Revopoint 3D Technologies POP2 User Manual page 12

Hide thumbs Also See for POP2:

Table of Contents

POP 2 3D Scanner User Manual

underexposure.

·IR camera:

(Lower left preview window) When available, switch to "Auto" to find the best overall exposure and then to "Manual" to

prevent Handy Scan from continually adjusting the exposure during the scanning process and possibly locking the user

interface.

Adjust Distance

The top area of the 3D model preview window shows the distance. Place the POP 2 scanner or the object to confirm an "Excellent" distance and

keep it during scanning. If you want better details than the standard, you can move the POP 2 closer to the object, but tracking can be a problem.

Click "Auto" first, then "Manual".

May enter infinite loop if "Auto" is left on.

Keep the distance at "Excellent" during scanning. Using the "Too

near" distance does create a model with higher accuracy, but it is

also more likely to lose tracking.

Make sure the infrared image (lower left) and point cloud image

(center window) are identical.

If the point cloud (center window) is empty, click

the HOME icon to re-center the model on the

screen.

Table of Contents

Need help?

Do you have a question about the POP2 and is the answer not in the manual?