Start/Pause Scan - Revopoint 3D Technologies POP2 User Manual

POP 2 3D Scanner User Manual
Color: The object to be scanned has both color and shape information in the scanned 3D model.
No color: The scanned model has no color information; only the shape information is captured.
"No color" is by default. If you want a color 3D model, please be sure to select "Color" in the Texture section.

Start/Pause Scan

Click / to Start/Pause scan. The number above the Start button is the countdown before scanning starts.
Before scanning, please remove all distracting objects and make sure no irrelevant stuff is in the scanning area.
During scanning, please make sure the point cloud in the lower left window is adequate and the distance remains "Excellent". Move the scanner
slowly and deliberately during scanning while keeping a relatively fixed distance. Already-scanned sections of the model are displayed in blue.
Unless there are holes in the scan, there is no advantage to continuing to scan a blue area (and it will waste memory and processing time).
13
COPYRIGHT ©2021 REVOPOINT 3D ALL RIGHTS RESERVED