Front Panel Display - Lantronix Xpress-Pro SW 92000 User Manual

Alarms for power and port failure by relay output.
Operating voltage and Max. current consumption: 12VDC @ 0.99A, 24VDC @
0.55A, 48VDC @ 0.39A. Power consumption: 18.72W Max.
Power Supply: Redundant DC Terminal Block power inputs or 12VDC DC
JACK with 124-240VAC external power supply.
Supports Din-rail mounting installation.

Front Panel Display

LED State
POWER
PWR1 Steady
PWR2
Off
(Green)
FAULT
Steady
FAULT
(Red)
Off
10/100TX or 100FX
Steady
LNK/ACT
(Green)
Flashing
100 Steady
(Yellow)
Off
XPress-Pro 92000 SW User Guide
Indication
Switch is properly connected to power and turned on.
Switch is not connected to power and is turned off.
Power failure occurred.
Port failure occurred (when port fault alarm dip switch is enabled).
Power failure is not occurred.
Port failure is not occurred (when port fault alarm dip switch is enabled).
3. Port fault alarm dip switch is disabled.
A valid network connection established.
LNK stands for LINK.
Transmitting or receiving data.
ACT stands for ACTIVITY.
Light solid yellow for a port transferring at 100Mbps.
The port is transferring at 10Mbps If this LED is dark.
2:Product Overview
6