Ford ENDURA 2017 Owner's Manual page 67

Fold-Away Exterior Mirrors
Push the mirror toward the door window
glass. Make sure that you fully engage the
mirror in its support when returning it to its
original position.
Power-Folding Mirrors
E195334
To fold both mirrors, make sure you switch
your vehicle on (with the ignition in
accessory mode or the engine running) and
then:
1. Press the control to fold the mirrors.
2. Press the control again to unfold.
Note: Once you press the control, you
cannot stop the mirrors midway through
their movement. Wait until the mirrors stop
moving and press the control again.
Auto-Folding Mirrors
Note: The auto-fold mirrors operate only if
they are in an unfolded position. If you
folded the mirrors using the power-folding
control, then you must unfold the mirrors
using the power-folding control so the
auto-fold feature can work.
The mirrors fold automatically when you
lock the vehicle. The mirrors unfold when
you unlock the vehicle.
You can switch this feature on or off using
the vehicle settings menu in the
information display.
Endura (CDQ) New Zealand, enNZL, Edition date: 201712, First Printing
Windows and Mirrors
(If Equipped)
(If Equipped)
64
Loose Mirror
If your power-folding mirrors are manually
folded, they may not work properly even
after you re-position them. You need to
reset them if they:
• Vibrate while driving or feel loose.
• Do not stay in the folded or unfolded
position.
To reset the power-fold feature:
1. Use the power-folding mirror control
to fold and unfold the mirrors.
2. When you hear one or both of the
mirrors make a loud noise, it means
that you reset the mirrors successfully.
This noise is normal.
3. Repeat this process each time the
mirrors are manually folded.
Even though the power-folding mirrors
typically operate electronically, you can
still fold and unfold them manually. After
any manual adjustment, however, the
power-folding mirrors become
unsynchronized, even after repositioning
them.
An unsynchronized mirror may:
• Not fold or unfold normally.
• Not stay in its set position.
• Feel loose or even vibrate at normal
driving speeds.
You can reset the mirrors by doing the
following:
1. Use the power-folding mirror control
to fold and unfold the mirrors.
2. When you hear one or both of the
mirrors make a loud noise, it means
that you reset the mirrors successfully.
This noise is normal.
3. Repeat this process each time the
power-folding mirrors fold or unfold
manually.