Ford ENDURA 2017 Owner's Manual page 254

• Use commercial car washing
equipment.
• Use snow chains on the end of the
vehicle with the dissimilar spare wheel
and tire assembly.
The usage of a full-size dissimilar spare
wheel and tire assembly can lead to
impairment of the following:
• Handling, stability and braking
performance.
• Comfort and noise.
• Ground clearance and parking at curbs.
• Winter weather driving capability.
• Wet weather driving capability.
• All-wheel driving capability.
When driving with the full-size dissimilar
spare wheel and tire assembly additional
caution should be given to:
• Towing a trailer.
• Driving vehicles equipped with a
camper body.
• Driving vehicles with a load on the
cargo rack.
Drive cautiously when using a full-size
dissimilar spare wheel and tire assembly
and seek service as soon as possible.
Vehicle Jack
WARNINGS
Ensure screwthread is adequately
lubricated before use.
The jack should be used on level firm
ground wherever possible.
Switch the ignition off and apply the
park brake fully before lifting vehicle.
It is recommended that the wheels
of the vehicle be chocked, and that
no person should remain in a vehicle
that is being jacked.
Endura (CDQ) New Zealand, enNZL, Edition date: 201712, First Printing
Wheels and Tires
E166722
than when you are changing a wheel in an
emergency.
Tire Change Procedure
transmission, shift into park (P).
251
WARNINGS
No person should place any portion
of their body under a vehicle that is
supported by a jack.
Do not get under a vehicle that is
supported by a jack.
WARNING
The jack supplied with this vehicle is
only intended for changing wheels.
Do not use the vehicle jack other
WARNINGS
Park your vehicle in such a position
that neither the traffic nor you are
hindered or endangered.
Make sure that the wheels are
pointing straight ahead.
If your vehicle has a manual
transmission, shift into first or reverse
gear. If your vehicle has an automatic
Secure the diagonally opposite
wheel with an appropriate block or
wheel chock.
Make sure that the vehicle jack is
vertical to the jacking point and the
base is flat on the ground.