Assembling The Holder - Oki PRO330S Manual

Assembling the holder

Assemble the holder to be used according to the roll paper to be used.
If the inner diameter of the roll paper is 76.2 mm (3 inches), use the flange (large).
If the inner diameter of the roll paper is 50.8 mm (2 inches), use the flange (small).
The plates of the holder are applicable to both kinds of roll paper.
The flanges are not attached to the plates of the holder when they are unpacked. Select the
flange (large) or flange (small) according to the inner diameter of the roll paper to be used,
and start from Step 4.
This section takes the example of changing from the flange (large) to the flange (small).
• The paper-width guide is in the minimum size position when it is unpacked. Fit it to the width of the roll pa-
per. For details, see
1
Remove the holder from the stand.
"Loading paper" (Page 73).
Holder
Stand
- 24 -