Using My Device - Managed Features; Accessing My Secure Files; Unlocking In Read-Only Mode - Kingston Technology IronKey 1000E User Manual

3. Depending on the policy created by your System Administrator, you may be required to create
an Online Account. An email will be provided to the end user with the instructions on how to
create an online account. After the account has been confirmed, click OK.
• The user will receive an Online Account Error message if the online account has not been
4. Choose a Secure Volume File System (see
5. The device will now finalize the setup process and be ready for use. Access the encrypted
storage by clicking the Folder Icon in the top menu. The settings of the device can be
accessed and altered by clicking the Gear Icon. See the
information.

Using My Device - Managed Features

Accessing My Secure Files

After unlocking the device, you can access your secure files. Files are automatically encrypted and
decrypted when you save or open them on the drive. This technology gives you the convenience
of working as you normally would with a regular drive, while providing strong, "always-on" security.
To access your secure files:
1. Click Files on menu bar of the IronKey Control Panel.
• Windows: Opens Windows Explorer to the IRONKEY SECURE FILES USB drive.
• macOS: Opens Finder to the KINGSTON USB drive.
2. Do one of the following:
• To open a file, double-click the file on the S1000E USB drive.
• To save a file, drag the file from your computer to the S1000E USB drive.
Hint: You can also access your files by right-clicking the IronKey Icon in the Windows taskbar
and clicking Secure Files.

Unlocking In Read-Only Mode

You can unlock your device in a read-only state so that files cannot be altered on your secure drive.
For example, when using an untrusted or unknown computer, unlocking your device in Read-Only
Mode will prevent any malware on that computer from infecting your device or modifying your files.
Managed devices can be forced to unlock in a read-only state by an administrator.
When working in this mode, the IronKey Control Panel will display the text Read-Only Mode. In
this mode, you cannot perform any operations that involve modifying files on the device. For
example, you cannot reformat the device, restore applications or edit the Applications List, or edit
files on the drive.
To unlock the device in Read-Only Mode:
1. Insert the device into the USB port of the host computer and run the IronKey.exe.
2. Check the Read-Only Checkbox below the password entry box.
3. Type your device password and click Unlock. The IronKey Control Panel will appear with the
text Read-Only Mode at the bottom.
created or there was an issue while attempting to verify the account.
Formatting My Device) and click Continue.
IronKey Control Panel for more
9