Monitoring And Maintenance - Ruijie RG-AP850-I-V2 Series Hardware Installation And Reference Manual

Hardware Installation and Reference Guide

5 Monitoring and Maintenance

5.1 Monitoring
LED
You can observe the LED to monitor the AP in operation.
CLI Commands
Run related commands on the command line interface (CLI) on the wireless controller to remotely monitor the
configurations and status of the AP.
You can log in to the AP via Telnet and use monitoring related commands to maintain the AP.
5.1.1 Remote Maintenance

If the AP operates as a Fat AP, you can log in to the AP remotely for maintenance.

If the AP operates as a Fit AP, you can use the wireless controller to centrally manage and maintain the AP.
5.1.2 Hardware Maintenance
If the hardware is faulty, please contact our Technical Assistance Center (TAC) for help.
Monitoring and Maintenance
·