Ford ENDURA 2017 Owner's Manual page 256

12. Lower the wheel by turning the jack
handle counterclockwise.
3
5
E75442
13. Remove the jack and fully tighten the
lug nuts in the order shown. See
Technical Specifications (page
254).
14. Fold up the wrench/jack handle and
re-attach to the jack. Re-position
jack/wrench assembly into the
original vehicle position and secure
with the plastic wing nut. Make sure
the jack is fastened securely before
you drive.
15. Unblock the wheel.
Stowing the Flat Tire
You cannot store the full-sized road wheel
in the temporary spare tire well.
Endura (CDQ) New Zealand, enNZL, Edition date: 201712, First Printing
Wheels and Tires
1
4
2
1. Find the flat tire retainer strap tucked
inside the jack channel. Lower the
carpeted load floor.
2. Stow the flat tire in the cargo area on
the load floor with the wheel facing up.
Secure the flat tire with the retainer
strap by following the next steps.
E142906
3. Locate the rear left side and right side
cargo tie-down rings. Push the loop end
of the retainer strap through one cargo
tie-down ring. Thread the non-loop end
through the loop.
4. Weave the retainer strap through the
wheel openings.
5. Locate the cargo tie-down in the
opposite rear corner of the cargo area.
Thread the retainer strap though the
tie-down and pull tight.
6. Secure the flat tire by tying a 2-half
hitch knot.
253