Export - Revopoint 3D Technologies POP2 User Manual

POP 2 3D Scanner User Manual

Export

Click to export the 3D model.
Select a file format (obj., stl., & ply. are supported) and a file name.
HINT: It would be convenient to select the file folder named "handylookdata" because that is the default directory for Handy Studio.
If you save the scanned 3D model as a .PLY file
NAME.ply (Point Cloud)
NAME_mesh.ply (Mesh no color)
NAME_mesh_tex.ply (Mesh with color)
NAME_mesh_tex.jpg (Texture color image)
If you save the 3D model as an .STL file:
NAME.stl (Point Cloud)
NAME_mesh.stl (Mesh no color)
**color models are not saved in the STL file format
17
COPYRIGHT ©2021 REVOPOINT 3D ALL RIGHTS RESERVED
File Naming Conventions
If you save the 3D model as an .OBJ file:
NAME.obj (Point Cloud)
NAME_mesh.obj (Mesh no color)
NAME_mesh_tex.obj (Mesh with color)
NAME_mesh_tex.mtl
NAME_mesh_tex.jpg (Texture color image)
NOTE:
NAME_mesh_tex.obj,
NAME_mesh_tex.mtl &
NAME_mesh_tex.jpg are the three components of a color 3D model in the
OBJ file format.