Adjusting The Headlamps - Rhd - Ford ENDURA 2017 Owner's Manual

Note: To see a clearer light pattern while
adjusting one headlamp, block the light
from the other headlamp.
8. Close the hood and switch the low
beam headlamps off.
Horizontal Aim Adjustment
Horizontal aim should not be required
although it is adjustable. We recommend
that you see an authorized dealer.
ADJUSTING THE HEADLAMPS
- RHD
Vertical Aim
Headlamp Aim Target
E142592
A 8 ft (2.4 m).
B Center height of headlamp to
the ground.
C 25 ft (7.6 m).
D Horizontal reference line.
Vertical Aim Adjustment
1. Park your vehicle on a level surface
approximately 7.6 m away from a
vertical wall or screen.
2. Apply the parking brake.
Endura (CDQ) New Zealand, enNZL, Edition date: 201712, First Printing
Maintenance
3. Measure the height from the center of
the headlamp to the ground.
Note: There may be an identifying mark on
the lens to help you locate the center of the
headlamp bulb.
4. Mark a horizontal reference line on the
vertical wall or screen that is a
minimum of 2.4 m long.
5. Switch the low beam headlamps on
and open the hood.
E209826
6. There is a distinct change from light to
dark in the right-hand portion of the
headlamp beam pattern. Position the
top edge of this cut-off 7.5 cm below
the horizontal reference line.
233