Table of Contents
Advertisement
37. Appendix
RME news, driver updates and further product information are available on RME's website:
https://www.rme-audio.com
Worldwide distribution: Audio AG, Am Pfanderling 60, D-85778 Haimhausen, Tel.: (49) 08133 /
918170
Support via e-mail:
support@rme-audio.com
List of international supporters:
RME user forum:
https://forum.rme-audio.de
Acknowledgements
The Bauer Binaural Crossfeed effect in the ADI-2/4 Pro SE was inspired by Boris Mikhaylov's
bs2b implementation.
Trademarks
All trademarks, registered or otherwise, are the property of their respective owners. RME,
DIGICheck and Hammerfall are registered trademarks of RME Intelligent Audio Solutions. Sync-
Check, SyncAlign, TMS, TotalMix, SteadyClock, ADI-2/4 Pro SE and Extreme Power are trade-
marks of RME Intelligent Audio Solutions. Alesis and ADAT are registered trademarks of Alesis
Corp. ADAT optical is a trademark of Alesis Corp. Microsoft, Windows 7/8/10/11 are registered
trademarks or trademarks of Microsoft Corp. Apple, iPad, iPhone and Mac OS are registered
trademarks of Apple Inc. ASIO is a registered trademark of Steinberg Media Technologies GmbH.
Copyright Matthias Carstens, 10/2022. Version 1.0
Current driver version Windows: 0.9795
Firmware: FPGA 67, DSP 21, 10/2022
Although the contents of this User's Guide have been thoroughly checked for errors, RME can not guarantee
that it is correct throughout. RME does not accept responsibility for any misleading or incorrect information
within this guide. Lending or copying any part of the guide or the RME Driver CD, or any commercial exploi-
tation of these media without express written permission from RME Intelligent Audio Solutions is prohibited.
RME reserves the right to change specifications at any time without notice.
Note on Disposal
According to the guide line RL2012/19EU (WEEE – Directive on Waste
Electrical and Electronic Equipment), valid for all european countries, this
product has to be recycled at the end of its lifetime.
In case a disposal of electronic waste is not possible, the recycling can
also be done by Audio AG.
For this the device has to be sent free to the door to:
Audio AG
Am Pfanderling 60
D-85778 Haimhausen
Germany
Shipments not prepaid will be rejected and returned on the original sender's costs.
https://www.rme-audio.de/support.html
User's Guide ADI-2/4 Pro SE – v 1.0
113
Advertisement
Table of Contents
