Cleaning The Surface Of The Belt Unit - Oki PRO330S Manual

Cleaning the surface of the belt unit

• This procedure is applicable to cases when there are glue or paper residues on the belt unit. (You can
check for any glue or paper residues by rotating the belt unit once.)
• Clean with the wipe solution (free of water).
1
Take off your watch or bracelet.
2
Open the left cover on the front, and press and hold the power switch for
approximately 1 second.
After a while, the LED indicator of the «POWER» button will light off.
3
After "SHUTTING DOWN. PLEASE WAIT/TURN OFF AUTOMATICALLY"
appears on the operator panel, wait until the operator panel goes off.
4
Disconnect the power plug from the outlet.
5
Unplug the power cord from the power connector on the back of the machine.
- 136 -