Ford ENDURA 2017 Owner's Manual page 206

2. Insert the key and turn it clockwise to
lock the handwheel.
3. Fit the protective cap. Fully push it back
over the lock.
4. Turn the trailer wiring connection
socket downward through 90° until it
engages in the end position.
E71331
Check the following:
• The green mark on the handwheel is
aligned with the white dot on the tow
ball arm.
• The handwheel (A) is locked.
• You have removed the key (B).
Note: If any of these cannot be met, do not
use the tow ball arm. Have your vehicle
checked as soon as possible.
Quickly Detaching the Tow Ball
Arm
Never unlock or detach the tow ball arm
with a trailer attached.
Endura (CDQ) New Zealand, enNZL, Edition date: 201712, First Printing
Towing
A
B
E71332
1. Remove the protective cap. Insert the
key and turn it counterclockwise to
unlock the handwheel.
2. Hold the tow ball arm. Pull the
handwheel outward and turn it
clockwise against the stop.
3. Pull the tow ball arm downward to
remove it.
4. Release the handwheel.
5. Insert the blanking plug.
Quickly Attaching the Tow Ball Arm
When the tow ball arm is quickly detached,
it can be quickly reattached.
1. Remove the blanking plug and fully
insert the tow ball arm until it engages.
Note: Do not place your hand near the
handwheel.
Note: The green mark on the handwheel
must align with the white dot on the tow
ball arm.
203
3
2
1