Lantronix Xpress-Pro SW 92000 User Manual
Lantronix xpress-pro sw 92000: user guide
Hide thumbs
Also See for Xpress-Pro SW 92000:
- Quick installation manual (3 pages) ,
- Supplementary manual (8 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Lantronix Xpress-Pro SW 92000
Summary of Contents for Lantronix Xpress-Pro SW 92000
-
Page 1: User Guide
XPress-Pro SW 92000 User Guide Part Number 900-505 Revision A May 2007... - Page 2 Copyright & Trademark © 2005, Lantronix. All rights reserved. No part of the contents of this book may be transmitted or reproduced in any form or by any means without the written permission of Lantronix. Printed in the United States of America.
-
Page 3: Table Of Contents
12VDC DC Jack _________________________________________________________ 9 Redundant DC Terminal Block Power Inputs___________________________________ 9 Alarms for Power and Port Failure __________________________________________ 10 Connecting to Your Network __________________________________________ 11 Cable Type & Length ____________________________________________________ 11 Cabling _______________________________________________________________ 11 A: Specifications B: Connector Pinouts XPress-Pro SW 92000... -
Page 4: 1: Preface
1: Preface A member of the growing family of rugged switches, this switch addresses a need for a smaller switch. This switch provides an affordable solution for rugged and outdoor environment, transportation road-side cabinet, industrial floor shop, multitenant dwellings or Fiber To The Home (FTTH) applications. -
Page 5: 2: Product Overview
2: Product Overview Hardened Compact Switch Package Contents When you unpack the product package, you shall find the items listed below. Please inspect the contents, and report any apparent damage or missing items immediately to your authorized reseller. This Switch User’s Manual... -
Page 6: Front Panel Display
Port failure occurred (when port fault alarm dip switch is enabled). FAULT Power failure is not occurred. (Red) Port failure is not occurred (when port fault alarm dip switch is enabled). 3. Port fault alarm dip switch is disabled. 10/100TX or 100FX A valid network connection established. -
Page 7: Physical Ports
Physical Ports This switch provides: Eight 10/100BaseTX ports Eight 10/100BaseTX ports + one 100BaseFX port Six 10/100BaseTX ports + two 100BaseFX ports Four 10/100BaseTX ports + four 100BaseFX ports Connectivity RJ-45 connectors SC, ST, VF-45 or MT-RJ connector on 100BaseFX fiber port. -
Page 8: 3: Installation
This chapter gives step-by-step instructions about how to install the switch: Selecting a Site for the Switch As with any electric device, you should place the switch where it will not be subjected to extreme temperatures, humidity, or electromagnetic interference. Specifically, the site you select should meet the following requirements: The ambient temperature should be between -34 to 74 degrees Celsius. -
Page 9: Connecting To Power
There are two pairs of power inputs can be used to power up this device. You only need to have one power input connected to run the switch. Connect the DC power cord to the plug-able terminal block on the switch, and then plug it into a standard DC outlet. -
Page 10: Alarms For Power And Port Failure
Note: The relay output is normal open position when there is no power to the switch. Please do not connect any power source to this terminal to prevent the shortage to your power supply. -
Page 11: Connecting To Your Network
5. Consult the previous section for cabling requirements based on connectors and speed. 6. Connect one end of the cable to the switch and the other end to a desired device. 7. Once the connections between two end devices are made successfully, turn on the power and the switch is operational. -
Page 12: A: Specifications
A: Specifications Specification Hardened Compact Switch Applicable Standards Switching Method Forwarding Rate 10BaseT: 100BaseTX/FX: Performance Cable 10BaseT: 100BaseTX: 100BaseFX: LED Indicators Dimensions Net Weight Power Operating Voltage & Max. Current Consumption Power Consumption Operating Temperature Storage Temperature Humidity Safety Emissions... -
Page 13: B: Connector Pinouts
B: Connector Pinouts The following table lists the pinout of 10/100BaseT/TX ports. Regular Ports Input Receive Data + Input Receive Data - Output Transmit Data + Output Transmit Data - XPress-Pro 92000 SW User Guide Pin arrangement of RJ-45 connectors Uplink port Output Transmit Data + Output Transmit Data -...