Oki PRO330S Manual page 43

Then, set the network information like the IP address on this machine.
5
Power on this machine.
6
Press « ∧ » or « ∨ » several times to display [ADMIN SETUP], and press «OK».
7
Input the password when [ENTER PASSWORD] is displayed.
• The default password is "999999".
8
After you have input the password, press «OK».
9
Press « ∧ » or « ∨ » several times to display [NETWORK SETUP], and press «OK».
10
Press « ∧ » or « ∨ » several times to display [IP ADDRESS SET], and press «OK».
11
Press « ∧ » or « ∨ » several times to display [AUTO] or [MANUAL], and press «OK».
If [MANUAL] is selected, press « ∨ » and manually input the IPv4 address, subnet
mask, and gateway address.
- 43 -