Table of Contents
Advertisement
14.2 Load/Store all Settings
This option allows to save the whole state of the unit as Setup in 9 memory slots. The EQ Presets
are not included, they are stored separately and are available for any setup. The current state of
the EQ is also stored, and written to the EQ memory slot Manual during load of a Setup.
The page Setups, Load/Store all Settings, has the following entries:
Setup Select
Choices are Load 1-9, Factory (Reset All) and Store 1-9.
Load Volume
with Setup, disabled. Setups stored in the unit can be loaded
with or without loading the volume setting stored in the Setup.
Selecting disabled the current volume will not be changed.
Name
Allows to edit the name of the Setup during the store process.
To edit an existing name load the respective Setup and store
it on the same memory slot with edited name. See EQ - Name
for details about the Edit operation.
Start
Press 1s. Pressing and holding encoder 2 for at least one sec-
ond triggers the action selected (Load or Store).
Returning to Factory State
Hold encoder 1 and the VOL button pushed while turning on the unit. The screen will show Reset
Done. All current settings are reset to factory default, user-stored Setups and EQ presets are not
affected. The same action is performed by loading Factory via Setup Select.
Note: The reset will be incomplete when the unit is connected to USB while performing the reset.
When holding encoder 1, 2 and the VOL button pushed while turning on the unit, user-stored
Setups and EQ Presets are also reset.
User's Guide ADI-2/4 Pro SE – v 1.0
33
Advertisement
Table of Contents
