press to turn the climate control system off and on. When the system is off, outside air cannot enter the vehicle.
Page 152 Climate Control Use air conditioning with recirculated air to improve cooling performance and efficiency. Note: Air conditioning turns on automatically in MAX A/C, Defrost and Floor/Defrost. F. MAX A/C: Distributes recirculated air through the instrument panel vents to cool the vehicle. This position is more economical and efficient than normal air conditioning.
Page 153 Climate Control DUAL AUTOMATIC TEMPERATURE CONTROL SYSTEM (WITH MyTemp) DUAL TEMP AUTO Note: You can switch temperature units between Fahrenheit and Celsius. See Settings in the MyFord Touch or MyLincoln Touch chapter. A. MyTemp: Allows you to quickly adjust to a frequently used setting with a single touch.
Page 154 Climate Control F. A/C: Press to turn air conditioning off and on. Air conditioning cools the vehicle using outside air. To improve air conditioning when starting your vehicle, drive with the windows slightly open for two to three minutes. Use air conditioning with recirculated air to improve cooling performance and efficiency.
Page 155 Climate Control During extreme high ambient temperatures when idling stationary for extended periods in gear, run the air conditioning in the MAX A/C mode, adjust the blower fan speed to the lowest setting and put the vehicle’s transmission into position P (automatic transmission) to continue to receive cool air from your air conditioning system.
Page 156: Rear Window Defroster
Climate Control For maximum cooling performance in AUTO mode, press MAX A/C. For maximum cooling performance in manual override control: 1. Choose the Panel, A/C, and recirculated air controls. 2. Set the temperature to LO. 3. Set the fan to the highest blower setting. To aid in side window defogging and demisting in cold or humid weather: 1.
Page 157: Cabin Air Filter
Climate Control CABIN AIR FILTER Note: Make sure you have a cabin air filter installed at all times. This prevents foreign objects from entering the system. Running the system without a filter in place could result in degradation or damage to the system.
Page 158 Climate Control Manual Climate Systems In hot weather, the climate control system is set to MAX A/C. In moderate weather, the system either heats or cools (based on previous settings). The rear defroster and heated mirrors are not automatically turned on. In cold weather, maximum heat is provided in floor/defrost mode.
Page 159: Seats
Seats SITTING IN THE CORRECT POSITION WARNING: Sitting improperly out of position or with the seat back reclined too far can take off weight from the seat cushion and affect the decision of the passenger sensing system, resulting in serious injury or death in a crash. Always sit upright against your seat back, with your feet on the floor.
Page 160: Head Restraints
Seats • Position the shoulder strap of the safety belt over the center of your shoulder and position the lap strap tightly across your hips. Make sure that your driving position is comfortable and that you can maintain full control of your vehicle. HEAD RESTRAINTS WARNING: To minimize the risk of neck injury in the event of a crash, the driver and passenger occupants should not sit in or...
Page 161 Seats B. two steel stems C. guide sleeve unlock and remove button D. guide sleeve adjust and release button • Raise: Pull up on the head restraint (A). • Lower: Press and hold the guide sleeve adjust and release button (D) and push down on the head restraint (A).
Page 162: Front Manual Seats
Seats Tilting Head Restraints (If Equipped) The front head restraints may have a tilting feature for extra comfort. To tilt the head restraint, do the following: 1. Adjust the seatback to an upright driving or riding position. 2. Tilt the head restraint forward by gently pulling the top of the head restraint.
Page 163 Seats Adjusting the Height of the Driver Seat WARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips. Recline Adjustment WARNING: Cover sharp edges on the load to help prevent injury to occupants.
Page 164: Power Seats
Seats Folding the Front Passenger Seatback The front passenger seatback can be folded to a horizontal position to make room for a long load. Lumbar Adjustment POWER SEATS (IF EQUIPPED) WARNING: Never adjust the driver’s seat or seatback when the vehicle is moving.
Page 165 Seats Power Seat Adjustments Power Lumbar 2013 Edge (edg) Owners Guide gf, 4th Printing, November 2012 USA (fus)
Page 166: Memory Function
Seats MEMORY FUNCTION (IF EQUIPPED) The memory control, located on the instrument panel, allows automatic positioning of the driver seat and power mirrors to two programmable positions. Programming a Memory Position Note: You can program a memory position at any time. •...
Page 167: Heated Seats
Seats • the key is removed from the ignition or the push button start system (if equipped) is switched off. The seat will move to the original position when: • the transmission is in position N or P • the key is placed in the ignition or when the push button start system (if equipped) is put in accessory mode or started.
Page 168: Rear Seats
Seats REAR SEATS WARNING: To prevent possible damage to the seat or safety belts, make sure that the safety belts are not buckled when folding the seatback. • Reclining the seatback: With the seat occupied, pull the lever up to recline the seatback.
Page 169 Seats REAR SEAT ARMREST Press the latch and pull the armrest forward for armrest or cupholder use. Lift up one of the slotted areas on the cover to access the cup holders. To close the armrest, close the cupholder cover and rotate the armrest rearward until the latch clicks.
Page 170: Universal Garage Door Opener (If Equipped) 169
Universal Garage Door Opener (If Equipped) 169 HOMELINK® WIRELESS CONTROL SYSTEM (IF EQUIPPED) WARNING: Make sure that the garage door and security device are free from obstruction when you are programming. Do not program the system with the vehicle in the garage. WARNING: Do not use the system with any garage door opener that does not have the safety stop and reverse feature as required by U.S.
Page 171 170 Universal Garage Door Opener (If Equipped) 1. With your vehicle parked outside of the garage and your key in the ignition, turn the key so that the ignition is in the on position. 2. Hold your hand-held, garage door transmitter 1–3 inches (2–8 centimeters) away from the HomeLink button you want to program.
Page 172 Universal Garage Door Opener (If Equipped) 171 6. Return to your car. 7. Press and hold the function button you want to program for two seconds, then release. Repeat this step. Depending on your brand of garage door opener, you may need to repeat this sequence a third time.
Page 173 172 Universal Garage Door Opener (If Equipped) Programing the transmitters To program HomeLink to the transmitter you must first put the transmitter into programming mode. To do this: A. Red LED B. Green LED 1. Press and hold one of the buttons on the hand-held transmitter for 10 seconds.
Page 174 Universal Garage Door Opener (If Equipped) 173 Programming HomeLink to the Genie Intellicode garage door opener motor Note: You may need a ladder to access the garage door opener motor. To program HomeLink to the garage door opener motor: 1. Press and hold the PROGRAM button on the garage door opener motor until both blue LED’s turn on.
Page 175: Auxiliary Power Points
Auxiliary Power Points AUXILIARY POWER POINTS Note: Do not insert objects other than an accessory plug into the power point. This will damage the outlet and blow the fuse. Note: Do not hang any type of accessory or accessory bracket from the plug.
Page 176: Storage Compartments
Storage Compartments CENTER CONSOLE Stow items in the cupholder carefully as items may become loose during hard braking, acceleration or collisions, including hot drinks which may spill. Available console features include: A. Cupholders B. Cover: Two pen holders, travel tissue pack holder, and business card or paper holder.
Page 177: Starting And Stopping The Engine
Starting and Stopping the Engine GENERAL INFORMATION WARNING: Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage. WARNING: Do not park, idle, or drive your vehicle on dry grass or other dry ground cover.
Page 178 Starting and Stopping the Engine A. Off: The ignition is off. B. Accessory: Allows the electrical accessories, such as the radio, to operate while the engine is not running. C. On: All electrical circuits are operational and the warning lamps and indicators illuminate.
Page 179 Starting and Stopping the Engine Off: Turns the ignition off. • Without applying the brake pedal, press and release the button once when the ignition is in the on mode, or when the engine is running but the vehicle is not in motion. Accessory: Allows some electrical accessories to operate while the engine is not running.
Page 180 Starting and Stopping the Engine Vehicles with Keyless Start Note: Do not touch the accelerator pedal. 1. Fully press the brake pedal. 2. Press the button. The system does not function if: • The key frequencies are jammed. • The key battery has no charge. If you are unable to start your vehicle, do the following: 1.
Page 181 Starting and Stopping the Engine Stopping the Engine When Your Vehicle Is Stationary 1. Move the transmission selector lever to position P. 2. If your vehicle has an ignition key, turn the key to the off position. If your vehicle has a keyless start system, press the button once. 3.
Page 182: Engine Block Heater
Starting and Stopping the Engine Important Ventilating Information If you stop your vehicle and leave the engine idling for long periods, we recommend that you do one of the following: • Open the windows at least 1 inch (2.5 centimeters). •...
Page 183 Starting and Stopping the Engine • Make sure the system is unplugged and properly stowed before driving your vehicle. Make sure the protective cover seals the prongs of the block heater cord plug when not in use. • Keep plug terminals clean and free of dirt and corrosion. •...
Page 184: Fuel And Refueling
Fuel and Refueling SAFETY PRECAUTIONS WARNING: Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler inlet, do not refuel until the sound stops.
Page 185: Fuel Quality
Fuel and Refueling • Avoid getting fuel liquid in your eyes. If fuel is splashed in the eyes, remove contact lenses (if worn), flush with water for 15 minutes and seek medical attention. Failure to seek proper medical attention could lead to permanent injury.
Page 186: Running Out Of Fuel
Fuel and Refueling octane levels below 87 are not recommended. Premium fuel will provide improved performance and is recommended for severe duty usage such as trailer tow. Do not be concerned if your engine sometimes knocks lightly. However, if it knocks heavily while you are using fuel with the recommended (R+M)/2 METHOD octane rating, see your authorized...
Page 187: Refueling
Fuel and Refueling When filling the vehicle’s fuel tank from a portable fuel container, use the funnel included with the vehicle. 1. Locate the white plastic funnel in the spare tire compartment. 2. Slowly insert the funnel into the capless fuel system.
Page 188 Fuel and Refueling Easy Fuel® “No Cap” Fuel System WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler door, do not refuel until the sound stops. Otherwise, fuel may spray out, which could cause serious personal injury.
Page 189: Fuel Consumption
Fuel and Refueling FUEL CONSUMPTION Filling the Tank The advertised capacity is the indicated capacity and the empty reserve combined. Indicated capacity is the difference in the amount of fuel in a full tank and a tank when the fuel gauge indicates empty. Empty reserve is the amount of fuel in the tank after the fuel gauge indicates empty.
Page 190 Information are essential to the life and performance of your vehicle and to its emissions system. If other than Ford, Motorcraft® or Ford-authorized parts are used for maintenance replacements or for service of components affecting emission control, such non-Ford parts should be equivalent to genuine Ford Motor Company parts in performance and durability.
Page 191 Fuel and Refueling Do not make any unauthorized changes to your vehicle or engine. By law, vehicle owners and anyone who manufactures, repairs, services, sells, leases, trades vehicles, or supervises a fleet of vehicles are not permitted to intentionally remove an emission control device or prevent it from working.
Page 192 Fuel and Refueling Readiness for Inspection/Maintenance (I/M) Testing Some state, provincial and local governments may have Inspection/Maintenance (I/M) programs to inspect the emission control equipment on your vehicle. Failure to pass this inspection could prevent you from getting a vehicle registration. If the service engine soon indicator is on or the bulb does not work, the vehicle may need to be serviced.
Page 193: Transmission
Transmission AUTOMATIC TRANSMISSION WARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). Turn the ignition to the off position and remove the key whenever you leave your vehicle. Your vehicle has been designed to improve fuel economy by reducing fuel usage while coasting or decelerating.
Page 194 Transmission D (Drive) with Grade Assist Press the transmission control switch on the side of the gearshift lever to activate grade assist and cancel overdrive. Grade assist: • Provides additional grade (engine) braking and extends lower gear operation on uphill climbs for hilly terrain or mountainous areas.
Page 195 Transmission S (Sport) (if equipped) Moving the gearshift lever to S (Sport mode): • Provides additional grade (engine) braking and extends lower gear operation to enhance performance for uphill climbs, hilly terrain or mountainous areas. This will increase engine RPM during engine braking.
Page 196 Transmission If your vehicle is equipped with paddles on the steering wheel: • Pull the left paddle (–) to downshift the transmission. • Pull the right paddle (+) to upshift the transmission. Upshift to the recommended shift speeds according to the following chart: Upshifts when accelerating (recommended for best fuel economy)
Page 197 Transmission Brake-shift interlock WARNING: Do not drive your vehicle until you verify that the brake lamps are working. WARNING: When doing this procedure, you will be taking the vehicle out of park which means the vehicle can roll freely. To avoid unwanted vehicle movement, always fully set the parking brake prior to doing this procedure.
Page 198: Hill Start Assist
Transmission 3. Apply the brake pedal. Gently push and hold the brake shift interlock lever while pulling the gearshift lever out of the P (Park) position and into the N (Neutral) position. 4. Install the trim panel. 5. Apply the brake pedal, start the vehicle, and release the parking brake.
Page 199 Transmission This feature makes it easier to pull away when the vehicle is on a slope without the need to use the parking brake. When this feature is active, the vehicle will remain stationary on the slope for two to three seconds after you release the brake pedal.
Page 200: All-Wheel Drive (If Equipped)
All-Wheel Drive (If Equipped) USING YOUR ALL-WHEEL DRIVE (AWD) SYSTEM (IF EQUIPPED) AWD uses all four wheels to power the vehicle. This increases traction, enabling you to drive over terrain and road conditions that a conventional two-wheel drive vehicles cannot. The AWD system is active all the time and requires no input from the operator.
Page 201 All-Wheel Drive (If Equipped) When driving at slow speeds in deep sand under high outside temperatures, use a low gear when possible. Lower gear operation will maximize the engine and transmission cooling capability. Under severe operating conditions, the A/C may cycle on and off to protect overheating of the engine.
Page 202 All-Wheel Drive (If Equipped) Note: Do not rock the vehicle if the engine is not at normal operating temperature or damage to the transmission may occur. Note: Do not rock the vehicle for more than a few minutes or damage to the transmission and tires may occur or the engine may overheat.
Page 203 Ford Motor Company joins the U.S. Forest Service and the Bureau of Land Management in encouraging you to help preserve our national forest and other public and private lands by “treading lightly.”...
Page 204 All-Wheel Drive (If Equipped) Driving on Hilly or Sloping Terrain Note: Avoid driving crosswise or turning on steep slopes or hills. A danger lies in losing traction, slipping sideways and possibly rolling over. Whenever driving on a hill, determine beforehand the route you will use. Do not drive over the crest of a hill without seeing what conditions are on the other side.
Page 205 All-Wheel Drive (If Equipped) Driving on Snow and Ice WARNING: If you are driving in slippery conditions that require tire chains or cables, then it is critical that you drive cautiously. Keep speeds down, allow for longer stopping distances and avoid aggressive steering to reduce the chances of a loss of vehicle control which can lead to serious injury or death.
Page 206 Any modifications to a vehicle that raise the center of gravity can make it more likely the vehicle will rollover as a result of a loss of control. Ford Motor Company recommends that caution be used with any vehicle equipped with a high load or device (such as ladder or luggage racks).
Page 207: Brakes
Brakes GENERAL INFORMATION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may be worn out. Have them inspected by an authorized dealer. If your vehicle has continuous vibration or shudder in the steering wheel while braking, have your vehicle inspected by an authorized dealer.
Page 208: Hints On Driving With Anti-Lock Brakes
Brakes If the anti-lock brake system is disabled, normal braking is still effective. If the brake warning lamp illuminates with the parking brake released, have your brake system serviced immediately. HINTS ON DRIVING WITH ANTI-LOCK BRAKES When the system is operating, the brake pedal will pulse and may travel further.
Page 209: Traction Control
Traction Control PRINCIPLES OF OPERATION The traction control system helps avoid drive wheel spin and loss of traction. If your vehicle begins to slide, the system applies the brakes to individual wheels and, when needed, reduces engine power at the same time. If the wheels spin when accelerating on slippery or loose surfaces, the system reduces engine power in order to increase traction.
Page 210 Stability Control PRINCIPLES OF OPERATION WARNING: Vehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction or wheel and tire size may change the handling characteristics of the vehicle and may adversely affect the performance of the AdvanceTrac® system. In addition, installing any stereo loudspeakers may interfere with and adversely affect the AdvanceTrac®...
Page 211: Stability Control Advancetrac
Stability Control A Vehicle without AdvanceTrac® with RSC® skidding off its intended route. B Vehicle with AdvanceTrac® with RSC® maintaining control on a slippery surface. USING ADVANCETRAC® WITH RSC® The system automatically activates when you start your engine. The AdvanceTrac® with RSC® system cannot be completely turned off, but the electronic stability control and roll stability control portions of the system are disabled when the transmission is in position R.
Page 212: Parking Aids
Parking Aids SENSING SYSTEM (IF EQUIPPED) WARNING: To help avoid personal injury, please read and understand the limitations of the system as contained in this section. Sensing is only an aid for some (generally large and fixed) objects when moving in reverse on a flat surface at parking speeds. Traffic control systems, inclement weather, air brakes, and external motors and fans may also affect the function of the sensing system;...
Page 213: Rear-View Camera System
Parking Aids If a fault is present in the system, a warning message appears in the information display and does not allow the driver to switch the faulted system on. Note: If your vehicle is equipped with MyKey®, it is possible to prevent turning the sensing system off.
Page 214 Parking Aids WARNING: Objects that are close to either corner of the bumper or under the bumper, might not be seen on the screen due to the limited coverage of the camera system. WARNING: Back up as slow as possible since higher speeds might limit your reaction time to stop the vehicle.
Page 215 Parking Aids Using the Rear View Camera System The rear view camera system displays what is behind your vehicle when you place the transmission in R (Reverse). The system uses two types of guides to help you see what is behind your vehicle: 1.
Page 216 Parking Aids Guidelines and the Centerline Note: Fixed guidelines are only available when the transmission is in R (Reverse). Note: The centerline is only available if fixed guidelines are on. A. Rear bumper B. Fixed guideline: Red zone C. Fixed guideline: Yellow zone D.
Page 217 Parking Aids Manual Zoom WARNING: When manual zoom is on, the full area behind the vehicle is not shown. Be aware of your surroundings when using the manual zoom feature. Note: Manual zoom is only available when the transmission is in R (Reverse).
Page 218: Cruise Control
Cruise Control PRINCIPLES OF OPERATION Cruise control lets you maintain a set speed without keeping your foot on the accelerator pedal. USING CRUISE CONTROL WARNING: Do not use cruise control in heavy traffic, on winding roads or when the road surface is slippery. This could result in loss of vehicle control, serious injury or death.
Page 219: Using Adaptive Cruise Control
Cruise Control Changing the Set Speed Note: If you accelerate by pressing the accelerator pedal, the set speed will not change. When you release the accelerator pedal, you will return to the speed that you previously set. • Press SET up or down and hold to increase or decrease the set speed. Release the control when you reach the desired speed.
Page 220 Cruise Control WARNING: Do not use in poor visibility, specifically fog, rain, spray or snow. Note: It is your responsibility to stay alert, drive safely and be in control of your vehicle at all times. The system adjusts your speed to maintain a proper distance between you and the vehicle in front of you in the same lane.
Page 221 Cruise Control 4. Take your foot off the accelerator pedal. 5. A lead vehicle graphic will illuminate if there is a vehicle detected in front of you. Note: When adaptive cruise control is active, the set speed displayed in the information display may vary slightly from the speedometer. Following a Vehicle WARNING: When following a vehicle in front of you, your vehicle will not decelerate automatically to a stop, nor will your...
Page 222 Cruise Control If the system predicts that its maximum braking level will not be sufficient, an audible warning will sound while the system continues to brake. This is accompanied by a heads-up display; a red warning bar illuminating on the windshield. You should take immediate action. Setting the Gap Distance Note: It is your responsibility to select a gap appropriate to the driving conditions.
Page 223 Cruise Control When you are overriding the system, the green indicator light illuminates and the follow vehicle does not show in the information display. The system will resume operation when you release the accelerator pedal. The vehicle speed will decrease to the set speed, or a lower speed if following a slower vehicle.
Page 224 Cruise Control engine braking in these situations to reduce the load on the vehicle’s regular brake system to prevent them from overheating. Switching Off Adaptive Cruise Control Note: The set speed memory will erase when you switch the system off. Press and release OFF or turn off the ignition.
Page 225 Cruise Control Adaptive Cruise Control Not Available Several conditions exist which can cause the system to deactivate or prevent the system from activating when requested. These conditions include: • a blocked sensor • high brake temperature • a failure in the system or a related system. Blocked Sensor WARNING: Do not use ACC when towing a trailer with brake controls.
Page 226 Cruise Control Cause Action The surface of the radar in the Clean the grille surface in front of grille is dirty or obstructed in the radar or remove the object some way. causing the obstruction. The surface of the radar in the Wait a short time.
Page 227: Driving Aids
Driving Aids BLIND SPOT INFORMATION SYSTEM (BLIS®) WITH CROSS TRAFFIC ALERT (CTA) (IF EQUIPPED) WARNING: To help avoid injuries, NEVER use the BLIS® as a replacement for using the interior and exterior mirrors and looking over your shoulder before changing lanes. BLIS® is not a replacement for careful driving and only an assist.
Page 228 Driving Aids Using the Systems BLIS® turns on when the engine is started and the vehicle is driven forward above 3 mph (5 km/h); it remains on while the transmission is in D (Drive) and N (Neutral). If shifted out of D (Drive) or N (Neutral), the system enters CTA mode.
Page 229 Driving Aids System Lights and Messages The BLIS® and CTA systems illuminate a yellow alert indicator in the outside mirror on the side of the vehicle the approaching vehicle is coming from. Note: The alert indicator dims when the headlamp switch is not in the off position and nighttime darkness is detected.
Page 230 Driving Aids System Sensors WARNING: Just prior to the system recognizing a blocked condition and alerting the driver, the number of missed objects will increase. To help avoid injuries, NEVER use the BLIS® as a replacement for using the side and rear view mirrors and looking over your shoulder before changing lanes.
Page 231 Driving Aids Reasons for messages being displayed The radar surface is Clean the fascia area in front of the radar or dirty or obstructed remove the obstruction. The radar surface is Drive normally in traffic for a few minutes to not dirty or obstructed allow the radar to detect passing vehicles so it can clear the blocked state.
Page 232: Collision Warning System
Driving Aids System Errors If either system senses a problem with the left or right sensor, the BLIS® indicator in the information display will illuminate and remain on. Also, BLIND SPOT SYSTEM FAULT or CROSS TRAFFIC SYSTEM FAULT message will appear. When problems that may cause the left or right indicator not to illuminate, only the information display message faults appear.
Page 233 Driving Aids If it is, a red warning light illuminates and an audible warning chime sounds. The brake support system assists the driver in reducing the collision speed by charging the brakes. If the risk of collision further increases after the warning light illuminates, the brake support prepares the brake system for rapid braking.
Page 234 Driving Aids Blocked Sensors If a message regarding a blocked sensor appears in the information display, the radar signals from the sensor have been obstructed. The sensors are located behind a fascia cover near the driver side of the lower grille. When the sensors are obstructed, a vehicle ahead cannot be detected and the collision warning system does not function.
Page 235 Driving Aids System Limitations WARNING: The collision warning system’s brake support can only help reduce the speed at which a collision occurs if the driver applies the vehicle’s brakes. The brake pedal must be pressed just like any typical braking situation. Due to the nature of radar technology, there may be certain instances where vehicles do not provide a collision warning.
Page 236: Steering
Driving Aids STEERING To help prevent damage to the power steering system: • Never hold the steering wheel at its furthest turning points (until it stops) for more than three to five seconds while the engine is running. • Do not operate the vehicle with a low power steering pump fluid reservoir level (below the MIN mark on the reservoir).
Page 237: Load Carrying
Load Carrying CARGO NETS (IF EQUIPPED) WARNING: This net is not designed to restrain objects during a collision or heavy braking. The cargo net secures lightweight objects in the cargo area. Attach the net to the anchors provided in one of the two configurations. Repeat the attachment on both sides of the vehicle.
Page 238 Load Carrying Type 2 CARGO MANAGEMENT SYSTEM (IF EQUIPPED) The system is located in the floor of the cargo area. Lift the release handle to open. 2013 Edge (edg) Owners Guide gf, 4th Printing, November 2012 USA (fus)
Page 239: Roof Racks And Load Carriers
For correct roof rack system function, you must place loads directly on crossbars affixed to the roof rack side rails. We recommend you use Ford Genuine Accessory crossbars designed specifically for your vehicle. Make sure that you securely fasten the load. Check the tightness of the load before driving and at each fuel stop.
Page 240: Utility Hooks
Load Carrying UTILITY HOOK You can use the utility hook to hang small items such as grocery bags. Do not hang more than 10 pounds (4.5 kilograms) on the hook. LOAD LIMIT Vehicle Loading – With and Without a Trailer This section will guide you in the proper loading of your vehicle and/or trailer, to keep your loaded vehicle weight within its design rating capability, with or without a trailer.
Page 241 Load Carrying Vehicle Curb Weight – is the weight of your new vehicle when you picked it up from your authorized dealer plus any aftermarket equipment. Payload – is the combined weight of cargo and passengers that the vehicle is carrying. The maximum payload for your vehicle can be found on the Tire Label on the B-Pillar or the edge of the driver’s door (vehicles exported outside the US and Canada may not have a Tire Label).
Page 242 Load Carrying Example only: 2013 Edge (edg) Owners Guide gf, 4th Printing, November 2012 USA (fus)
Page 243 Load Carrying Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue load weight is also part of cargo weight. GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) –...
Page 244 Load Carrying GVWR (Gross Vehicle Weight Rating) – is the maximum allowable weight of the fully loaded vehicle (including all options, equipment, passengers and cargo). The GVWR is shown on the Safety Compliance Certification Label. The label shall be affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver’s seating position.
Page 245 Load Carrying WARNING: Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structural damage, serious damage to the vehicle, loss of control and personal injury. GCW (Gross Combined Weight) – is the weight of the loaded vehicle (GVW) plus the weight of the fully loaded trailer.
Page 246 Load Carrying WARNING: Exceeding any vehicle weight rating limitation could result in serious damage to the vehicle and/or personal injury. Steps for determining the correct load limit: 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.” on your vehicle’s placard. 2.
Page 247 Load Carrying • Suppose your vehicle has a 1400 lb. (635 kg) cargo and luggage capacity. You and one of your friends decide to pick up cement from the local home improvement store to finish that patio you have been planning for the past 2 years.
Page 248: Towing
Towing TOWING A TRAILER WARNING: Do not exceed the GVWR or the GAWR specified on the certification label. WARNING: Towing trailers beyond the maximum recommended gross trailer weight exceeds the limit of your vehicle and could result in engine damage, transmission damage, structural damage, loss of vehicle control, vehicle rollover and personal injury.
Page 249 TRAILER SWAY CONTROL (IF EQUIPPED) WARNING: Turning off trailer sway control increases the risk of loss of vehicle control, serious injury or death. Ford does not recommend disabling this feature except in situations where speed reduction may be detrimental (such as hill climbing), the driver has significant trailer towing experience, and can control trailer sway and maintain safe operation.
Page 250 Towing Powertrain Maximum GCWR Maximum trailer weight 2.0L GTDI front-wheel 6170 lb (2799 kg) 1500 lb (680 kg) drive 3.5L TiVCT front-wheel 8210 lb (3724 kg) 2000 lb (907 kg) drive 3.5L TiVCT front-wheel 8210 lb (3724 kg) 3500 lb (1588 kg) drive 3.5L TiVCT all-wheel 8400 lb (3810 kg)
Page 251 Towing Trailer Towing Connector (Vehicles Equipped with a Trailer-towing or Prep Package) The trailer towing connector is located under the rear bumper, on the left side of your vehicle. You must use a four-pin trailer wiring connector for your vehicle and the trailer lighting equipment. Color Function 1.
Page 252 Towing Trailer Brakes WARNING: Do not connect a trailer’s hydraulic brake system directly to your vehicle’s brake system. Your vehicle may not have enough braking power and your chances of having a collision greatly increase. Electric brakes and manual, automatic or surge-type trailer brakes are safe if you install them properly and adjust them to the manufacturer’s specifications.
Page 253 Towing • When stopped in congested or heavy traffic during hot weather, place the gearshift in position P to aid engine and transmission cooling and to help air conditioning performance. • Turn off the speed control with heavy loads or in hilly terrain. The speed control may turn off automatically when you are towing on long, steep grades.
Page 254: Wrecker Towing
We recommend the use of a wheel lift and dollies or flatbed equipment to tow your vehicle. Do not tow with a slingbelt. Ford Motor Company has not approved a slingbelt towing procedure. Vehicle damage may occur if towed incorrectly, or by any other means.
Page 255: Recreational Towing
Towing Front-wheel drive vehicles must have the front wheels placed on a tow dolly when towing your vehicle from the rear using wheel lift equipment. This prevents damage to the transmission. Towing an all-wheel drive vehicle requires that all wheels be off the ground, such as using a wheel lift and dollies or flatbed equipment.
Page 256 Towing Vehicles Equipped with a 3.5L or 3.7L Engine Note: Put your climate control system in recirculated air mode to prevent exhaust fumes from entering your vehicle. See the Climate Control chapter. Follow these guidelines if you have a need for recreational towing, such as towing your vehicle behind a motorhome or truck.
Page 257: Driving Hints
Driving Hints BREAKING-IN You need to break in new tires for approximately 300 miles (480 kilometers). During this time, your vehicle may exhibit some unique driving characteristics. Avoid driving too fast during the first 1000 miles (1600 kilometers). Vary your speed frequently and change up through the gears early.
Page 258: Driving Through Water
Driving Hints • Add particular accessories to your vehicle (e.g.; bug deflectors, rollbars or light bars, running boards, ski racks). • Drive with the wheels out of alignment. DRIVING THROUGH WATER WARNING: Drive through water in an emergency only, and not as part of normal driving.
Page 259: Floor Mats
Driving Hints FLOOR MATS WARNING: Always use floor mats that are designed to fit the footwell of your vehicle. Only use floor mats that leave the pedal area unobstructed. Only use floor mats that are firmly secured to retention posts so that they cannot slip out of position and interfere with the pedals or impair safe operation of your vehicle in other ways.
Page 260 Driving Hints WARNING (Continued) • Failure to properly follow floor mat installation or attachment instructions can potentially cause interference with pedal operation causing loss of control of vehicle. • To install floor mats, position the floor mat so that the eyelet is over the retention post and press down to lock in.
Page 261: Roadside Emergencies
ROADSIDE ASSISTANCE Vehicles Sold in the U.S.: Getting Roadside Assistance To fully assist you should you have a vehicle concern, Ford Motor Company offers a complimentary roadside assistance program. This program is separate from the New Vehicle Limited Warranty. The service is available: •...
Page 262: Hazard Warning Flashers
U.S. Ford vehicle customers who require Roadside Assistance, call 1-800-241-3673. If you need to arrange roadside assistance for yourself, Ford Motor Company will reimburse a reasonable amount for towing to the nearest dealership within 35 miles (56 kilometers). To obtain reimbursement information, U.S.
Page 263: Jump-Starting The Vehicle
Roadside Emergencies Should your vehicle shut off after a collision, you may restart your vehicle by doing the following: 1. Turn the ignition off. 2. Turn the ignition on. 3. Repeat steps 1 and 2 to re-enable fuel pump. Note: If your vehicle has the push button start system, press the stop/start button twice to reactivate the fuel system.
Page 264 Roadside Emergencies Connecting the Jumper Cables WARNING: Do not connect the end of the second cable to the negative (-) terminal of the battery to be jumped. A spark may cause an explosion of the gases that surround the battery. Note: Do not attach the negative (-) cable to fuel lines, engine rocker covers, the intake manifold or electrical components as grounding points.
Page 265 Roadside Emergencies Jump Starting 1. Start the engine of the booster vehicle and run the engine at a moderately increased speed. 2. Start the engine of the disabled vehicle. 3. Once the disabled vehicle has been started, run both engines for an additional three minutes before disconnecting the jumper cables.
Page 266: Customer Assistance
A reasonable time must be allowed to perform a repair after taking your vehicle to the authorized dealer. Repairs will be made using Ford or Motorcraft parts, or remanufactured or other parts that are authorized by Ford.
Page 267 • The name of the authorized dealer and city where located • The vehicle’s current odometer reading. In some states, you must directly notify Ford in writing before pursuing remedies under your state’s warranty laws. Ford is also allowed a final repair attempt in some states.
Page 268 In the case of 1 or 2 above, the consumer must also notify the manufacturer of the need for the repair of the nonconformity at the following address: Ford Motor Company 16800 Executive Plaza Drive Mail Drop 3NE-B Dearborn, MI 48126...
Page 269 BBB Auto Line dispute, and decision, are admissible in the court action. Should you choose to accept the BBB AUTO LINE decision, Ford is then bound by the decision, and must comply with the decision within 30 days of receipt of your acceptance letter.
Page 270 ONLY) This pertains to vehicles delivered to authorized Canadian dealers. In those cases, where you continue to feel that the efforts by Ford of Canada and the authorized dealer to resolve a factory-related vehicle service concern have been unsatisfactory, Ford of Canada participates in an impartial third party mediation or arbitration program administered by the Canadian Motor Vehicle Arbitration Plan (CAMVAP).
Page 271 Central America, the Caribbean, and Israel, contact the nearest authorized dealer. If the authorized dealer cannot help you, contact: FORD MOTOR COMPANY FORD EXPORT OPERATIONS & GLOBAL INITIATIVES Customer Relationship Center 1555 Fairlane Drive Fairlane Business Park #3 Allen Park, Michigan 48101 U.S.A.
Page 272 If you buy your vehicle in North America and then relocate to any of the above locations, register your vehicle identification number (VIN) and new address with Ford Motor Company Export Operations & Global Growth Initiatives by emailing expcac@ford.com. If you are in another foreign country, contact the nearest authorized dealer.
Page 273: Reporting Safety Defects (U.s. Only)
However, NHTSA cannot become involved in individual problems between you, your dealer, or Ford Motor Company. To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1–888–327–4236 (TTY: 1–800–424–9153);...
Page 274: Fuses
Fuses CHANGING A FUSE Fuses WARNING: Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. If electrical components in your vehicle are not working, a fuse may have blown.
Page 275: Fuse Specification Chart
Fuses FUSE SPECIFICATION CHART Power Distribution Box WARNING: Always disconnect the battery before servicing high current fuses. WARNING: To reduce risk of electrical shock, always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs. The power distribution box is located in the engine compartment.
Page 276 Fuses Fuse or relay Fuse amp Protected components number rating 40A** Anti-lock brake system pump — Not used 30A** Power liftgate 20A** Moonroof 20A** Power point #2 (console rear) — Not used — Rear window defroster and heated mirror relay —...
Page 277 Fuses Fuse or relay Fuse amp Protected components number rating — Not used — Rear seat relay — Right trailer tow stop/turn lamps relay — Not used 40A** Cooling fan (vehicles with trailer tow) 60A** Cooling fan (vehicles without trailer tow) 40A** Cooling fan (trailer tow only) —...
Page 278 Fuses Fuse or relay Fuse amp Protected components number rating 15A* Stop lamps 10A* Rear seat release 10A* Air conditioner clutch 15A* Trailer tow stop/turn lamps relay 20A* Rear wiper motor 15A* Fuel pump — Powertrain control module relay 20A* Vehicle power #2 15A* Vehicle power #4...
Page 279 Fuses Fuse or relay Fuse amp Protected components number rating — Not used 7.5A* Powertrain control module relay, Powertrain control module keep-alive (3.5/3.7L engines) Run/start relay — Run/start relay — Not used Headlamp leveling motors (China only) 10A* Powertrain control module, Transmission Control Module (2.0L engine) 10A*...
Page 280 Fuses Passenger Compartment Fuse Panel The fuse panel is located behind a trim panel on the left side of the driver’s footwell near the parking brake. To remove the trim panel, slide the release lever to the right then pull the trim panel out. To remove the fuse panel cover, press in the tabs on both sides of the cover, then pull the cover off.
Page 281 Fuses Fuse or relay Fuse amp Protected components number rating Driver front smart window Not used (spare) Not used (spare) Demand lamps relay Not used (spare) Radio frequency module 7.5A Power mirror switch, Memory seat switch, Driver seat module Not used (spare) Power liftgate Run/accessory relay Instrument panel cluster,...
Page 282 Fuses Fuse or relay Fuse amp Protected components number rating Steering wheel control, Intelligent access, Headlamp switch On-board diagnostics Liftgate release Global positioning system module Intelligent access Ignition switch (without intelligent access), Key inhibit solenoid, Push button start (with intelligent access) Radio, Multi-function display screen, Electronic finish panel, SYNC module...
Page 283 Fuses Fuse or relay Fuse amp Protected components number rating 7.5A Occupant classification sensor, Restraints control module Grade assist control switch (2.0L engine) Not used (spare) Not used (spare) Not used (spare) Climate control LED signal mirrors 30A Circuit Power windows Breaker —...
Page 284: Maintenance
GENERAL INFORMATION Have your vehicle serviced regularly to help maintain its roadworthiness and resale value. There is a large network of Ford authorized dealers who are there to help you with their professional servicing expertise. We believe that their specially trained technicians are best qualified to service your vehicle properly and expertly.
Page 285: Opening And Closing The Hood
Maintenance OPENING AND CLOSING THE HOOD 1. Inside the vehicle, pull the hood release handle located under the bottom of the instrument panel near the steering column. 2. Go to the front of the vehicle and release the secondary hood latch that is located under the front center of the hood.
Page 286: Under Hood Overview
Maintenance UNDER HOOD OVERVIEW 2.0L EcoBoost® engine A. Engine coolant reservoir B. Brake fluid reservoir C. Battery D. Power distribution box E. Air filter assembly F. Engine oil filler cap G. Engine oil dipstick H. Windshield washer fluid reservoir 2013 Edge (edg) Owners Guide gf, 4th Printing, November 2012 USA (fus)
Page 287 Maintenance 3.5L V6 engine shown, 3.7L V6 engine similar A. Engine coolant reservoir B. Power steering fluid reservoir C. Brake fluid reservoir D. Battery E. Power distribution box F. Air filter assembly G. Transmission fluid dipstick H. Engine oil dipstick I.
Page 288: Engine Oil Dipstick
Specification Advisory Council (ILSAC), comprised of U.S. and Japanese automobile manufacturers. 1. Remove the filler cap. 2. Add engine oil that meets Ford specifications. See Capacities and Specifications for more information. 3. Replace the filler cap. Turn it until you feel a strong resistance.
Page 289: Engine Coolant Check
Note: For best results, coolant concentration should be tested with a refractometer such as Rotunda tool ROB75240 available from your dealer. Ford does not recommend the use of hydrometers or coolant test strips for measuring coolant concentrations. Note: Automotive fluids are not interchangeable; do not use engine coolant/antifreeze or windshield washer fluid outside of its specified function and vehicle location.
Page 290 Unscrew the cap slowly. Any pressure will escape as you unscrew the cap. Add prediluted engine coolant meeting the Ford specification. See Capacities and Specifications for more information. Whenever coolant has been added, the coolant level in the coolant reservoir should be checked the next few times you drive the vehicle.
Page 291 Severe Climates If you drive in extremely cold climates: • It may be necessary to have a Ford authorized dealer increase the coolant concentration above 50%. • A coolant concentration of 60% will provide improved freeze point protection.
Page 292 Maintenance You may notice a reduction in the vehicle’s speed caused by reduced engine power. Your vehicle has been designed to enter this mode if certain high temperature/high load conditions take place in order to manage the engine’s fluid temperatures. The amount of speed reduction will depend on the vehicle loading, towing, grade, ambient temperature, and other factors.
Page 293 Maintenance How Fail-Safe Cooling Works If the engine begins to overheat, the engine coolant temperature gauge will move to the red (hot) area and: The coolant temperature warning light will illuminate. The service engine soon indicator will illuminate. If the engine reaches a preset over-temperature condition, the engine will automatically switch to alternating cylinder operation.
Page 294: Automatic Transmission Fluid Check
Maintenance You have limited engine power when in the fail-safe mode, so drive the vehicle with caution. The vehicle will not be able to maintain high-speed operation and the engine will run rough. Remember that the engine is capable of completely shutting down automatically to prevent engine damage, therefore: 1.
Page 295 Maintenance 4. Latch the gearshift lever in P (Park) and leave the engine running. 5. Remove the dipstick, wiping it clean with a clean, dry lint free rag. If necessary, refer to Under hood overview in this chapter for the location of the dipstick.
Page 296 Maintenance Adjusting automatic transmission fluid levels Note: Use of a non-approved automatic transmission fluid may cause internal transmission component damage. Before adding any fluid, make sure the correct type is used. The type of fluid used is normally indicated on the dipstick and also in the Capacities and Specifications chapter.
Page 297: Brake Fluid Check
Add fluid to fill the reservoir if the level is low. Only use a washer fluid that meets Ford specifications. See the technical specifications chart in the Capacities and Specifications chapter. Note: The front and rear washer systems are supplied from the same reservoir.
Page 298: Changing The Vehicle Battery
Maintenance CHANGING THE VEHICLE BATTERY WARNING: Batteries normally produce explosive gases which can cause personal injury. Therefore, do not allow flames, sparks or lighted substances to come near the battery. When working near the battery, always shield your face and protect your eyes. Always provide proper ventilation.
Page 299 When a battery replacement is required, the battery should only be replaced with a Ford recommended replacement battery that matches the electrical requirements of the vehicle. When the battery is disconnected or a new battery installed, the automatic transmission must relearn its adaptive strategy.
Page 300: Checking The Wiper Blades
Maintenance • Note: If you do not allow the engine to relearn its idle trim, the idle quality of your vehicle may be adversely affected until the idle trim is eventually relearned. If the battery has been disconnected or a new battery has been installed, the clock and radio settings must be reset once the battery is reconnected.
Page 301: Air Filter(S)
Maintenance Changing rear window wiper blade The rear wiper arm is designed without a service position. This reduces the risk of damage to the blade in an automatic car wash. To replace the wiper blade: 1. Grab the wiper arm with one hand close to the arm/blade joint and pull it as far away from the glass as possible.
Page 302: Adjusting The Headlamps
Maintenance Changing the air filter element 1. Release the clamps that secure the air filter housing cover. 2. Carefully separate the two halves of the air filter housing. 3. Remove the air filter element from the air filter housing. 4. Wipe the air filter housing and cover clean to remove any dirt or debris and to ensure good sealing.
Page 303 Maintenance • (1) 8 feet (2.4 meters) • (2) Center height of lamp to ground • (3) 25 feet (7.6 meters) • (4) Horizontal reference line 2. Measure the height of the headlamp bulb center from the ground and mark an 8 foot (2.4 meter) horizontal reference line on the vertical wall or screen at this height.
Page 304: Changing A Bulb
Maintenance 4. Locate the vertical adjuster on each headlamp. Using a Hex head driver, turn the adjuster either clockwise or counterclockwise in order to adjust the vertical aim of the headlamp. 5. Close the hood and turn off the lamps. HORIZONTAL AIM IS NOT REQUIRED FOR THIS VEHICLE AND IS NON-ADJUSTABLE.
Page 305 Maintenance Replacing headlamp bulbs WARNING: Handle a halogen headlamp bulb carefully and keep out of children’s reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause the bulb to break the next time the headlamps are operated. Note: If the bulb is accidentally touched, it should be cleaned with rubbing alcohol before being used.
Page 306 Maintenance Replacing HID headlamp bulbs (if equipped) The low beam headlamps on your vehicle use a “high intensity discharge” source. These lamps operate at a high voltage. When the bulb is burned out, the bulb and starter capsule assembly must be replaced by your authorized dealer.
Page 307 Maintenance Replacing high-mount brake lamp bulbs Your vehicle is equipped with an LED center high-mount stop lamp. It is designed to last the life of the vehicle. If replacement is required, see your authorized dealer. Replacing license plate lamp bulbs 1.
Page 308: Bulb Specification Chart
Maintenance BULB SPECIFICATION CHART Replacement bulbs are specified in the chart below. Headlamp bulbs must be marked with an authorized “D.O.T.” for North America and an “E” for Europe to ensure lamp performance, light brightness and pattern and safe visibility. The correct bulbs will not damage the lamp assembly or void the lamp assembly warranty and will provide quality bulb burn time.
Page 309: Vehicle Care
Vehicle Care GENERAL INFORMATION Your Ford or Lincoln authorized dealer has many quality products available to clean your vehicle and protect its finishes. CLEANING PRODUCTS For best results, use the following products or products of equivalent quality: Motorcraft® Bug and Tar Remover (ZC-42) Motorcraft®...
Page 310 Vehicle Care • Immediately remove items such as gasoline, diesel fuel, bird droppings and insect deposits because they can cause damage to the vehicle’s paintwork and trim over time. Use Motorcraft Bug and Tar Remover. • Note: Suntan lotions and insect repellents can damage any painted surface;...
Page 311: Waxing
Vehicle Care WAXING Regular waxing is necessary to protect the paint on your car from the elements. We recommend that you wash and wax the painted surface once or twice a year. When washing and waxing, park your vehicle in a shaded area out of direct sunlight.
Page 312: Cleaning The Windows And Wiper Blades
Vehicle Care • Spray Motorcraft Engine Shampoo and Degreaser on all parts that require cleaning and pressure rinse clean. In Canada, use Motorcraft Engine Shampoo. • Never wash or rinse the engine while it is hot or running; water in the running engine may cause internal damage.
Page 313: Cleaning The Interior
Vehicle Care CLEANING THE INTERIOR WARNING: Do not use cleaning solvents, bleach or dye on the vehicle’s safety belts, as these actions may weaken the belt webbing. WARNING: On vehicles equipped with seat-mounted airbags, do not use chemical solvents or strong detergents. Such products could contaminate the side airbag system and affect performance of the side airbag in a collision.
Page 314: Cleaning Leather Seats
Vehicle Care • Be certain to wash or wipe your hands clean if you have been in contact with certain products, such as insect repellent and suntan lotion, in order to avoid possible damage to the interior painted surfaces. • Do not use household or glass cleaners as these may damage the finish of the instrument panel, interior trim and cluster lens.
Page 315: Cleaning The Alloy Wheels
Vehicle Care CLEANING THE ALLOY WHEELS Note: Do not use chrome cleaner, metal cleaner or polish on wheels and wheel covers. A clearcoat paint finish coats aluminum wheels and wheel covers. In order to maintain their condition: • Clean weekly with Motorcraft Wheel and Tire Cleaner. Use a sponge to remove heavy deposits of dirt and brake dust accumulation.
Page 316 Vehicle Care Body • Wash vehicle thoroughly to remove dirt, grease, oil, tar or mud from exterior surfaces, rear-wheel housing and underside of front fenders. • Periodically wash vehicles stored in exposed locations. • Touch up raw or primed metal to prevent rust. •...
Page 317 Vehicle Care Brakes • Make sure brakes and parking brake are fully released. Tires • Maintain recommended air pressure. Miscellaneous • Make sure all linkages, cables, levers and pins under vehicle are covered with grease to prevent rust. • Move vehicles at least 25 feet (8 meters) every 15 days to lubricate working parts and prevent corrosion.
Page 318: Wheels And Tires
Wheels and Tires GENERAL INFORMATION Important Information for P265/40R22 Low-profile Tires and Wheels Note: Your vehicle’s warranty does not cover these types of damage. Tires should always be kept at the correct inflation pressures and extra caution should be taken when operating on rough roads to avoid impacts that could cause wheel and tire damage.
Page 319 Wheels and Tires Study your owner’s manual for specific information about equipment features, instructions for safe driving and additional precautions to reduce the risk of an accident or serious injury. All-Wheel Drive System (If Equipped) WARNING: Do not become overconfident in the ability of all-wheel drive vehicles.
Page 320: Tire Care
Wheels and Tires How Your Vehicle Differs from Other Vehicles Crossover vehicles can differ from some other vehicles in a few noticeable ways. Your vehicle may • Higher – to allow higher load carrying capacity. • Shorter – to give it the capability to approach inclines.
Page 321 10 to 12 inches or limited production tires as defined in Title 49 Code of Federal Regulations Part 575.104(c)(2). U.S. Department of Transportation-Tire quality grades: The U.S. Department of Transportation requires Ford Motor Company to give you the following information about tire grades exactly as the government has written it.
Page 322 Wheels and Tires to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure. The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 139. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law.
Page 323 Wheels and Tires • Tread area of the tire: Area of the perimeter of the tire that contacts the road when mounted on the vehicle. • Rim: The metal support (wheel) for a tire or a tire and tube assembly upon which the tire beads are seated.
Page 324 Wheels and Tires D. R: Indicates a radial type tire. E. 15: Indicates the wheel or rim diameter in inches. If you change your wheel size, you will have to purchase new tires to match the new wheel diameter. F. 95: Indicates the tire’s load index. It is an index that relates to how much weight a tire can carry.
Page 325 Wheels and Tires H. U.S. DOT Tire Identification Number (TIN): This begins with the letters DOT and indicates that the tire meets all federal standards. The next two numbers or letters are the plant code designating where it was manufactured, the next two are the tire size code and the last four numbers represent the week and year the tire was built.
Page 326 Wheels and Tires M. Maximum Inflation Pressure: Indicates the tire manufacturer’s maximum permissible pressure or the pressure at which the maximum load can be carried by the tire. This pressure is normally higher than the vehicle manufacturer’s recommended cold inflation pressure, which can be found on the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver’s seating position), or Tire Label which...
Page 327 Wheels and Tires Information on T Type Tires T type tires have some additional information beyond those of P type tires. These differences are described below. T145/80D16 is an example of a tire size. Note: The temporary tire size for your vehicle may be different from this example.
Page 328 You are strongly urged to buy a reliable tire pressure gauge, as automatic service station gauges may be inaccurate. Ford recommends the use of a digital or dial-type tire pressure gauge rather than a stick-type tire pressure gauge.
Page 329 Wheels and Tires on the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver’s seating position), or Tire Label which is located on the B-Pillar or the edge of the driver’s door. The cold inflation pressure should never be set lower than the recommended pressure on the Safety Compliance Certification Label or Tire Label.
Page 330 Wheels and Tires 6. Visually inspect the tires to make sure there are no nails or other objects embedded that could poke a hole in the tire and cause an air leak. 7. Check the sidewalls to make sure there are no gouges, cuts or bulges. Inspecting Your Tires and Wheel Valve Stems Periodically inspect the tire treads for uneven or excessive wear and remove objects such as stones, nails or glass that may be wedged in the...
Page 331 Wheels and Tires WARNING: Age Tires degrade over time depending on many factors such as weather, storage conditions, and conditions of use (such as load, speed, inflation pressure) the tires experience throughout their lives. In general, tires should be replaced after six years regardless of tread wear.
Page 332 B-Pillar or edge of the driver’s door. If this information is not found on these labels, then you should contact your authorized dealer as soon as possible. Use of any tire or wheel not recommended by Ford can affect the safety and performance of your vehicle, which could result in an increased risk of loss of vehicle control, vehicle rollover, personal injury and death.
Page 333 The tire pressure sensors mounted in the wheels (originally installed on your vehicle) are not designed to be used in aftermarket wheels. The use of wheels or tires not recommended by Ford Motor Company may affect the operation of your tire pressure monitoring system.
Page 334 Wheels and Tires If you feel a sudden vibration or ride disturbance while driving, or you suspect your tire or vehicle has been damaged, immediately reduce your speed. Drive with caution until you can safely pull off the road. Stop and inspect the tires for damage.
Page 335: Using Snow Chains
USING SNOW CHAINS WARNING: Snow tires must be the same size, load index, speed rating as those originally provided by Ford. Use of any tire or wheel not recommended by Ford can affect the safety and performance of your vehicle, which could result in an increased risk of loss of vehicle control, vehicle rollover, personal injury and death.
Page 336: Tire Pressure Monitoring System (Tpms)
Wheels and Tires • Do not exceed 30 mph (48 km/h) with tire cables on your vehicle. • Remove the tire cables when they are no longer needed. Do not use tire cables on dry roads. TIRE PRESSURE MONITORING SYSTEM WARNING: The tire pressure monitoring system is NOT a substitute for manually checking tire pressure.
Page 337 Wheels and Tires may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly.
Page 338 Wheels and Tires To restore the full function of the tire pressure monitoring system, have the damaged road wheel and tire assembly repaired and remounted on your vehicle. For additional information, see Changing Tires with a Tire Pressure Monitoring System in this section. When You Believe Your System Is Not Operating Properly The main function of the tire pressure monitoring system is to warn you when your tires need air.
Page 339 Wheels and Tires Low tire Possible cause Customer action required pressure warning light Flashing Spare tire in use Repair the damaged road wheel warning light and tire assembly and reinstall it on the vehicle to restore system function. For a description on how the system functions, see When Your Temporary Spare Tire is Installed in this section.
Page 340: Changing A Road Wheel
Ford. If the dissimilar spare tire or wheel is damaged, it should be replaced rather than repaired.
Page 341 Wheels and Tires 2. Full-size dissimilar spare with label on wheel: This spare tire has a label on the wheel that states: THIS TIRE AND WHEEL FOR TEMPORARY USE ONLY When driving with one of the dissimilar spare tires listed above, do not: •...
Page 342 Wheels and Tires • Ground clearance and parking at curbs • Winter weather driving capability • Wet weather driving capability • All-wheel driving capability (if applicable) • Load leveling adjustment (if applicable) When driving with the full-size dissimilar spare tire and wheel assembly, additional caution should be given to: •...
Page 343 Wheels and Tires WARNING: Always use the jack provided as original equipment with your vehicle. If using a jack other than the one provided as original equipment with your vehicle, make sure the jack capacity is adequate for the vehicle weight, including any vehicle cargo or modifications.
Page 344 Wheels and Tires 9. The vehicle jacking points are shown here, and are depicted on the yellow warning label on the jack. Note: Jack at the specified locations to avoid damage to the vehicle. 10. Small arrow-shaped marks on the sills show the location of the jacking points.
Page 345: Technical Specifications
Wheels and Tires Stowing the Flat/Spare Tire and Jack Note: If you are stowing a flat 22 inch tire and wheel assembly, temporarily remove the load floor, plastic stowage bins, and the foam load floor supports to make space. Place the 22 inch tire and wheel assembly in the spare tire well with the valve stem facing down.
Page 346 N•m ⁄ x 20 * Torque specifications are for nut and bolt threads free of dirt and rust. Use only Ford recommended replacement fasteners. Note: Inspect the wheel pilot hole and mounting surface prior to installation. Remove any visible corrosion or loose particles.
Page 347: Capacities And Specifications
Capacities and Specifications ENGINE SPECIFICATIONS Engine 3.5L V6 engine 3.7L V6 engine 2.0L EcoBoost engine Cubic inches Required fuel Minimum Minimum Minimum 87 octane 87 octane 87 octane Firing order 1–4–2–5–3–6 1–4–2–5–3–6 1–3–4–2 Ignition system Coil on plug Coil on plug Coil on plug .029 inch +/- 0.049–0.053 inch...
Page 348 Capacities and Specifications 2013 Edge (edg) Owners Guide gf, 4th Printing, November 2012 USA (fus)
Page 349 Capacities and Specifications 2013 Edge (edg) Owners Guide gf, 4th Printing, November 2012 USA (fus)
Page 350 Capacities and Specifications 2013 Edge (edg) Owners Guide gf, 4th Printing, November 2012 USA (fus)
Page 351 Capacities and Specifications 2013 Edge (edg) Owners Guide gf, 4th Printing, November 2012 USA (fus)
Page 352: Part Numbers
WW-2001-PF (passenger side) blade WW-1401-PF (rear) Replace the spark plugs with ones that meet Ford material and design specifications for your vehicle, such as Motorcraft® or equivalent replacement parts. The customer warranty may be void for any damage to the engine if such spark plugs are not used.
Page 353: Vehicle Certification Label
Capacities and Specifications The Vehicle Identification Number (VIN) contains the following information: A. World manufacturer identifier B. Brake system / Gross Vehicle Weight Rating (GVWR) / Restraint Devices and their location C. Make, vehicle line, series, body type D. Engine type E.
Page 354: Transmission Code Designation
Capacities and Specifications TRANSMISSION CODE DESIGNATION You can find a transmission code on the Safety Compliance Certification Label. The following table tells you which transmission each code represents. Description Code 6-speed automatic transmission (6F50) 6-speed automatic transmission (6F35) 2013 Edge (edg) Owners Guide gf, 4th Printing, November 2012 USA (fus)
Page 355: Accessories
Ford Motor Company will warrant your vehicle through the warranty that provides the greatest benefit: • 12 months or 12000 miles (20000 kilometers) (whichever occurs first).
Page 356 • Bumper and hitch mounted parking sensors* • Car cover* *The accessory manufacturer designs, develops and therefore warrants Ford Licensed Accessories, and does not design or test these accessories to Ford Motor Company engineering requirements. Contact an authorized Ford dealer for the manufacturer’s limited warranty details, and request a copy of the Ford Licensed Accessories product limited warranty from the accessory manufacturer.
Page 357 Accessories • If you or an authorized Ford dealer add any non-Ford custom electrical or electronic accessories or components to your vehicle, you may adversely affect battery performance and durability. In addition, you may also adversely affect the performance of other electrical systems in the vehicle.
Page 358: Ford Extended Service Plan
3. BaseCARE – Covers 84 components 4. PowertrainCARE – Covers 29 critical components Ford ESP is honored by all Ford and Lincoln Dealers in the United States and Canada. It is the only Extended Service Plan authorized and backed by Ford Motor Company. That means you get: •...
Page 359 • Destination assistance for taxi, shuttle, rental car coverage and emergency transportation Transferable Coverage If you sell your vehicle before your Ford Extended Service Plan coverage expires, you can transfer any remaining coverage to the new owner. Whenever you sell your vehicle, prospective buyers may have a higher...
Page 360 To learn more, call our Ford ESP specialists at 800-367-3377. Don’t forget to ask about our interest free payment program, allowing you all the security and benefits Ford ESP has to offer while paying over time. You are pre-approved with no credit checks, no hassles!
Page 361: Scheduled Maintenance
Parts installed at your dealership carry a nationwide 12-month or 12000-mile (20000 kilometers) parts and labor limited warranty. If you do not use Ford authorized parts they may not meet our specifications and depending on the part, it could affect emissions compliance.
Page 362 Ford Motor Company has recommended maintenance intervals for various parts and component systems based upon engineering testing. Ford Motor Company relies upon this testing to determine the most appropriate mileage for replacement of oils and fluids to protect your vehicle at the lowest overall cost to you and recommends against maintenance schedules that deviate from the scheduled maintenance information.
Page 363 Scheduled Maintenance chemicals or additives not approved by Ford Motor Company are not recommended as part of normal maintenance. Please consult your warranty information. Oils, Fluids and Flushing In many cases, fluid discoloration is a normal operating characteristic and, by itself, does not necessarily indicate a concern or that the fluid needs to be changed.
Page 364 In order to keep your vehicle running right, it is important to have the systems on your vehicle checked regularly. This can help identify potential issues and prevent major problems. Ford Motor Company recommends the following multi-point inspection be performed at every scheduled maintenance interval to help make sure your vehicle keeps running great.
Page 365 Scheduled Maintenance 2013 Edge (edg) Owners Guide gf, 4th Printing, November 2012 USA (fus)
Page 366: Normal Scheduled Maintenance And Log
Scheduled Maintenance NORMAL SCHEDULED MAINTENANCE AND LOG Intelligent Oil-Life Monitor® Your vehicle is equipped with an Intelligent Oil-Life Monitor that determines when the engine oil needs to be changed based on how your vehicle is used. By using several important factors in its calculations, the monitor helps reduce the cost of owning your vehicle and reduce environmental waste at the same time.
Page 367 Scheduled Maintenance Normal scheduled maintenance At every oil change Change engine oil and filter. interval as indicated by Rotate tires, inspect tire wear and measure the information display tread depth. Perform multi-point inspection (recommended). Inspect automatic transmission fluid level (if equipped with dipstick).
Page 368 Scheduled Maintenance Other maintenance items Every 20000 miles Replace cabin air filter, or clean screen. (32000 km) Every 30000 miles Replace engine air filter. (48000 km) At 100000 miles Change engine coolant. (160000 km) Every 100000 miles Replace spark plugs. (160000 km) Inspect accessory drive belt(s).
Page 369 Scheduled Maintenance Maintenance Schedule Log EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS...
Page 370 Scheduled Maintenance EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE...
Page 371 Scheduled Maintenance EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE...
Page 372 Scheduled Maintenance SPECIAL OPERATING CONDITIONS If you operate your vehicle primarily in any of the following conditions, you need to perform additional maintenance as indicated. If you occasionally operate your vehicle under any of these conditions, it is not necessary to perform the additional maintenance. For specific recommendations, see your dealership service advisor or technician.
Page 373 Scheduled Maintenance Extensive idling or low-speed driving for long distances as in heavy commercial use (such as delivery, taxi, patrol car or livery) Every 30000 miles Change automatic transmission fluid. (48000 km) Every 60000 miles Replace spark plugs. (96000 km) Operating in dusty or sandy conditions such as unpaved or dusty roads Inspect frequently,...
Page 374 Scheduled Maintenance Special Operating Condition Log EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#:...
Page 375 Scheduled Maintenance EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE...
Page 376 Normal vehicle axle maintenance: Rear axles and power take-off units with synthetic fluid and light-duty trucks equipped with Ford-design axles are lubricated for life; do not check or change fluid unless a leak is suspected, service is required or the assembly has been submerged in water.
Page 377 Scheduled Maintenance Engine air filter & cabin air filter replacement: Engine air filter and cabin air filter life is dependent on exposure to dusty and dirty conditions. Vehicles operated in these conditions require frequent inspection and replacement of the engine air filter and cabin air filter. ENGINE COOLANT CHANGE RECORD Initial change Six years or 100000 miles (160000 km)
Page 378: Sync
SYNC® SYNC is an in-vehicle communications system that works with your Bluetooth-enabled cellular phone and portable media player. This allows you to: • Make and receive calls. • Access and play music from your portable music player. • Use 911 Assist, Vehicle Health Report and SYNC Services (Traffic, Directions &...
Page 379 SYNC® GENERAL INFORMATION Make sure you review your device’s manual before using it with SYNC. Support The SYNC support team is available to help you with any questions you cannot answer on your own. Monday-Saturday, 8:30am-9:00pm EST. Sunday, 10:30am-7:30pm EST. In the United States, call: 1–800–392–3673.
Page 380 Master Reset to erase all stored information. System data cannot be accessed without special equipment and access to the vehicle’s SYNC module. Ford Motor Company and Ford of Canada do not access the system data for any purpose other than as described...
Page 381 SYNC® USING VOICE RECOGNITION This system helps you control many features using voice commands. This allows you to keep your hands on the wheel and focus on what is in front of you. Initiating a Voice Session Push the voice icon; a tone sounds and Listening appears in the display.
Page 382 SYNC® Adjusting the Interaction Level Push the voice icon; when prompted, say “Voice settings”, then any of the following: When you say: The system: “Interaction mode standard” Provides more detailed interaction and guidance. “Interaction mode advanced” Provides less audible interaction and more tone prompts.
Page 383: Pairing Your Phone For The First Time
SYNC® USING SYNC WITH YOUR PHONE Hands-free calling is one of the main features of SYNC. While the system supports a variety of features, many are dependent on your cellular phone’s functionality. At a minimum, most cellular phones with Bluetooth wireless technology support the following functions: •...
Page 384 SYNC® Pairing Subsequent Phones Note: To scroll through the menus, press the up and down arrows on your audio system. Note: Make sure the vehicle ignition and radio are turned on and that the transmission is in position P. 1. Press the phone button and scroll until System Settings is selected. 2.
Page 385 SYNC® “PHONE” “Phone book <name> at work” OR “Phone book <name> at office” “Call history incoming” “Connections” “Go to privacy” “Hold” These commands do not require you to say “Phone” first. These commands are not available until phone information is completely downloaded using Bluetooth.
Page 386 SYNC® Phone book commands: When you ask SYNC® to access a phone book name, number, etc., the requested information appears in the display to view. Press the phone button and say “Call” to call the contact. “DIAL” “411” (four-one-one), “911” (nine-one-one) “700 (seven hundred)”...
Page 387 SYNC® Phone Options during an Active Call During an active call, you have additional menu features which become available such as putting a call on hold, joining calls, etc. Use the arrow buttons to scroll through the menu options. To access: 1.
Page 388 SYNC® When you select: You can: Phonebook Access your phonebook contacts. 1. Press OK to select, then scroll through your phonebook contacts. 2. Press OK again when the desired selection appears in the display. 3. Press the phone button. Access your call history log. Call History 1.
Page 389 SYNC® Accessing Features through the Phone Menu SYNC’s phone menu allows you to redial a number, access your call history and phone book and send text messages as well as access phone and system settings. You can also access advanced features, such as 911 Assist, Vehicle Health Report and SYNC Services.
Page 390 SYNC® When you select: You can: Text Message Enables you to send, download and delete text messages. Phone Settings Allows you to view your phone’s status, set ring tones, select your message notification, change phone book entries and automatically download your cellular phone among other features.
Page 391 SYNC® Receiving a Text Message Note: This is a phone-dependent feature. Your phone must support downloading text messages using Bluetooth to receive incoming text messages. Note: Forwarding a text message is a speed-dependent feature and can only be done when the vehicle is traveling at 3 mph (5 km/h) or less. Note: Only one recipient is allowed per text message.
Page 392 6. Press OK when the contact appears and press OK again to confirm when the system asks if you would like to send the message. Each text message is sent with the following signature: “This message was sent from my <Ford or Lincoln>”. Pre-defined text message options Can’t talk right now...
Page 393 SYNC® Accessing Your Phone Settings These are phone-dependent features. Your phone settings allow you to access and adjust features such as your ring tone, text message notification, modify your phone book and also set up automatic download. 1. Press the phone button. 2.
Page 394 SYNC® When you select: You can: Modify Phonebook Modify the contents of your phone book (such as add, delete, download). Press OK to select and scroll between: Add Contacts: Press OK to add more contacts from your phone book. Push the desired contact(s) on your phone.
Page 395 SYNC® System Settings System Settings provide access to your Bluetooth Devices and Advanced menu features. Use the arrow buttons to scroll through the menu options. The Bluetooth Devices menu allows you to add, connect, delete and set a phone as primary as well as turn your Bluetooth feature on and off. The Advanced menu allows you to access and set prompts, languages, defaults, perform a master reset, install an application and view system information.
Page 396 SYNC® If you select: You can: Set Bluetooth On/Off Turn the Bluetooth feature on and off. Press OK and scroll to toggle between On and Off. When the desired selection is chosen, press OK. Note: Turning Bluetooth off disconnects all Bluetooth devices and deactivates all Bluetooth features.
Page 397 SYNC® Advanced Menu Options This menu allows you to access settings such as prompts, languages, defaults, perform a master reset, install an application and view system information. 1. Press the phone button to enter the Phone Menu. 2. Scroll until System Settings appears and press OK. 3.
Page 398: 911 Assist
SYNC® If you select: You can: Master Reset Completely erase all information stored on SYNC (phonebook, call history, text messages and paired devices) and return to the factory default settings. Press OK to select. The display indicates when complete and SYNC takes you back to the Advanced menu.
Page 399 SYNC® WARNING: Do not wait for 911 Assist to make an emergency call if you can do it yourself. Dial emergency services immediately to avoid delayed response time which could increase the risk of serious injury or death after a crash. If you do not hear 911 Assist within five seconds of the crash, the system or phone may be damaged or non-functional.
Page 400 SYNC® Off selections include: Off with reminder and Off without reminder. Off with reminder provides a display and voice reminder at phone connection at vehicle start. Off without reminder provides a display reminder only without a voice reminder at phone connection. To make sure that 911 Assist works properly: •...
Page 401: Vehicle Health Report
SYNC® 911 Assist Privacy Notice Once 911 Assist is set on, it may disclose to emergency services that the vehicle has been in a crash involving the deployment of an airbag or activation of the fuel pump shut-off. Certain versions or updates to 911 Assist may also be capable of electronically or verbally disclosing to 911 operators the vehicle location, and/or other details about the vehicle or crash to assist 911 operators to provide the most appropriate emergency...
Page 402 Press OK for SYNC to run a health report of Run Report? your vehicle’s diagnostic systems and send the results to Ford where it is combined with scheduled maintenance information, open recalls and other field service actions and unserviced vehicle inspection items from your authorized dealer.
Page 403 For more information, see SYNC Services Terms and Conditions at www.SYNCMyRide.com. If you do not want Ford or its service providers to collect the vehicle travel information or other information identified in the Terms and Conditions, do not activate or use the service.
Page 404 SYNC® SYNC Services uses advanced vehicle sensors, integrated GPS technology and comprehensive map and traffic data, to give you personalized traffic reports, precise turn-by-turn directions, business search, news, sports, weather and more. For a complete list of services, or to learn more, please visit www.SYNCMyRide.com.
Page 405 SYNC® 2. Follow the voice prompts to select your destination. Once your destination is selected, your current vehicle location is uploaded and a route based on current traffic conditions is calculated and sent back to your vehicle. After the route download is complete, the phone call is automatically ended.
Page 406 SYNC® SYNC Services quick tips Portable Your subscription is associated with your Bluetooth-enabled cellular phone number, not your VIN (Vehicle Identification Number). You can pair and connect your phone to any vehicle equipped with Traffic, Directions and Information and continue enjoying your personalized services.
Page 407 SYNC® 5. Depending on how many digital media files are on your connected device, Indexing may appear in the radio display. When indexing is complete, the screen returns to the Play Menu. 6. Press OK and scroll through selections of: •...
Page 408 SYNC® “USB” “Play previous folder” “Play previous track” “Play song <name>” “Play track <name>” “Refine album <name>” “Refine artist <name>” “Refine song <name>” “Refine track <name>” “Repeat off” “Repeat on” “Search album <name>” “Search artist <name>” “Search genre <name>” “Search song <name>” “Search track <name>”...
Page 409 SYNC® Voice command guide “Autoplay” Turn on to listen to music which has already been randomly indexed during the indexing process. Turn off and the system does not begin to play any of your music until all media has all been indexed.
Page 410 SYNC® Press the voice icon and when prompted say “Bluetooth Audio” and then any of the following: “BLUETOOTH AUDIO” “(Phone) (Media) (Bluetooth) Connections” “Pause” “Play” “Play next track ” “Play previous track ” Media Menu Features The media menu allows you to select your media source, how to play your music (by artist, genre, shuffle, repeat, etc.), and also to add, connect or delete devices.
Page 411 SYNC® When you select: You can: SYNC USB: Press OK to access music Select Source plugged into your USB port. You can also plug in devices to charge them (if supported by your device). Once connected, the system indexes any readable media files. (The time required to complete this depends on the size of the media content being indexed.) If Autoplay is on, you can access media files...
Page 412 SYNC® When you select: You can: Media Settings Choose to shuffle or repeat your music and select your Autoplay settings. Once these selections are turned on, they remain on until turned off. Press SEEK to play the previous or next track. Note: Some digital media players require both USB and line in ports to stream data and music separately.
Page 413 SYNC® Accessing Your Play Menu This menu allows you to select and play your media by artist, album, genre, playlist, track, similar music or even to explore what is on your USB device. 1. Make sure that your device is plugged into the USB port and is turned on.
Page 414 SYNC® When you select: You can: Albums Sort all indexed media by albums. If there are less than 255 indexed albums, they are listed alphabetically in flat file mode. If there are more, they are organized into alphabetical categories. 1. Press OK to enter the album menu and select from playing all albums or from any individual indexed album.
Page 415 SYNC® When you select: You can: Explore USB Explore all supported digital media on your media device connected to the USB port. You can only view media content which is compatible with SYNC; other files saved are not visible. Press OK to select. Then scroll to explore indexed media on your flash drive.
Page 416 SYNC® Bluetooth Devices Menu Options This menu allows you to add, connect and delete devices as well as turn Bluetooth on and off. 1. Press AUX and then MENU to enter the Media Menu. 2. Scroll until System Settings appears and select OK. 3.
Page 417 SYNC® Advanced Menu Options This menu allows you to access settings such as prompts, language, performing a master reset as well as returning to factory defaults. 1. Press AUX and then MENU to access the Media Menu. 2. Scroll until System Settings appears and select OK. 3.
Page 418 SYNC® When you select: You can: Master Reset Completely erase all information stored on SYNC (all phonebook, call history, text messages and all paired devices) and return to the factory default settings. Application Download new software applications (if available) and then load the desired applications through your USB port.
Page 419 SYNC® Phone issues Issue Possible Possible solution(s) cause(s) • This is a • Go to the website to review SYNC is not able to download my phone-dependent your phone’s compatibility. • Try turning off the device, phonebook. feature, OR • Possible phone resetting the device or removing malfunction.
Page 420 SYNC® Phone issues Issue Possible Possible solution(s) cause(s) • This is a • Go to the website to review I am having trouble phone-dependent your phone’s compatibility. • Try turning off the device, connecting my feature, OR • Possible phone phone to SYNC.
Page 421 SYNC® USB and media issues Issue Possible Possible solution(s) cause(s) • Try turning off the device, I am having Possible device trouble malfunction. resetting the device or removing connecting my the device’s battery, then trying device. again. • Make sure you are using the manufacturer’s cable.
Page 422 SYNC® Vehicle Health Report and SYNC Services (Traffic, Directions and Information) issues Issue Possible Possible solution(s) cause(s) • Your account • This is a free feature, but you I received a text that the Vehicle may not be must first register online to use Health Report is activated on the •...
Page 423 SYNC® Voice command issues Issue Possible Possible solution(s) cause(s) • You may be • Review the Phone voice SYNC does not understand what using the wrong commands and the Media voice I am saying. voice commands, commands at the beginning of their respective sections.
Page 424 SYNC® Voice command issues Issue Possible Possible solution(s) cause(s) • You may be • Review the phone voice SYNC does not understand or is using the wrong commands at the beginning of calling the wrong voice commands, the phone section. •...
Page 425: Myford Touch® (If Equipped)
MyFord Touch® (If Equipped) INTRODUCTION WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle.
Page 426 MyFord Touch® (If Equipped) This system uses a four-corner strategy to provide quick access several vehicle features and settings. The touchscreen provides easy interaction with your cellular phone, multimedia, climate control and navigation system. The corners display any active modes within those menus, such as phone status or the climate temperature.
Page 427 MyFord Touch® (If Equipped) SETTINGS Press to select any of the following: • Clock • Display • Sound • Vehicle • Settings • Help HOME Press to access your home screen. Depending on your vehicle’s option package and software, your screens may vary in appearance from the descriptions in this section.
Page 428 MyFord Touch® (If Equipped) Using the Touch-sensitive Controls on Your System To turn a feature on and off, just touch the graphic with your finger. To get the best performance from the touch-sensitive controls: • Do not press hard on the controls. They are sensitive to light touch. •...
Page 429 MyFord Touch® (If Equipped) Support The SYNC support team is available to help you with any questions you cannot answer on your own. Monday-Saturday, 8:30am-9:00pm EST. Sunday, 10:30am-7:30pm EST. In the United States, call: 1–800–392–3673. In Canada, call: 1–800–565–3673. Times are subject to change due to holidays. Safety Information WARNING: Driving while distracted can result in loss of vehicle control, crash and injury.
Page 430 MyFord Touch® (If Equipped) Speed-restricted Features Some features of this system may be too difficult to use while your vehicle is moving so they are restricted from use unless your vehicle is stationary. • Screens that are too crowded with information, such as Point of Interest reviews and ratings, Sirius Travel Link sports scores, movie times and ski conditions.
Page 431 Master Reset to erase all stored information. System data cannot be accessed without special equipment and access to the vehicle’s SYNC module. Ford Motor Company and Ford of Canada do not access the system data for any purpose other than as described...
Page 432: Infotainment Display
MyFord Touch® (If Equipped) ACCESSING AND ADJUSTING MODES THROUGH YOUR RIGHT VEHICLE INFORMATION DISPLAY (IF EQUIPPED) 100 120 180 200 20 0 km/h The display is located on the right side of your instrument cluster. You can use your steering wheel controls to view and make minor adjustments to active modes without taking your hands off the wheel.
Page 433: Voice Recognition
MyFord Touch® (If Equipped) Phone Navigation Climate You can make selections from the menu by using the OK button. The selection menu expands and different options appear. • Press the up and down arrows to scroll through the modes. • Press the right arrow to enter the mode. •...
Page 434 MyFord Touch® (If Equipped) How to Use Voice Commands with Your System Press the voice icon. After the tone, speak your command clearly. These commands can be said at any time. “Cancel” “Exit” “Go back” “List of commands” “Main menu” “Next page”...
Page 435 MyFord Touch® (If Equipped) • If you use the steering wheel control, press the voice icon. After the tone, speak your command clearly. Voice command list “Audio list of commands” “Bluetooth audio list of commands” “Browse list of commands” “CD list of commands” “Climate control list of commands”...
Page 436 MyFord Touch® (If Equipped) Phone/Media Candidate Lists: Candidate lists are lists of possible results from your voice commands. The system creates these lists when it has the same confidence level of several options based on your voice command. To access these settings using the touchscreen: 1.
Page 437 MyFord Touch® (If Equipped) For example, you can choose from the following on the Navigation home screen: • My Home • Favorites • Previous Destinations • Point of Interest (POI) • Emergency • Street Address • Intersection • Cancel Route. Some of the voice commands that are available while viewing this screen are: “DESTINATION”...
Page 438 MyFord Touch® (If Equipped) If you choose Points of Interest from the navigation screen, you can choose from the following: • Search Area • Search By Name • Fuel Station • ATM • All Restaurants • Accommodations • Parking. Some of the voice commands that are available while viewing this screen are: “POINTS OF INTEREST”...
Page 439: Listening To Music
MyFord Touch® (If Equipped) The dual mode feature is also available when the voice system displays a list of items to pick from during a voice session, where you would be able to touch the line item or say “Line 2”. If the system does not understand a voice command, or there are multiple options, the system displays a voice command list for you.
Page 440 MyFord Touch® (If Equipped) Browsing Device Content When listening to audio on a device, you can browse through other devices without having to change sources. For example, if you are currently listening to audio on an SD card, you can browse all the artists that are stored on your USB device.
Page 441 MyFord Touch® (If Equipped) Your voice system allows you to change audio sources with a simple voice command. For example, if you are listening to music on a USB device, then want to switch to a satellite radio channel, simply press the voice button on the steering wheel controls and say the name of the Sirius station (such as, “the Highway”).
Page 442 MyFord Touch® (If Equipped) Scan Touch this button to go to the next strong AM or FM radio station. The light on the button illuminates when the feature is on. Options Sound Settings allows you to adjust settings for: • Bass •...
Page 443 MyFord Touch® (If Equipped) HD Radio™ Information (If Available) Note: HD Radio broadcasts are not available in all markets. HD Radio technology is the digital evolution of analog AM/FM radio. Your system has a special receiver that allows it to receive digital broadcasts (where available) in addition to the analog broadcasts, it already receives.
Page 444 MyFord Touch® (If Equipped) • Memory presets allow you to save an active channel as a memory preset. Touch and hold a memory preset slot until the sound returns. There is a brief mute while the radio saves the station. Sound returns when finished.
Page 445 HD Radio Technology manufactured under license from iBiquity Digital Corp. U.S. and foreign patents. HD Radio and the HD and HD Radio logos are proprietary trademarks of iBiquity Digital Corp. Ford Motor Company and iBiquity Digital Corp. are not responsible for the content sent using HD Radio technology.
Page 446 MyFord Touch® (If Equipped) Radio Voice Commands If you are listening to the radio, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not listening to the radio, press the voice button and, after the tone, say “Radio”, then any of the commands in the following chart.
Page 447 MyFord Touch® (If Equipped) Sirius Satellite Radio (If Activated) Press the lower left corner of the touchscreen, then select the SIRIUS tab. Presets Save a channel by pressing and holding one of the memory preset areas. There is a brief mute while the radio saves the channel. Sound returns when finished.
Page 448 Note: Sirius does not support the Alert feature on all channels. Ford Motor Company shall not be responsible for Alert feature variation. Electronic Serial Number (ESN) is required when you need to activate, modify or track your satellite radio account.
Page 449 MyFord Touch® (If Equipped) “SIRIUS” “Sirius <0–223>” “SAT 3” “<Channel name>” “SAT 3 preset <#>” “Preset <#>” “SAT preset <#>” “SAT” “Sirius off” “SAT 1” “Sirius on” “SAT 1 preset <#>” “Sports game” “SAT 2” “Tune” “SAT 2 preset <#>” “Help”...
Page 450 Note: Sirius reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particular channels, and its prices, at any time, with or without notice to you. Ford Motor Company shall not be responsible for any such programming changes.
Page 451 MyFord Touch® (If Equipped) Sirius troubleshooting tips Radio display Condition Possible action Acquiring... Radio requires more No action required. than two seconds to This message should produce audio for the disappear shortly. selected channel. Sat Fault/SIRIUS There is an internal If this message does system failure.
Page 452 MyFord Touch® (If Equipped) Sirius troubleshooting tips Radio display Condition Possible action None Found. Check All the channels in the Use the channel guide Channel Guide. selected channels are to turn off the Lock either skipped or or Skip function on locked.
Page 453 MyFord Touch® (If Equipped) Compression allows you to turn the compression feature on and off. Browse Touch this button to look through all available CD tracks. CD Voice Commands If you are listening to a CD, press the voice button on the steering wheel control.
Page 454 MyFord Touch® (If Equipped) SD logo is a trademark of SD-3C, LLC. USB Port The ports are located either in the center console or behind a small access door in the instrument panel. To access and play music from your device, press the lower left corner of the touchscreen, and then select the USB tab.
Page 455 MyFord Touch® (If Equipped) • Occupancy Mode • Speed Compensated Volume. Note: Your vehicle may not have all these sound settings. • Media Player Settings allows you to select more settings, which is under Media Player. See Settings. • Device Information displays software and firmware information about the currently connected media device.
Page 456 MyFord Touch® (If Equipped) “USB” or “SD CARD” “Play folder <name>” “Repeat all” “Play genre <name>” “Repeat off” “Play movie <name>” “Repeat one” “Play music video <name>” “Shuffle” “Play next song” “Shuffle off” “Play playlist <name>” “What’s this?” “Play podcast <name>” “Help”...
Page 457 MyFord Touch® (If Equipped) Supported Media Players, Formats and Metadata Information SYNC is capable of hosting nearly any digital media player, including iPod®, Zune™, plays from device players, and most USB drives. Supported audio formats include MP3, WMA, WAV and AAC. It is also able to organize your indexed media from your playing device by metadata tags.
Page 458 MyFord Touch® (If Equipped) WARNING: For safety reasons, do not connect or adjust the settings on your portable music player while your vehicle is moving. WARNING: Store the portable music player in a secure location, such as the center console or the glove box, when your vehicle is in motion.
Page 459 MyFord Touch® (If Equipped) 5. Turn the portable music player on and adjust the volume to ⁄ maximum. 6. Press the lower left corner on the touchscreen. Select the A/V In tab. (You should hear audio from your portable music player although it may be low.) 7.
Page 460: Phone Features
MyFord Touch® (If Equipped) PHONE A. Phone B. Quick Dial C. Phonebook D. History E. Messaging F. Settings Hands-free calling is one of the main features of SYNC. Once you pair your phone, you can access many options using the touchscreen or voice commands.
Page 461 MyFord Touch® (If Equipped) Other features, such as text messaging using Bluetooth and automatic phonebook download, are phone-dependent features. To check your phone’s compatibility, see your phone’s user manual and visit www.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca. Pairing Your Phone for the First Time WARNING: Driving while distracted can result in loss of vehicle control, crash and injury.
Page 462 MyFord Touch® (If Equipped) Pairing Subsequent Phones Note: Put the transmission in position P. Turn on your vehicle ignition and the radio. 1. Press the Phone corner of the touchscreen > Settings > BT Devices > Add Device. 2. Make sure that Bluetooth is set to On and that your cellular phone is in the proper mode.
Page 463 MyFord Touch® (If Equipped) Phone Menu Options Press the top left corner on your touchscreen to select from the following options: Phone Touch this button to access the on-screen numerical pad to enter a number and place a call. During an active call, you can also choose to: •...
Page 464 MyFord Touch® (If Equipped) Text Messaging Note: Downloading and sending text messages using Bluetooth are phone-dependent features. Note: Certain features in text messaging are speed-dependent and not available when your vehicle is traveling at speeds over 3 mph (5 km/h). Note: SYNC does not download read text messages from your phone.
Page 465 MyFord Touch® (If Equipped) You can then preview the message, verify the recipient as well as update the message list. Pre-defined text message options I’ll call you back in a few minutes. I just left, I’ll be there soon. Can you give me a call? I’m on my way.
Page 466 MyFord Touch® (If Equipped) Bluetooth Touch this tab to turn Bluetooth off or on. Do Not Disturb Touch this tab if you want all calls to go directly to your voice mail and not ring in the vehicle. When this feature is on, text message notifications do not ring inside the cabin either.
Page 467 MyFord Touch® (If Equipped) Phone Voice Commands Press the voice button on the steering wheel control. After the tone, say any of the following commands: “PHONE” “Bluetooth off” “Hold call off” “Bluetooth on” “Hold on” “Call” “Join calls” “Call <name>” “Listen to text message <#>”...
Page 468: Information Menu
MyFord Touch® (If Equipped) INFORMATION If your vehicle is equipped with Navigation, touch the i (Information) button to access these features. If your vehicle is not equipped with Navigation, touch the corner of the touchscreen with the green tab. Under the Information menu, you can access features, such as: A.
Page 469 For more information, see SYNC Services Terms and Conditions at www.SYNCMyRide.com. If you do not want Ford or its service providers to collect your vehicle travel information or other information identified in the Terms and Conditions, do not subscribe or use the service.
Page 470 MyFord Touch® (If Equipped) Connecting to SYNC Services Using the Touchscreen If your vehicle is equipped with Navigation, touch the i (Information) button to access these features. If your vehicle is not equipped with Navigation, touch the corner of the touchscreen with the green tab.
Page 471 MyFord Touch® (If Equipped) If your vehicle is equipped with Navigation, SYNC Services downloads your requested destination to the navigation system. The navigation system then calculates the route and provides driving instructions. See the Navigation system section for more information. Disconnecting from SYNC Services 1.
Page 472 Sirius Travel Link. Note: Neither Sirius nor Ford is responsible for any errors or inaccuracies in the Sirius Travel Link services or its use in vehicles. When you subscribe to Sirius Travel Link, it can help you locate the best...
Page 473 MyFord Touch® (If Equipped) If your vehicle is equipped with Navigation, touch the i (Information) button to access these features. If your vehicle is not equipped with Navigation, touch the corner of the touchscreen with the green tab. Traffic On Route and Traffic Nearby Touch these buttons to identify traffic incidents on your route, nearby your vehicle’s current location or near any of your favorite places, if programmed.
Page 474 MyFord Touch® (If Equipped) Sirius Travel Link Voice Commands Note: In order to use Sirius Travel Link, your vehicle must be equipped with navigation and your navigation SD card must be in the SD card slot. Press the voice button on the steering wheel controls and, when prompted, say any of the following: Travel Link voice commands “5–day weather forecast”...
Page 475 MyFord Touch® (If Equipped) “TRAVEL LINK” “College basketball “Motor sports order” “NHL schedule” schedule” “College basketball “Motor sports “NHL scores” scores” schedule” “College football “Movie listings” “Traffic” headlines” “College football “My team headlines” “Weather” schedule” “College football “My teams schedule” “Weather map”...
Page 476 MyFord Touch® (If Equipped) 911 Assist® (If Equipped) WARNING: Unless the 911 Assist setting is set on before a crash, the system will not dial for help, which could delay response time, potentially increasing the risk of serious injury or death after a crash.
Page 477 MyFord Touch® (If Equipped) Setting 911 Assist On If your vehicle is equipped with Navigation, touch the i (Information) button to access these features. If your vehicle is not equipped with Navigation, touch the corner of the touchscreen with the green tab. Press Apps >...
Page 478 MyFord Touch® (If Equipped) If you do not cancel the call, and SYNC makes a successful call, a pre-recorded message plays for the 911 operator, and then the occupant(s) in your vehicle is able to talk with the operator. Be prepared to provide your name, phone number and location immediately, because not all 911 systems are capable of receiving this information electronically.
Page 479 “Vehicle health report”. Vehicle Health Report Privacy Notice When you create a Vehicle Health Report, Ford Motor Company may collect your cellular phone number (to process your report request) and diagnostic information about your vehicle. Certain versions or updates to Vehicle Health Report may also collect more vehicle information.
Page 480: Settings
MyFord Touch® (If Equipped) SETTINGS A. Clock B. Display C. Sound D. Vehicle E. Settings F. Help Under this menu, you can set your clock, access and adjust the display, sound and vehicle settings as well as access settings for specific modes or the help feature.
Page 481 MyFord Touch® (If Equipped) From this screen, you can also make other adjustments, such as 12– or 24–hour mode, activate GPS time synchronization and have the system automatically update for daylight savings time and new time zones. You can also turn the outside air temperature display on and off. It appears at the top center of the touchscreen, next to the time and date.
Page 482 MyFord Touch® (If Equipped) To access, press the Settings icon > Display > Edit Wallpaper, and then follow the system prompts to upload your photographs. Only the photograph(s), which meets the following conditions, display: • Compatible file formats are as follows: .jpg, .gif, .png, .bmp. •...
Page 483 MyFord Touch® (If Equipped) Ambient Lighting (If Equipped) When activated, ambient lighting illuminates footwells and cupholders with a choice of colors. To access and make adjustments: 1. Press the Settings icon > Vehicle > Ambient Lighting. 2. Touch the desired color. 3.
Page 484 MyFord Touch® (If Equipped) System Press the Settings icon > Settings > System, then select from the following: System Language Select to have the touchscreen display in English, Spanish or French. Distance Select to display units in kilometers or miles. Temperature Select to display units in Celsius or Fahrenheit.
Page 485 MyFord Touch® (If Equipped) Voice Control Press the Settings icon > Settings > Voice Control, then select from the following: Voice control Interaction Mode Standard interaction mode provides more detailed interaction and guidance. Advanced mode has less audible interaction and more tone prompts.
Page 486 MyFord Touch® (If Equipped) Media Player Press the Settings icon > Settings > Media Player, then select from the following: Media player Autoplay When this feature is on, the system automatically switches to the media source upon initial connection. This allows you to listen to music during the indexing process.
Page 487 MyFord Touch® (If Equipped) Navigation Press the Settings icon > Settings > Navigation, then select from the following: Navigation Map Preferences Turn breadcrumbs on and off. Have the system display your turn list top to bottom or bottom to top. Turn the Parking POI notification on and off.
Page 488 MyFord Touch® (If Equipped) Phone Settings Press the Settings icon > Settings > Phone, then select from the following: Phone Bluetooth Devices Connect, disconnect, add or delete a device, as well as save it as a favorite. Bluetooth Turn Bluetooth on and off. Do Not Disturb Have all calls go directly to your voice mail and not ring inside your vehicle.
Page 489 MyFord Touch® (If Equipped) Wireless & Internet Your system has a Wi-Fi feature that creates a wireless network within your vehicle, thereby allowing other devices (such as personal computers or phones) in your vehicle to speak to each other, share files or play games.
Page 490 MyFord Touch® (If Equipped) Wireless & Internet USB Mobile Instead of using Wi-Fi, your system can also Broadband use a USB mobile broadband connection to access the internet. (You must turn on your mobile broadband device on your personal computer before connecting it to the system.) This screen allows you to set up what is your typical area for your USB mobile broadband connection.
Page 491 MyFord Touch® (If Equipped) Help Press the Settings icon > Help, then select from the following: Help Where Am I? View your vehicle’s current location, if your vehicle is equipped with navigation. If your vehicle is not equipped with navigation, nothing displays.
Page 492: Climate Features
MyFord Touch® (If Equipped) To access Help using the voice commands, press the voice button, then, after the tone, say “Help”. The system provides allowable voice commands for the current mode. CLIMATE Press the lower right corner on the touchscreen to access your climate control features.
Page 493 MyFord Touch® (If Equipped) • Touch Rear Control to allow the rear seat passengers to adjust the rear climate settings. Touch it again to prevent the rear seat passengers from adjusting the settings. Rear Control automatically turns off when you use the touchscreen to adjust the rear climate settings.
Page 494 MyFord Touch® (If Equipped) K. Manual controls: Select any of the following airflow distribution modes: • Floor and Defrost: Distributes air through the windshield defroster vents, demister vents, floor vents and rear seat floor vents, and provides outside air to reduce window fogging. •...
Page 495: Navigation System
MyFord Touch® (If Equipped) There are additional climate control commands but in order to access them, you have to say “Climate” first, then when the system is ready to listen, you may say any of the following commands: Additional climate control voice commands “Automatic”...
Page 496 MyFord Touch® (If Equipped) Your navigation system is comprised of two main features, destination mode and map mode. To set a destination, press the green corner of your touchscreen, then Dest when it appears. See Setting a destination later in this chapter. To view the navigation map and your vehicle’s current location, touch the green bar in the upper right hand corner of the touchscreen, or, press Dest >...
Page 497 MyFord Touch® (If Equipped) high-occupancy vehicle lanes. (High-occupancy vehicle lanes are also known as carpool or diamond lanes. People who ride in buses, vanpools or carpools use these lanes.) Note: If your vehicle is on a recognized road and you do not press the Start Route button, the system defaults to the Fastest Route option and begins guidance.
Page 498 MyFord Touch® (If Equipped) When programming a point of interest destination, the system allows you to sort the resulting lists alphabetically, by distance or by cityseekr listings (if available). cityseekr (If Available) Note: cityseekr point of interest information is limited to approximately 154 cities (132 in the United States, 13 in Canada and 9 in Mexico).
Page 499 MyFord Touch® (If Equipped) Nightlife Attraction This icon appears when your selection exists in multiple categories within the system. When you are viewing more information for hotels, cityseekr also tells you if the hotel has certain services and facilities using icons. Hotel services and facilities Restaurant 24 Hr Room Service...
Page 500 MyFord Touch® (If Equipped) For hotels, cityseekr can provide information, such as star rating, price category, review, check-in and check-out times, hotel service icons and website address. Setting Your Navigation Preferences Select settings for the system to take into account when planning your route.
Page 501 MyFord Touch® (If Equipped) When you select: You can: Traffic Preferences Choose how you want the system to handle traffic problems along your route. Automatic: Have the system reroute you to avoid traffic incidents that develop and impact the current route (no notification is provided).
Page 502 MyFord Touch® (If Equipped) Change the appearance of the map display by repeatedly pressing the arrow button in the upper left corner of the screen. It toggles between three different map modes: Heading up, North up, and 3D. Heading up (2D map) always shows the direction of forward travel to be upward on the screen.
Page 503 MyFord Touch® (If Equipped) In 3D mode, rotate the map view by swiping your finger across the shaded bar with the arrows. Map Icons Vehicle mark shows the current location of your vehicle. It stays in the center of the map display, except when in scroll mode.
Page 504 Annual navigation map updates are available for purchase through your dealership, by calling 1-800-NAVMAPS (in Mexico, call 01–800–557–5539) or going to www.navigation.com/ford. You need to specify the make and model of your vehicle to determine if there is an update available.
Page 505 MyFord Touch® (If Equipped) Navigation Voice Commands When in navigation mode, press the voice button on the steering wheel control. After the tone, say any of the following commands: Navigation system voice commands “Cancel next waypoint” “Navigation” “Cancel route” “Navigation voice volume decrease”...
Page 506 MyFord Touch® (If Equipped) “DESTINATION” “Intersection” “Nearest <POI category>” “Nearest POI” “Play nametags” “POI category” “Previous destination” “Street address” “Help” “NAVIGATION” “Destination” “Zoom city” “Zoom country” “Zoom in minimum” “Zoom out maximum” “Zoom province” “Zoom state” “Zoom street” “Zoom to <distance>” “Help”...
Page 507: Appendices
SYNC® End User License Agreement (EULA) • You have acquired a device (“DEVICE”) that includes software licensed by Ford Motor Company and its affiliates (“FORD MOTOR COMPANY”) from an affiliate of Microsoft Corporation (“MS”). Those installed software products of MS origin, as well as associated media, printed materials, and “online”...
Page 508 Neither FORD MOTOR COMPANY nor its suppliers shall be liable for any damages arising out of errors in the speech recognition process.
Page 509 • Consent to Use of Data: You agree that MS, Microsoft Corporation, FORD MOTOR COMPANY, third party software and systems suppliers, their affiliates and/or their designated agent may collect and use technical information gathered in any manner as part of product support services related to the SOFTWARE or related services.
Page 510 DEVICE. UPGRADES AND RECOVERY MEDIA: If the SOFTWARE is provided by FORD MOTOR COMPANY separate from the DEVICE on media such as a ROM chip, CD ROM disk(s) or via web download or other means, and is labeled “For Upgrade Purposes Only” or For Recovery Purposes...
Page 511 For additional information, see http://www.microsoft.com/exporting/. TRADEMARKS: This EULA does not grant you any rights in connection with any trademarks or service marks of FORD MOTOR COMPANY, MS, Microsoft Corporation, third party software or service providers, their affiliates or suppliers.
Page 512 End user notice Microsoft® Windows® Mobile for Automotive Important Safety Information This system Ford SYNC™ contains software that is licensed to Manufacturer FORD MOTOR COMPANY by an affiliate of Microsoft Corporation pursuant to a license agreement. Any removal, reproduction, reverse engineering or other unauthorized use of the software from this system in violation of the license agreement is strictly prohibited and may subject you to legal action.
Page 513 Appendices Keep User’s Guide in Vehicle When kept in the vehicle, the User’s Guide will be a ready reference for you and other users unfamiliar with the Windows Automotive-based system. Please make certain that before using the system for the first time, all persons have access to the User’s Guide and read its instructions and safety information carefully.
Page 514 Appendices Navigation Features Any navigation features included in the system are intended to provide turn by turn instructions to get you to a desired destination. Please make certain all persons using this system carefully read and follow instructions and safety information fully. Distraction Hazard Any navigation features may require manual (non-verbal) setup.
Page 515 Appendices TeleNav Software End User License Agreement Please read these terms and conditions carefully before you use the TeleNav Software. Your use of the TeleNav Software indicates that you accept these terms and conditions. If you do not accept these terms and conditions, do not break the seal of the package, launch, or otherwise use the TeleNav Software.
Page 516 Appendices transfer of the TeleNav Software license), without the right to sublicense, to use the TeleNav Software (in object code form only) in order to access and use the TeleNav Software. This license shall terminate upon any termination or expiration of this Agreement. You agree that you will use the TeleNav Software only for your personal business or leisure purposes, and not to provide commercial navigation services to other parties.
Page 517 Appendices TELENAV EXPRESSLY DISCLAIMS AND EXCLUDES ALL WARRANTIES IN CONNECTION WITH THE TELENAV SOFTWARE, WHETHER STATUTORY, EXPRESS OR IMPLIED, INCLUDING ALL WARRANTIES WHICH MAY ARISE FROM COURSE OF DEALING, CUSTOM OR TRADE AND INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS WITH RESPECT TO THE TELENAV SOFTWARE.
Page 518 Appendices parties. You expressly agree to waive your right to a jury trial. This Agreement and performance hereunder will be governed by and construed in accordance with the laws of the State of California, without giving effect to its conflict of laws provisions. To the extent judicial action is necessary in connection with the binding arbitration, both TeleNav and you agree to submit to the exclusive jurisdiction of the courts of the County of Santa Clara, California.
Page 519 Appendices 8.4 TeleNav’s or your failure to require performance of any provision shall not affect that party’s right to require performance at any time thereafter, nor shall a waiver of any breach or default of this Agreement constitute a waiver of any subsequent breach or default or a waiver of the provision itself.
Page 520 Appendices The Data for areas of Canada includes information taken with permission from Canadian authorities, including: Her Majesty the Queen in Right of Canada, Queen’s Printer for Ontario, Canada Post Corporation, GeoBase ®. NT holds a nonexclusive license from the United States Postal Service ® to publish and sell ZIP+4 ®...
Page 521 Appendices WARNING: This Data may contain inaccurate or incomplete information due to the passage of time, changing circumstances, sources used and the nature of collecting comprehensive geographic Data, any of which may lead to incorrect results. No Warranty: This Data is provided to you “as is”, and you agree to use it at your own risk.
Page 522 Appendices Export Control: You agree not to export from anywhere any part of the Data or any direct product thereof except in compliance with, and with all licenses and approvals required under, applicable export laws, rules and regulations, including but not limited to the laws, rules and regulations administered by the Office of Foreign Assets Control of the U.S.
Page 523 Appendices NOTICE OF USE 425 West Randolph Street, Chicago, IL 60606. This Data is a commercial item as defined in FAR 2.101 and is subject to the EndUser License Agreement under which this Data was provided. 2011 NAVTEQ. All rights reserved. If the Contracting Officer, federal government agency, or any federal official refuses to use the legend provided herein, the Contracting Officer, federal government agency, or any federal official must notify...
Page 524 Appendices You agree that you will use the content from Gracenote (“Gracenote Content”), Gracenote Data, the Gracenote Software, and Gracenote Servers for your own personal, non-commercial use only. You agree not to assign, copy, transfer or transmit the Gracenote Content, Gracenote Software or any Gracenote Data (except in a Tag associated with a music file) to any third party.
Page 525 Appendices NOT OBLIGATED TO PROVIDE YOU WITH ANY ENHANCED OR ADDITIONAL DATA TYPES THAT GRACENOTE MAY CHOOSE TO PROVIDE IN THE FUTURE AND IS FREE TO DISCONTINUE ITS ONLINE SERVICES AT ANY TIME. GRACENOTE DISCLAIM ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NON-INFRINGEMENT.
Page 526: Index
Index 911 Assist™ ......397, 475 All Wheel Drive (AWD), driving off road ......199 Ambient mood/lighting .....482 AM/FM ........440 ABS (see Brakes) .....206 Antifreeze Accessing and using your USB (see Engine coolant) ....288 port ..........452 Anti-lock brake system Accessing call history/phone (see Brakes) ......206 book during active call .....386 Anti-theft system ....81, 84...
Page 527 CD player ......131, 451 Cruise control ......217 CD voice commands ....452 Customer Assistance ....260 Cell phone use ......15 Ford Extended Service Plan ..........357 Changing a tire ......339 Getting roadside assistance ...260 Child safety restraints ..27, 29 Getting the service you Child safety seats need .........265...
Page 528 Index Dipstick specifications ......347 automatic transmission Event data recording ....12 fluid ........293, 295 Exhaust fumes ......180 engine oil .........287 Display settings ......480 Driving under special conditions ....197, 200, 203 Fail safe cooling ......291 sand .........201 Fleet MyKey programming ..64 snow and ice ......204 Floor mats .........258 through water ....202, 257 Fluid capacities ......347...
Page 529 Index odometer .........114 positioning .......339 trip odometer ......114 storage ........339 Joining two calls (multiparty/conference call) ..386 Jump-starting your vehicle ..262 Hazard flashers ......261 HD Radio™ .......442 Headlamps aiming ........301 Keyless entry system autolamp system .......92 autolock ........74 bulb specifications ....307 keypad ........79 flash to pass ......91 locking and unlocking doors ..80...
Page 530 Index MAP DVD - Loading and Parking brake ......207 Unloading ........461 Parts Map icons ........502 (see Motorcraft® parts) ..351 Map mode ........500 Passenger Occupant Map preferences .......499 Classification Sensor ....47 Map updates ......503 Phone Bluetooth menu options Media Bluetooth menu options (adding, connecting, deleting, (adding, connecting, deleting, turning on/off) ......394...
Page 531 Index Belt-Minder®, deactivating/activating .....40 extension assembly ....37 Radio ......133, 137, 139 AM/FM ........440 for adults ......34–35 Single CD ....133, 137, 139 for children ......19, 24 Occupant Classification Radio reception ......131 Sensor ........47 Radio voice commands .....445 safety belt maintenance ...41 Rear view camera seat belt maintenance ....41 display ........212, 482...
Page 532 Index Setting a destination by voice ...........495 Temperature control Settings ........479 (see Climate control) ..146–147, 150, 152, 491 Setting the clock ....133, 479 Text messaging ....389, 463 Side air curtain ......52 Text messaging (sending, Side-curtain airbags system ..52 downloading, deleting) ..390, 392 SIRIUS®...
Page 533 Index fluid, checking and adding Voice commands in phone (automatic) .....293, 295 mode ..........383 fluid, refill capacities ....347 Voice recognition ......432 lubricant specifications ..347 Turn signal ........94 Warning lights (see Lights) ..104 Washer fluid ......296–297 USB port ....141–142, 452 Water, Driving through .....257 Using privacy mode ....386 Windows power .........96...

Ford EDGE 2013 Owner's Manual

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Introduction

Child Safety

Safety Belts

Personal Safety System

Supplementary Restraints System

Keys and Remote Control

Mykey

Locks

Security

Steering Wheel

Wipers and Washers

Lighting

Windows and Mirrors

Instrument Cluster

Information Displays Controls

Audio System

Climate Control

Seats

Universal Garage Door Opener (if Equipped) 169

Auxiliary Power Points

Storage Compartments

Starting and Stopping the Engine

Fuel and Refueling

Transmission

All-Wheel Drive (if Equipped)

Brakes

Traction Control

Stability Control Advancetrac

Parking Aids

Cruise Control

Driving Aids

Load Carrying

Towing

Driving Hints

Roadside Emergencies

Customer Assistance

Fuses

Maintenance

Vehicle Care

Wheels and Tires

Capacities and Specifications

Accessories

Ford Extended Service Plan

Scheduled Maintenance

Sync

Myford Touch® (if Equipped)

Appendices

Index

Quick Links

Related Manuals for Ford EDGE 2013

Summary of Contents for Ford EDGE 2013